排序方式： 共有11条查询结果，搜索用时 644 毫秒
1.
Molar tooth (MT) structures are enigmatic, contorted millimetre‐ to decimetre‐long veins and spheroids of microcrystalline calcite that formed during very early diagenesis in Precambrian sediments. MT structures in the ca 2·6 Ga Monteville Formation are 600–800 Myr older than previously reported occurrences and establish that conditions necessary for MT genesis were met locally throughout much of the Precambrian. In the Monteville Formation, MT structures were formed shallow subtidally, extending to depths near storm wave base, in shale host sediments intercalated with storm‐generated carbonate sand lenses. They are filled with microcrystalline calcite and rare pyrite. Microcrystalline calcite identical to that in MT structures fills other pore space, including porosity between grains in carbonate sand lenses, moldic porosity in sand grains, sheet cracks in columnar stromatolites, and shallow cracks on sandy bedding planes. Relationships in the Monteville Formation demonstrate that microcrystalline CaCO3 precipitated in fluid‐filled cracks and pores; microcrystalline calcite characteristics, as well as the paucity of carbonate mud in host rocks, are inconsistent with injection of lime mud as the origin of MT structures. Locally, MT cracks were filled by detrital sediment before or during precipitation. Precipitation occurred in stages, and MT CaCO3 evolved from granular cores to a rigid mass of cores with overgrowths – allowing both plastic and brittle deformation of MT structures, as well as reworking of eroded MT structures as rigid clasts and lime mud. Crystal size distributions and morphology suggest that cores precipitated through nucleation, Ostwald ripening and size‐dependent crystal growth, whereas overgrowths formed during size‐independent crystal growth. 相似文献
2.
DAWN BOWEN 《Geographical review》2002,92(4):503-525
ABSTRACT. Since the early 1980s some 40,000 acres of forested land have been cleared and placed under cultivation by Mennonite farmers near the small town of La Crete in northern Alberta's Peace River district. This incipient agriculture has been accompanied by dramatic increases in road building and home construction and by the establishment of churches and schools. The principal force behind the acquisition of land has been a desire of families to have homes in rural areas where they can enjoy lifestyles based on traditional Mennonite values. Because most new farmers cannot earn a living in the district from agriculture alone, they must rely on the wood industries to supplement their incomes. Demand is building for the province to open still more land, but disagreements between the government and the Mennonite community about the most appropriate location for developing new farms has put further expansion on hold until the conflict can be resolved. 相似文献
3.
A. N. BOWEN 《Geophysical Prospecting》1986,34(3):366-382
Wiener ‘spiking’ deconvolution of seismic traces in the absence of a known source wavelet relies upon the use of digital filters, which are optimum in a least-squares error sense only if the wavelet to be deconvolved is minimum phase. In the marine environment in particular this condition is frequently violated, since bubble pulse oscillations result in source signatures which deviate significantly from minimum phase. The degree to which the deconvolution is impaired by such violation is generally difficult to assess, since without a measured source signature there is no optimally deconvolved trace with which the spiked trace may be compared. A recently developed near-bottom seismic profiler used in conjunction with a surface air gun source produces traces which contain the far-field source signature as the first arrival. Knowledge of this characteristic wavelet permits the design of two-sided Wiener spiking and shaping filters which can be used to accurately deconvolve the remainder of the trace. In this paper the performance of such optimum-lag filters is compared with that of the zero-lag (one-sided) operators which can be evaluated from the reflected arrival sequence alone by assuming a minimum phase source wavelet. Results indicate that the use of zero-lag operators on traces containing non-minimum phase wavelets introduces significant quantities of noise energy into the seismic record. Signal to noise ratios may however be preserved or even increased during deconvolution by the use of optimum-lag spiking or shaping filters. A debubbling technique involving matched filtering of the trace with the source wavelet followed by optimum-lag Wiener deconvolution did not give a higher quality result than can be obtained simply by the application of a suitably chosen Wiener shaping filter. However, cross correlation of an optimum-lag spike filtered trace with the known ‘actual output’ of the filter when presented with the source signature is found to enhance signal-to-noise ratio whilst maintaining improved resolution. 相似文献
4.
A physical model for the transport and sorting of fine-grained sediment by turbidity currents 总被引：4，自引：0，他引：4
Turbidite muds in cores from the outer Scotian continental margin, off eastern Canada, contain abundant thin silt laminae. Graded laminated units are recognized in parts of this sequence. These represent single depositional events, and show a regular decrease in modal grain size and thickness of the silt laminae through the unit. A similar fining trend is shown by both silt and mud layers over hundreds of kilometres downslope. Textural analysis of individual laminae allows the construction of a dynamically consistent physical model for transport and sorting in muddy turbidity currents. Hydraulic sorting aggregates finer material to the top and tail regions of a large turbidity flow which then overspills its channel banks. Downslope lateral sorting occurs with preferential deposition of coarser silt grains and larger mud flocs. Depositional sorting by increased shear in the boundary layer separates clay flocs from silt grains and results in a regular mud/silt lamination. Estimates can be made of the physical parameters of the turbidity flows involved. They are a minimum of several hundreds of metres thick, have low concentrations (of the order of 10?3 or 2500 mg 1?1), and move downslope at velocities of 10-20 cm s?1. A 5 mm thick, coarse silt lamina takes about 10 h to deposit, and the subsequent mud layer ‘blankets’ very rapidly over this. A complete unit is deposited in 2-6 days which is the time it takes for the turbidity flow to pass a particular point. These thick, dilute, low-velocity flows are significantly different from the ‘classical’ turbidity current. However, there is mounting evidence in support of the new concept from laboratory observations and direct field measurements. 相似文献
5.
Molar tooth structures of the Neoarchean Monteville Formation, Transvaal Supergroup, South Africa. II: A wave-induced fluid flow model 总被引：3，自引：0，他引：3
Sedimentological, morphological, and geochemical characteristics of molar tooth (MT) structures in the ca 2·6 Ga Monteville Formation suggest a new fluid flow model for MT formation: (i) intercalated shales and carbonate sands were deposited near to above storm wave base; (ii) sediments cracked, forming an interconnected network of MT cracks that were also open to pores in sand lenses; (iii) storm waves pumped sea water into open MT crack networks, causing rapid microcrystalline carbonate nucleation, Ostwald ripening of nuclei, and growth of granular carbonate cores; some of these cores were transported by water flowing through the cracks; (iv) unfilled MT cracks collapsed, and filled MT ribbons deformed plastically as host sediments compacted and dewatered; (v) carbonate cores were overgrown by polygonal rims; and (vi) MT structures deformed brittlely with additional compaction and produced pebbly lags if reworked. MT cracks may have formed by multiple mechanisms; however, expansion of gas from organic decay and sediment heaving due to wave loading best explain MT crack morphology and are most consistent with the fluid flow model for MT CaCO3 presented here. 相似文献
6.
The Klipriviersberg Group is a small continental flood-typetholeiitic suite forming the basal unit of the Ventersdorp Supergroup,an undeformed late-Archaean supracrustal sequence covering 200000km2 in the SW part of the Kaapvaal Craton. From the base up,the Klipriviersberg Group consists of the Westonaria, Alberton,Orkney, Jeannette, Loraine, and Edenville formations, with amaximum combined thickness of 1–8 km. Samples were obtainedfrom several borehole cores in the Klerksdorp goldfield closeto the type area of the Klipriviersberg Group. This sample suiteincludes a detailed collection from a 1–36-km core intersection.These samples reveal that the Westonaria Formation is absentfrom the succession and that the Jeannette Formation is representedby a thin sequence of breccias. The remaining units are builtof lavas ranging from siliceous picrite basalts to tholeiiticandesites in composition. All lavas exhibit the effects of greenschistfacies metamorphism but igneous textures are well preservedand reveal that most lavas are aphyric to sparsely porphyritic.A well-developed geochemical stratigraphy exists in the lavasequence and is characterized by an upward trend from evolvedto primitive lavas. The Alberton (mg-number = 0.53–0.43;Zr= 108–137 ppm) and Orkney (mg-number = 0.51–O.42;Zr = 90–110ppm) lavas have a narrow compositional rangeand are more differentiated than the compositionally more variableLoraine/Edenville lavas (mg-number = 0.75 0.47; Zr = 34–97ppm). Unusual inter-element correlations in the Alberton andOrkney lavas suggest that magma mixing processes were importantin their petrogenesis. Compositional variation in the Loraine/Edenvillelavas is consistent with simple fractional crystallization dominatedby orthopyroxene. Collectively, all these lavas are light rareearth element (LREE)-enriched and have negative Nb-Ta, P, andTi anomalies on mid-ocean ridge basalt (MORB)- or primitivemantle-normalized abundance diagrams. In this they resemblemafic lavas from modern subduction-zone environments and manyArchaean and early Proterozoic siliceous high-magnesium basalts.The Klipriviersberg lavas also have initial Nd-isotopic compositionsthat cluster about the chondritic uniform reservoir (CHUR) valueregardless of degree of differentiation. It is unlikely thatcrustal contamination has influenced the composition of theKlipriviersberg lavas to any significant extent, and their geochemicalfeatures have probably been inherited from lithospheric mantlesources. 相似文献
7.
The nucleation and propagation of polygonal cracks in hydrous sulphate dunes at White Sands National Monument, New Mexico, are affected by water availability, transport through the sand and exchange with the atmosphere. These gypsum sands are cohesive enough to crack due to capillary forces and gypsum cements formed during evaporation. Surface cracks form five‐sided polygons with a variety of triple‐junction angles. Cracks extend down to variable depths and polygons increase in size with depth, showing a maturation similar to experimentally produced polygonal columns in drying corn starch. Results from two years of monitoring crack geometries, temperature and humidity demonstrate that cracks form when water is lost to the atmosphere through the transport of water vapour. Subsurface relative humidity below 5 to 10 cm is almost always maintained at 100% by the evaporation and condensation of water in thin films on grains. The amplitude of daily temperature and thus absolute humidity changes decreases with depth, consistent with lower evaporation and condensation rates with increasing depth. Changes in absolute humidity and the contrast between humidity in pore spaces versus the overlying atmosphere result in significant water loss from the dunes except during times of precipitation and frost/dew condensation. This water loss allows cracks to nucleate and propagate into the dunes. This study hypothesizes that crack tips propagate into sand to the depth at which thin films of water on grains are drying, and that this depth varies from the surface of the dune during precipitation events to depths greater than 45 cm when dunes are drier. 相似文献
8.
Airline networks and the international diffusion of severe acute respiratory syndrome (SARS) 总被引：2，自引：0，他引：2
In fewer than four months in 2003, severe acute respiratory syndrome (SARS) spread from China to 25 countries and Taiwan, becoming the first new, easily transmissible infectious disease of the twenty-first century. The role of air transport in the diffusion of the disease became obvious early in the crisis; to assess that role more carefully, this study relates the spatial-temporal pattern of the SARS outbreak to a measure of airline network accessibility. Specifically, the accessibility from those countries that were infected by SARS, beginning with China, to other countries was measured using airline schedules. The country-pair accessibility measure, along with other country-level factors relevant to the disease, were tested as determinants of the speed with which SARS arrived in infected countries as well as its failure to arrive in most countries. The analyses indicate that airline network accessibility was an especially influential variable but also that the importance of this variable diminished in the latter weeks of the outbreak. The latter finding is partly attributable to public health measures, particularly health screening in airports. The timing and geography of those measures are reviewed using data from media reports and interim World Health Organization (WHO) documents during the outbreak. The uneven effort to curtail the international diffusion of SARS suggests further planning is needed to develop a concerted response to contain future epidemics. 相似文献
9.
Ancient microbialites reflect interactions between microbial communities and environmental conditions. However, evaluating the relative roles of microbial community processes and environmental influences on microbialite morphology and internal fabric in the rock record can be challenging. The Neoproterozoic Beck Spring Dolomite preserves diverse microbialites, and thus provides an opportunity to explore the factors that influenced microbialite development locally. Stromatolitic, thrombolitic and composite microbialites are abundant in subtidal to upper intertidal carbonates in the Beck Spring Dolomite. Thrombolitic and composite microbialites have not been recognized previously in this unit, but compose much of the newly defined thrombolitic member. Stratigraphic relationships demonstrate that these three types of microbialites formed in close spatial and temporal association in subtidal to intertidal environments. The relative proportions and distributions of stromatolitic and thrombolitic microbialites vary with depositional environment; stromatolitic microbialites dominate in deeper intertidal to subtidal facies, whereas thrombolitic textures are more abundant in upper intertidal facies. Composite microbialites, composed of intermingled clotted and laminated textures, formed in all environments but are most abundant in intertidal facies. The broad environmental distribution of stromatolitic, thrombolitic and composite microbialites and the intermingling of textures suggest that laminated and clotted textures reflect diverse microbial community morphologies rather than environmental variations. Furthermore, the ca 750 Ma age of thrombolitic microbialites in the Beck Spring Dolomite requires that they formed without the influence of calcimicrobes or metazoans colonizing and grazing the microbial mat surface. Thus, these thrombolites provide further evidence that the biostratigraphic distribution of thrombolites cannot be uniquely attributed to evolution of calcifying and grazing organisms in the earliest Cambrian, and that older microbial communities were capable of producing clotted textures. 相似文献
10.
Modelling of turbidity currents on Navy Submarine Fan, California Continental Borderland 总被引：2，自引：1，他引：2
Several Holocene turbidites can be correlated across much of Navy Fan through more than 100 sediment core localities. The uppermost muddy turbidite unit is mapped throughout the northern half of the fan; its volume, grain-size distribution and the maximum height of deposition on the basin slopes are known. These parameters can be related to the precise channel morphology and mesotopography revealed by deep-tow surveys. Thus there is sufficient information to estimate detailed flow characteristics for this turbidity current as it moved from fan valley to distal basin plain. On the upper fan, the gradient and the increasing downstream width of the channel and only limited flow overspill suggest that the flow had a Froude number close to 1.0. The sediment associated with the channel indicates friction velocities of about 0.06 m s?1 and flow velocities of about 0.75 m s?1. Using this flow velocity and channel dimensions, sediment concentration (～2×10?3) and discharge are estimated, and from a knowledge of the total volume of sediment deposited, the flow duration is estimated to be from 2 to 9 days. It is shown that the estimates of Froude number, drag coefficient, and sediment concentration are not likely to vary by more than a factor of 2. On the mid-fan, the flow was much thicker than the height of the surface relief of the fan and it spread rapidly. The cross-flow slope, determined from the horizontal extent of turbidite sediment, is used to estimate flow velocity, which is confirmed by consideration of both sediment grain size and rate of deposition. This again allows sediment concentration and discharge to be estimated. The requirements of flow continuity, entrainment of water during flow expansion, and observed sediment deposition provide checks on all these estimates, and provide an integrated picture of the evolution of the flow. The flow characteristics of this muddy turbidity current are well constrained compared to those for more sand-rich late Pleistocene and early Holocene turbidity currents on the fan. 相似文献