The HADES project (High Activity Disposal Experimental Site) aims at demonstrating the technical feasibility and the long-term safety of geological disposal of reprocessed HLW (High-Level Wastes) radioactive wastes. This disposal could be realised in the Tertiary Boom clay formation below the Mol/Dessel nuclear site. Previous studies in the 80's on the geomechanical behaviour of Boom clay, at host rock temperature (15°C), have demonstrated the mining capabilities of this clay. European partners have collaborated to increase the number of in-situ tests to be developed and operated from the Underground Research Facility (URF). Integrated large-scale experiments have been developed during the last four years, within the framework of the Commission of the European Communities (CEC) research contracts, in order to gain more insight into the thermal influence of heat-emiting wastes on the clay behaviour in the near field.
This paper summarizes the knowledge gained from the in-situ hydro-thermo-mechanical experiments realised from the URF. The objectives and main issues of the tests are described. Information regarding selection of parameters and representativeness of their measurements is discussed. Despite their different aims and designs, three hydro-thermo-mechanical experiments are compared in order to emphasize similarities in the general behaviour of the clay massif submitted to a thermal load. It is observed that its behaviour is qualitatively similar to the reaction upon a constant total stress increase. With the information now available, it is not obvious to draw conclusions with respect to the irreversibility of some phenomena.
Simple in-house analytical codes are able to simulate with a good accuracy the hydro-thermo-mechanical behaviour of clay. Nevertheless, these codes are not sufficient to describe the complexity of the phenomena that are involved in hydro-thermo-mechanical processes as pointed out by field data. In order to validate more complex models, the possibilities to improve the representativeness of the measurements are investigated. 相似文献
The understanding of the thermo-hydro-mechanical behaviour of a clay barrier is needed for the prediction of its final in situ properties after the hydration and thermal transient in a radioactive waste repository.
As part of the CEC 1990–1994 R&D programme on radioactive waste management and storage, the CEA (Fr), CIEMAT (Sp), ENRESA (Sp), SCK · CEN (B), UPC (Sp) and UWCC (UK) have carried out a joint project on unsaturated clay behaviour (Volckaert et al., 1996). The aim of the study is to analyse and model the behaviour of a clay-based engineered barrier during its hydration phase under real repository conditions. The hydro-mechanical and thermo-hydraulic models developed in this project have been coupled to describe stress/strain behaviour, moisture migration and heat transfer. A thermo-hydraulic model has also been coupled to a geochemical code to describe the migration and formation of chemical species.
In this project, suction-controlled experiments have been performed on Boom clay (B), FoCa clay (Fr) and Almeria bentonite (Sp). The aim of these experiments is to test the validity of the interpretive model developed by Alonso and Gens (Alonso et al., 1990), and to build a database of unsaturated clay thermo-hydro-mechanical parameters. Such a database can then be used for validation exercises in which in situ experiments are simulated.
The Boom clay is a moderately swelling clay of Rupellian age. It is studied at the SCK · CEN in Belgium as a potential host rock for a radioactive waste repository. In this paper, suction-controlled experiments carried out on Boom clay by SCK · CEN are described. SCK · CEN has performed experiments to measure the relation between suction, water content and temperature and the relation between suction, stress and deformation. The applied suction-control techniques and experimental setups are detailed. The results of these experiments are discussed in the perspective of the model of Alonso and Gens. The influence of temperature on water uptake was rather small. The measured swelling-collapse behaviour can be explained by the Alonso and Gens model. 相似文献
A Geographic Information System (GIS) is used to prepare and process digital geoscience data in a variety of ways for producing gold prospectivity maps of the Swayze greenstone belt, Ontario, Canada. Data used to produce these maps include geologic, geochemical, geophysical, and remotely sensed (Landsat). A number of modeling methods are used and are grouped into data-driven (weights of evidence, logistic regression) and knowledge-driven (index and Boolean overlay) methods. The weights of evidence (WofE) technique compares the spatial association of known gold prospects with various indicators (evidence maps) of gold mineralization, to derive a set of weights used to produce the final gold prospectivity map. Logistic regression derives statistical information from evidence maps over each known gold prospect and the coefficients derived from regression analysis are used to weight each evidence map. The gold prospectivity map produced from the index overlay process uses a weighting scheme that is derived from input by the geologist, whereas the Boolean method uses equally weighted binary evidence maps.The resultant gold prospectivity maps are somewhat different in this study as the data comprising the evidence maps were processed purposely differently for each modeling method. Several areas of high gold potential, some of which are coincident with known gold prospects, are evident on the gold prospectivity maps produced using all modeling methods. The majority of these occur in mafic rocks within high strain zones, which is typical of many Archean greenstone belts. 相似文献
This study identifies isotope signatures associated with autotrophic and heterotrophic microbial communities that may provide a means to determine carbon cycling relationships in situ for acid mine drainage (AMD) sites. Stable carbon isotope ratios (δ13C) of carbon sources, bulk cells, and membrane phospholipids (PLFA) were measured for autotrophic and heterotrophic microbial enrichment cultures from a mine tailings impoundment in northern Ontario, Canada, and for pure strains of the sulfur oxidizing bacteria Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans. The autotrophic enrichments had indistinguishable PLFA distributions from the pure cultures, and the PLFA cyc-C19:0 was determined to be a unique biomarker in this system for these sulfur oxidizing bacteria. The PLFA distributions produced by the heterotrophic enrichments were distinct from the autotrophic distributions and the C18:2 PLFA was identified as a biomarker for these heterotrophic enrichments. Genetic analysis (16S, 18S rRNA) of the heterotrophic cultures indicated that these communities were primarily composed of Acremonium fungi.Stable carbon isotope analysis revealed that bulk cellular material in all autotrophic cultures was depleted in δ13C by 5.6–10.9‰ relative to their atmospheric CO2 derived carbon source, suggesting that inorganic carbon fixation in these cultures is carbon limited. Individual PLFA from these autotrophs were further depleted by 8.2–14.6‰ compared to the bulk cell δ13C, which are among the largest biosynthetic isotope fractionation factors between bulk cell and PLFA reported in the literature. In contrast, the heterotrophic bulk cells were not significantly fractionated in δ13C relative to their carbon source and heterotrophic PLFA ranged from 3‰ enriched to 4‰ depleted relative to the isotopic composition of their total biomass. These distinct PLFA biomarkers and isotopic fractionations associated with autotrophic and heterotrophic activity in this laboratory study provide potential biomarkers for delineating autotrophic and heterotrophic carbon cycling in AMD environments. 相似文献
Coupled S speciation and acid generation resulting from S processing associated with five different microbial treatments, all primarily Acidithiobacillus spp. (i.e. autotrophic S-oxidizers) were evaluated in batch laboratory experiments. Microbial treatments included two culture-adapted strains, Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans, their consortia and two environmental enrichments from a mine tailings lake that were determined to be >95% Acidithiobacillus spp., by whole-cell fluorescent hybridization. Using batch experiments simulating acidic mine waters with no carbon amendments, acid generation, and S speciation associated with the oxidation of three S substrates (thiosulfate, tetrathionate, and elemental S) were evaluated. Aseptic controls showed no observable pH decrease over the experimental time course (1 month) for all three S compounds examined. In contrast, pH decreased in all microbial treatments from starting pH values of 4 to 2 or less for all three S substrates. Results show a non-linear relationship between the pH dynamics of the batch cultures and their corresponding sulfate concentrations, and indicate how known microbial S processing pathways have opposite impacts, ultimately on pH dynamics. Associated geochemical modeling indicated negligible abiogenic processes contributing to the observed results, indicating strong microbial control of acid generation extending over pH ranges from 4 to less than 2. However, the observed acid generation rates and associated S speciation were both microbial treatment and substrate-specific. Results reveal a number of novel insights regarding microbial catalysis of S oxidation: (1) metabolic diversity in S processing, as evidenced by the observed geochemical signatures in S chemical speciation and rates of acid generation amongst phylogenetically similar organisms (to the genus level); (2) consortial impacts differ from those of individual strain members; (3) environmental enrichments of Acidithiobacillus spp. catalyze different S reaction arrays than pure strain Acidithiobacillus spp.; and (4) microbial catalysis of S reactions involves significant disproportionation tied to substantial H+ consumption, with the formation of as yet, poorly characterized intermediate S species, most likely polythionates and polysulfane monosulfonic acids that are thought to be involved in microbial S storage mechanisms. 相似文献
The efficiency of serpentinite as an alternative alkalinity generating material for the passive treatment of acid mine drainage (AMD) was assessed in the laboratory. Three series of batch experiments were designed for the passive treatment of a low pH (1.6) AMD synthetic solution containing 2,500 ppm Fe2+, 6,600 ppm SO42–, 10.5 ppm Al, 15 ppm Ni, and traces of Cr, Mn and Cu. The influencing factors studied were: the effect of water/rock ratio, residence time, type of the alkalinity generating material (dolomite, magnesite, marble, serpentinite), and nature of the system (open vs. closed cells). The variations in solution chemistry observed in the open cells indicate that a lower water/rock ratio (0.33 ml/g) was the most efficient for metals removal. The optimal residence time in open cells was 24 h to reach the higher pH values. In the closed cells laboratory setup, synthetic AMD was placed in contact with the various alkaline materials for three different contact times (24, 48, 72 h). The optimal pH was reached after 48 h and did not change appreciably for longer contact time, and the best results for metal removals were obtained with marble and serpentinite. Single treatment efficiency was compared with a successive treatment approach. The most promising results were obtained with a five step treatment: (1) pre-treatment in a closed cell using serpentinite, (2) aeration and settling, (3) treatment in an open cell using marble, (4) final aeration and settling, and (5) filtration with a coarse silica sand. With this configuration, the final pH was 6.5 and pronounced metals depletion was achieved (100% for Al, 99.95% for Fe, 85.7% for Ni). 相似文献
Early life stages from a marine fish species, Fundulus heteroclitus, were exposed to sublethal doses of 3,3',4,4',5 pentachlorobiphenyl (PCB126) to evaluate its effects on ecologically relevant responses: growth and behavior. A few hours after fertilisation, eggs were treated topically with PCB126 (2.5-50 pg egg?1). Four days post-hatching (dph), morphological changes (body length and malformations), spontaneous locomotor activity (active swimming speed, rate of travel, % inactivity), prey capture ability (Artemia franciscana nauplii) and whole body EROD activity were evaluated in larvae. Untreated larvae collected at 0.5, 1, 2, 3, 4 dph were also examined. PCB126 did not increase the mortality or malformation rates. Body length and spontaneous locomotor activity were altered only in larvae treated with the highest dose. Treatment with PCB126 caused a dose-responsive reduction in prey capture ability (rate of decline in the number of Artemia) and induction of EROD activity. The lowest observed effective dose for both of these responses was 5.0 pg PCB126 egg?1 or 5.0 TCDD-toxic equivalents pg g?1 egg, using a TCDD-toxic equivalent factor of 0.005 and an egg mass of 5 mg. Prey capture efficiency (number of Artemia captured per feeding strike) was reduced at ≥ 10.0 pg egg?1. In untreated developing larvae, prey capture ability and efficiency increased as post-hatching development progressed and EROD activity remained low. The pattern of behavioral responses observed in PCB126-exposed Fundulus larvae differed from that observed in less-developed larvae indicating that other mechanisms than retarded development were involved. Behavioral dysfunction was a more sensitive response to PCB126 than morphological alterations and it occurred at environmentally relevant concentrations. 相似文献
With the long-term goal of developing an operational forecast system for total water level, we conduct a hindcast study of global storm surges for Fall 2014 using a baroclinic ocean model based on the NEMO framework. The model has 19 vertical levels, a horizontal resolution of 1/12°, and is forced by hourly forecasts of atmospheric wind and air pressure. Our first objective is to evaluate the model’s ability to predict hourly sea levels recorded by a global array of 257 tide gauges. It is shown that the model can provide reasonable predictions of surges for the whole test period at tide gauges with relatively large tidal residuals (i.e., gauges where the standard deviation of observed sea level, after removal of the tide, exceeds 5 cm). Our second objective is to quantify the effect of density stratification on the prediction of global surges. It is found that the inclusion of density stratification increases the overall predictive skill at almost all tide gauges. The increase in skill for the instantaneous peak surge is smaller. The location for which the increase in overall skill is largest (east coast of South Africa) is discussed in detail and physical reasons for the improvement are given. 相似文献
