Comet Hale-Bopp (C/1995 O1): UVSTAR-FUV Spectroscopy from the Space Shuttle     

Cristiano B. Cosmovici  Vojko Bratina  Gottfried Schwarz  Gianpaolo Tozzi  Michael J. Mumma  Roberto Stalio 《Astrophysics and Space Science》2006,301(1-4):135-143

We report here on unique post-perihelion (2.3 AU) measurements of Comet Hale-Bopp in the FUV-range (950–1250 Å) by means of the UVSTAR spectrometer from the space shuttle with the main purpose of searching for argon and other FUV emitters. New methods for separating the strong airglow emission at shuttle altitudes are here discussed in detail. Due to our low resolution (15 Å) and S/N ratio the possible rocket-borne detection of argon near perihelion (0.9 AU) could not be confirmed. New species as N₂ are suspected but difficult to separate from the strong airglow emission at shuttle altitudes. From the Lyα brightness (1.30± 0.08 kRy) a water production rate Q = 5.9 ± 0.4 × 10²⁹ molecules s^?1 could be derived and compared with other post-perihelion observations.  相似文献   

Trace-element contents and cathodoluminescence of “trapiche” rubies from Mong Hsu, Myanmar (Burma): geological significance     

V. Garnier  D. Ohnenstetter  G. Giuliani  P. Blanc  D. Schwarz 《Mineralogy and Petrology》2002,76(3-4):179-193

Summary ?Mong Hsu rubies of the “trapiche” type are sporadically seen in the gem market. However, they have never been described in the field. The study of the nature of solid inclusions, the variation of trace-element contents, as well as the cathodoluminescence behaviour of six “trapiche” rubies permit the conclusion that these rubies crystallised in the same geological environment (marble-type deposit) as the normal rubies from Mong Hsu: (1) Cr and V are the main chromophorous elements in both ruby types; they act, together with Ti, as activators or quenchers for cathodoluminescence; (2) calcite, dolomite, rutile, mica, diaspore, apatite, chlorite, and feldspar are solid inclusions found in both ruby types; (3) the presence of bastn?site in trapiche ruby and fluorite in non-trapiche ruby indicates the circulation of F-bearing fluids during ruby deposition; (4) the distribution of trace-element contents in the crystal is similar for both ruby types. In the Cr₂O₃ vs. Fe₂O₃ and Cr₂O₃ vs. Fe₂O₃/TiO₂ diagrams, the population fields of Mong Hsu “trapiche” and non-“trapiche” rubies overlap. They are distinct from those of rubies and sapphires hosted in basalts from South-east Asia. Received October 30, 2001; revised version accepted March 25, 2002  相似文献   

THE EUROPEAN MACROSEISMIC SCALE (MSK-92)     

G. Gunthal  R.M.W. Musson  J. Schwarz  M. Stucchi 《地学学报》1993,5(3):305-305

A new updated version of the MSK macroseismic intensity scale has been prepared by a Working Group of the European Seismological Commission and has been published in April 1993 (European Macroseismic Scale 1992: updated MSK scale, 1993, ed. by G. Grünthal, Cahiers du Centre Européen de Geodynamique et de Séismologie, no. 7).  相似文献   

Submarine-fan facies associations of the Upper Cretaceous and Paleocene Gottero Sandstone,Ligurian Apennines,Italy     

Tor H. Nilsen  Ernesto Abbate 《Geo-Marine Letters》1983,3(2-4):193-197

The Upper Cretaceous and Paleocene Gottero Sandstone was deposited as a small deep-sea fan on ophiolitic crust in a trench-slope basin. It was thrust northeastward as an allochthonous sheet in Early and Middle Cenozoic time. The Gottero, as thick as 1500 m, was probably derived from erosion of Hercynian granites and associated metamorphic rocks in northern Corsica. Outcrops of inner-fan channel, middle-fan channel and interchannel, outer-fan lobe, fan-fringe, and basin-plain facies associations indicate that the depositional model of Mutti and Ricci Lucchi for mixed-sediment deep-sea fans can be used. The original fan had a radius of 30 to 50 km.  相似文献   

On the estimation of mooring line characteristic resistance for reliability analysis     

Roberto Montes-Iturrizaga  Ernesto Heredia-Zavoni  Francisco Silva-Gonzlez 《Applied Ocean Research》2007,29(4):239-241

The main aim of this work is to derive a correct formulation for the characteristic resistance of a mooring line segment with lognormally distributed component resistances and substitute an equation proposed by Vazquez-Hernandez et al. [Vazquez-Hernandez AO, Ellwanger GB, Sagrilo LVS. Reliability-based comparative study for mooring lines design criteria. Appl Ocean Res 2006; 28(6):398–406] in a paper published in this journal, which is not correct. The mooring line is considered as a series system and the resistances of individual components of a line segment are statistically independent and identically distributed; furthermore, the case of normally distributed component resistances is also discussed. A comparison with the corresponding equation proposed by DNV-OS-E301 is given. Results show that the formula proposed by Vazquez-Hernandez et al. [Vazquez-Hernandez AO, Ellwanger GB, Sagrilo LVS. Reliability-based comparative study for mooring lines design criteria. Appl Ocean Res 2006; 28(6):398–406] overestimates quite significantly the characteristic resistance of a mooring line segment.  相似文献   

Boundary manifolds for energy surfaces in celestial mechanics     

Ernesto A. Lacomba  Carles Simó 《Celestial Mechanics and Dynamical Astronomy》1982,28(1-2):37-48

We complete Mc Gehee's picture of introducing a boundary (total collision) manifold to each energy surface. This is done by constructing the missing components of its boundary as other submanifolds. representing now the asymptotic behavior at infinity.It is necessary to treat each caseh=0,h>0 orh<0 separately. In the first case, we repeat the known result that the behavior at total escape is the same as in total collision. In particular, we explain why the situation is radically different in theh>0 case compared with the zero energy case. In the caseh<0 we have many infinity manifold components. and the general situation is not quite well understood.Finally, our results forh0 are shown to be valid for general homogeneous potentials.Paper presented at the 1981 Oberwolfach Conference on Mathematical Methods in Celestial Mechanics.The research conducted in this paper has been partially supported by CONACYT (México), under grant PCCBNAL 790178.Partially supported by an Ajut a l'Investigacio of the University of Barcelona.  相似文献   

Electrical resistivity structure of the eastern Moroccan Atlas System and its Tectonic implications     

G. Schwarz  H. G. Mehl  F. Ramdani  V. Rath 《International Journal of Earth Sciences》1992,81(1):221-235

The electrical resistivity structure of the crust and upper mantle of the Atlas Mountain System was studied using magnetotelluric and geomagnetic deep soundings. Field experiments were done in eastern Morocco along a traverse from the Anti Atlas to the Rides Rifaines in two campaigns in 1983 and 1988.Zones of very low electrical resistivity could be identified in the various structural settings at different depth ranges, most likely connected directly to the tectonic evolution of the mountain belts. A mid-crustal low resistivity layer with total conductance (thickness-resistivity ratio) of about 2000 Siemens stretches from the southern border of the High Atlas towards the Middle Atlas. This layer seems to characterize the base of crustal detachment, e.g., the plane for large horizontal overthrusting, and supports the idea of thick- and thin-skinned tectonics involved in Atlasic mountain building. In the western Middle Atlas an upper-crustal low resistivity layer (at depth < 10 km) was found in the area where volcanic activity was present, pointing towards a direct relation between low electrical resistivity and volcanic or postvolcanic events. North of the Middle Atlas resistivity structures change totally: The Pre and parts of the Sub-Rif have a highly conductive cover, presumably connected to the molasse basin. Total conductance was calculated to reach 6000 Siemens. No further conductive structures, like, e.g., the ones found beneath the High and Middle Atlas, are seen within the resistive crust, but at much greater depth within the upper mantle.

---

Zusammenfassung Im marokkanischen Atlas-System wurde der elektrische Widerstand der Kruste und des oberen Mantels mit magnetotellurischen und erdmagnetischen Tiefen-Sondierungen erkundet. Die Feldmessungen wurden in den Jahren 1983 und 1988 im östlichen Marokko entlang einer Traverse vom Anti Atlas bis in das Rif durchgeführt.In den einzelnen strukturellen Einheiten wurden in unterschiedlichen Krustentiefen Schichten sehr kleiner elektrischer Widerstände entdeckt, die direkt mit der tektonischen Entwicklung des Atlasgebirges verknüpft zu sein scheinen. Zwischen dem Südrand des Hohen Atlas und dem Mittleren Atlas im Norden erstreckt sich eine Zone sehr kleiner Widerstände (integrierte Leitfähigkeit etwa 2000 Siemens) in mittleren Krustentiefen. Diese Schicht scheint einen Bereich krustaler Ablösung zu kennzeichnen und kann als Basis einer weitspannigen Überschiebung angenommen werden. Diese Form der »thick- & thin-skinned« Tektonik scheint wesentlich am Prozess der Gebirgsbildung im Atlas beteiligt zu sein. Im westlichen Mittleren Atlas, im Bereich des jungen Vulkanismus, wurde eine gutleitende Zone in der oberen Kruste (Tiefe < 10 km) gefunden. Diese Beobachtung legt einen direkten Zusammenhang zwischen erhöhter elektrischer Leitfähigkeit und vulkanischen bzw. postvulkanischen Ereignissen nahe. Nördlich des Mittleren Atlas ändern sich die Widerstandsstrukturen sehr stark: Im Prä- und teilweise auch noch im Sub-Rif liegt eine sehr gut leitende Deckschicht (integrierte Leitfähigkeit etwa 6000 Siemens) über einem hochohmigen Basement. In der Kruste des Rif werden keine weiteren, tieferliegenden Schichten erhöhter Leitfähigkeit gefunden, wie sie z.B. unter dem Hohen Atlas vorliegen. Dagegen gibt es Hinweise auf Zonen hoher Leitfähigkeit im oberen Mantel.

---

Résumé Dans l'Atlas marocain la résistivité électrique de la croûte et du manteau supérieur a été étudiée à l'aide des sondages magnétotelluriques et géomagnétiques. Ces travaux ont été effectués le long d'une traverse menant de l'Anti-Atlas jusqu'au Rif durant les années 1983 et 1988.Dans différentes profondeurs de la croûte terrestre des zones de résistances électriques très basses ont pu être découvertes ce qui peut être attribué à l'évolution tectonique de l'Atlas. Une couche de résistances très basses (conductance vers 2000 Siemens) s'étend entre le bord au sud du Haut Atlas et l'Atlas Moyen au nord. Cette couche peut être le signe d'un détachement de l'écorce et d'une poussée très vaste. Cette forme tectonique »thick- & thin-skinned« semble être essentiellement responsable du processus de la formation orogénique de l'Atlas. Une zone de bonne conductance se trouve dans la croûte terrestre supérieure (profondeur < 10 km) dans l'ouest de l'Atlas Moyen aux environs de l'activité volcanique caractérisant une relation directe entre une haute conductance électrique et des événements volcaniques et post-volcaniques. Vers le nord de l'Atlas Moyen les structures de résistance subissent un changement total: Au Pré- et partiellement aussi au Subrif se trouve une bonne couche guide (conductance vers 6000 Siemens). Aucune autre couche de conductance supérieure — comme au-dessous du Haut Atlas — n'a été découverte dans la croûte du Rif. On en décèle, par contre, dans le manteau supérieur.

---

1983 1988 - . , , , . ( 2000 Si). , , . , »thick- & -thin-skinned«, , . , ( 10 ) . , - . : - , , - , : 6000 Si. . .

  相似文献   

Water vapor adsorption by sodium montmorillonite at −5°C     

Duwayne M. Anderson  Maurice J. Schwarz  Allen R. Tice 《Icarus》1978,34(3):638-644

A large amount of interest has recently been expressed pertaining to the quantity of physically adsorbed water by the Martian regolith. Thermodynamic calculations based on experimentally determined adsorption and desorption isotherms and extrapolated to subzero temperatures indicate that physical adsorption of more than one or two monomolecular layers is highly unlikely under Martian conditions. Any additional water would find ice to be the state of lowest energy and therefore the most stable form. To test the validity of the thermodynamic calculations we have measured adsorption and desorption isotherms of sodium montmorillonite at ?5°C. To a first approximation it was found to be valid.  相似文献   

Pneumatic structures in the cervical vertebrae of the Late Jurassic Tendaguru sauropods Brachiosaurus brancai and Dicraeosaurus     

Daniela Schwarz  Guido Fritsch 《Swiss Journal of Geoscience》2006,99(1):65-78

  相似文献   

Stratigraphic evolution of a fluvial–eolian succession: The example of the Upper Jurassic—Lower Cretaceous Guará and Botucatu formations, Paraná Basin, Southernmost Brazil     

Claiton M.S. Scherer  Ernesto L.C. Lavina 《Gondwana Research》2006,9(4):475-484

The Guará and Botucatu formations comprise an 80 to 120 m thick continental succession that crops out on the western portion of the Rio Grande do Sul State (Southernmost Brazil). The Guará Formation (Upper Jurassic) displays a well-defined facies shift along its outcrop belt. On its northern portion it is characterised by coarse-grained to conglomeratic sandstones with trough and planar cross-bedding, as well as low-angle lamination, which are interpreted to represent braided river deposits. Southwards these fluvial facies thin out and interfinger with fine- to medium-grained sandstones with large-scale cross-stratification and horizontal lamination, interpreted as eolian dune and eolian sand sheets deposits, respectively. The Botucatu Formation is characterised by large-scale cross-strata formed by successive climbing of eolian dunes, without interdune and/or fluvial accumulation (dry eolian system). The contact between the Guará and the Botucatu formations is delineated by a basin-wide deflation surface (supersurface). The abrupt change in the depositional conditions that took place across this supersurface suggests a major climate change, from semi-arid (Upper Jurassic) to hyper-arid (Lower Cretaceous) conditions. A rearrangement of the Paraná Basin depocenters is contemporaneous to this climate change, which seems to have changed from a more restrict accumulation area in the Guará Formation to a wider sedimentary context in the Botucatu Formation.  相似文献