排序方式： 共有25条查询结果，搜索用时 31 毫秒
1.
Estimation of near surface soil moisture in a sloping terrain of a Himalayan watershed using ENVISAT ASAR multi‐incidence angle alternate polarisation data 
下载免费PDF全文
下载免费PDF全文 Soil moisture is one of the important input variables in hydrological and water erosion models. The extraction of information on near surface soil moisture from synthetic aperture radar (SAR) is well established mostly for flat terrain and using low incidence angle single polarisation data. The ENVISAT advanced SAR (ASAR) data available in multiple incidence angles and alternate polarisation modes were investigated in this study for soil moisture estimation in sloping terrain. The test site was Sitla Rao watershed in the Lesser Himalayas of northern India. Empirical models were developed to estimate near surface soil moisture in bare agricultural fields using alternate polarisation ASAR data. Both soil moisture and surface roughness field measurements were performed during the satellite passes. Backscatter from medium incidence angle (IS‐4) and vertical‐vertical (VV) polarisation signal is correlated better with volumetric soil moisture content compared to other incidence angles. The model parameters were further improved, and soil moisture estimation was refined by combining medium incidence angle (IS4) vertical‐horizontal polarisation response as another variable along with VV polarisation response. The effect of slope on the radar backscatter was minimized by incorporating local incidence angles derived from an ASTER DEM. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
2.
The influence of solar‐induced thermal stresses on the mechanical weathering of rocks in humid mid‐latitudes 下载免费PDF全文
下载免费PDF全文 Jennifer Aldred Martha Cary Eppes Kimberly Aquino Rebecca Deal Jacob Garbini Suraj Swami Alea Tuttle George Xanthos 《地球表面变化过程与地形》2016,41(5):603-614
The role of solar‐induced thermal stresses in the mechanical breakdown of rock in humid‐temperate climates has remained relatively unexplored. In contrast, numerous studies have demonstrated that cracks in rocks found in more arid mid‐latitude locations exhibit preferred northeast orientations that are interpreted to be a consequence of insolation‐related cracking. Here we hypothesize that similar insolation‐related mechanisms may be efficacious in humid temperate climates, possibly in conjunction with other mechanical weathering processes. To test this hypothesis, we collected rock and crack data from a total of 310 rocks at a forested field site in North Carolina (99 rocks, 266 cracks) and at forested and unforested field sites in Pennsylvania (211 rocks, 664 cracks) in the eastern United States. We find that overall, measured cracks exhibit statistically preferred strike orientations (47° ± 16), as well as dip angles (52° ± 24°), that are similar in most respects to comparable datasets from mid‐latitude deserts. There is less variance in strike orientations for larger cracks suggesting that cracks with certain orientations are preferentially propagated through time. We propose that diurnally repeating geometries of solar‐related stresses result in propagation of those cracks whose orientations are favorably oriented with respect to those stresses. We hypothesize that the result is an oriented rock heterogeneity that acts as a zone of weakness much like bedding or foliation that can, in turn, be exploited by other weathering processes. Observed crack orientations vary somewhat by location, consistent with this hypothesis given the different latitude and solar exposure of the field sites. Crack densities vary between field sites and are generally higher on north‐facing boulder‐faces and in forested sites, suggesting that moisture‐availability also plays a role in dictating cracking rates. These data provide evidence that solar‐induced thermal stresses facilitate mechanical weathering in environments where other processes are also likely at play. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
3.
Bearing capacity of rectangular footing on reinforced soil 总被引：2，自引：4，他引：2
In the present paper, a method of analysis for calculating the pressure intensity corresponding to a given settlement for
a rectangular footing resting on reinforced soil foundation has been presented. The process has been simplified by presenting
non-dimensional charts for the various terms used in the analysis, which can be directly used by practicing engineers. An
empirical method has been suggested to find out the ultimate bearing capacity of footing on reinforced soil. The results have
been validated with large-scale model tests also. The procedure has been made clear by giving an illustrative example.
This revised version was published online in July 2006 with corrections to the Cover Date. 相似文献
4.
Sanjay K. Srivastava Sameer Saran Rolf A. de By V. K. Dadhwal 《International journal of geographical information science》2014,28(3):427-454
Innumerable forest fire spread models exist for taking a decision, but far less focus is on the real causative factors which initiate/ignite fire in an area. It has been observed that the majority of the forest fires in India are initiated due to anthropogenic factors. In this study, we develop a geo-information system approach for management of forest fire in Mudumalai Wildlife Sanctuary, Tamil Nadu, India, with the objective to develop a forest fire likelihood model, integrating GIS and knowledge-based approach for predicting fire-sensitive initiation areas considering major causative and anti-causative factors. Amongst the various causative factors investigated, it was found that wildlife-dependent factor (antler collection and poaching) contributed significantly to fire occurrence followed by management-dependent factors (uncontrolled tourism and grazing), with much less influence of demographic factors. Similarly, anti-causative factor (stationing of anti-poaching/ fire camps) was considered as quite significant.
The likelihood model so developed, envisaging various factors and flammability, accounted for different scenarios as a result of pair-wise comparison on an ordinal scale in a knowledge matrix. The inferential statistics computed indicated the robustness of the model and its insensitivity to moderate changes. It makes it possible for this forest fire likelihood model to predict and prevent a forest fire in an effective and scientific manner because it can assume forest fire likelihood in real time and present in proper time. 相似文献
5.
Gosavi Meenal Swami Saran Satyendra Mittal 《Geotechnical and Geological Engineering》2009,27(4):571-583
In this paper, a pseudo-static analysis has been presented to investigate the stability of soil nailed vertical/nearly vertical
excavations. The failure surface is assumed as the arc of log-spiral passing through the toe of the excavation and intersecting
the ground at right angle. The horizontal and vertical seismic forces are taken in terms of horizontal and vertical seismic
coefficients. The internal failure mode of the nailed cut is considered either by pull-out or rupture or excessive bending
whichever is critical. Expression for the factor of safety is derived using moment equilibrium method. Results have been arranged
in tabular form considering ranges of the design parameters usually occur in practice. A typical table for the design of nailed
excavation with driven nails is presented in the paper. Analytical results have been compared with the findings of model tests
and reasonably good agreement has been observed. 相似文献
6.
S. Saran G. Sterk P. J. van Oevelen V. K. Dadhwal 《Journal of the Indian Society of Remote Sensing》2012,40(3):541-550
Soil moisture estimation is considered to be one of the important parameters in hydrological studies. The extraction of information on near surface soil moisture from the synthetic aperture radar is well established. The available Advanced Synthetic Aperture Radar (ASAR) data onboard ENVISAT with multi-incidence and multi-polarization mode for soil moisture estimation on sloping terrain was investigated. Empirical models were developed to estimate near surface soil moisture in the fallow agricultural fields by incorporating the effects of surface roughness using multi-incidence angle ASAR data. Medium incidence angle (IS-4) with VV polarization of ASAR data had higher correlation coefficient to volumetric soil moisture content. The ratio of medium (IS-4) to high incidence (IS-6) angle could further reduce the effect of surface roughness. The effect of topography on the radar data is taken care by calculating local incidence angle derived from ASTER DEM data. The VV polarization in the sloping terrain provided better results in comparison to VH polarization. 相似文献
7.
Abstract Biodiversity is the variety and variability of flora and fauna in an ecosystem. Articulated into genes, species, and ecosystem, it provides the biological plasticity needed by life on the earth to adapt changes. As we approach towards the forthcoming century, the earth's diversity of life is increasingly at risk through a combination of mostly human induced factors leading to erosion of genetic resources, extinction of species and collapse of ecological systems. Insitu conservation, biotechnology tools for conservation and prospecting, species habitat relationship and following evolutionary process of speciation are some of the challenges. India being one of the mega biodiversity centers of the world is also known for its traditional knowledge of conservation. The varied regions of the country, with unique floristic and faunal richness, their vastness, endemism, heterogeneity and also inaccessibility of large areas have necessitated creation of authentic baseline database on biodiversity. With the advent of Internet based Geographic Information System technology an effort is being made to harness the power of these technologies to facilitate biodiversity conservation. The information system organizes the data base generated under the project on “Biodiversity Characterization at landscape level using remote sensing and Geographic Information System in North East India” of the Department of Biotechnology and Department of Space, Government of India. The entire database is organized in object oriented relational database using Oracle as Backend and Visual Basic, ASP as front end. The web enabling part comes through uploading the entire spatial and non‐spatial data at a common platform using ArcSDE and ArcIMS The spatial characterization of landscape structures and its linkages with attribute information on the floristic composition, economic valuation, endemism are presented in Biodiversity Information System on a sharable environment. It is a step to evolve with new a mechanism to conserve biological diversity at local, regional and national level. 相似文献
8.
Sameer Saran Kapil Oberai Parag Wate Amol Konde Arnab Dutta Kavisha Kumar A. Senthil Kumar 《Journal of the Indian Society of Remote Sensing》2018,46(6):957-972
Virtual 3D city models are increasingly being used to model the realms of the real world for utilization in a number of applications related to environmental simulations including, urban planning, mapping the energy characteristics of buildings, noise mapping, flood modelling, etc. Apart from geometric and appearance/textural information, these applications have a requirement for complex urban semantics. Currently, a number of 3D standards are available in CAD, BIM and GIS related domains for the storage, visualization and transfer of 3D geospatial datasets. Initially, the 3D data models (such as COLLADA, VRML, X3D, etc.) were purely graphical/geometrical in nature and mainly used for visualization purposes. With the inclusion of thematic modules in OGC CityGML, the integration of geometry and semantics in a single data model paved the way for better sharing of virtual 3D city models. In spite of the availability of a wide range of 3D data standards, there are certain differences with respect to geometry, topology, semantics, LODs, etc., which complicates the integration of 3D geodata from heterogeneous sources. This paper serves to highlights the need for the innovative solutions with respect to the urban environmental related simulations primarily based on the use of virtual 3D city models. Four use cases are studied in this context namely, (1) urban solar potential estimation using CityGML models, (2) simulation of traffic noise level mapped on building walls from the urban road segments, (3) CityGML based 3D data models interoperability, and (4) 3D indoor logistics and subsurface utilities. However, for modelling majority of use cases, CityGML does not provide explicit thematic representations but provides support for extending the CityGML schema using Application Domain Extensions. In a nutshell, the study explores the semantic modelling capabilities of the CityGML for the transformation of native 3D virtual city models to one satisfying capabilities like semantic information and support towards interoperability. 相似文献
9.
In this study, the behaviour of shallow foundations subjected to eccentric inclined loads is presented using nonlinear elastic finite element analysis. The material non-linearity of the soil has been taken into consideration by employing the hyperbolic stress-strain model. The formulation of an isoparametric interface/joint element which is used between footing base and soil media has been presented. Tests have been conducted to determine the characteristics of soil-footing interface. Forty cases of strip footing resting on sand and subjected to eccentric-inclined load which were studied by Agrawal (1986) through model tests, have been analysed. The predicted pressure-settlement, pressure-horizontal displacement and pressure-tilt characteristics have been compared with experimental results of Agrawal (1986) and a reasonable agreement between the two has been observed. 相似文献
10.
This study reports results from evaluation of the quality of digital elevation model (DEM) from four sources viz. topographic map (1:50,000), Shuttle Radar Topographic Mission (SRTM) (90 m), optical stereo pair from ASTER (15 m) and CARTOSAT (2.5 m) and their use in derivation of hydrological response units (HRUs) in Sitla Rao watershed (North India). The HRUs were derived using water storage capacity and slope to produce surface runoff zones. The DEMs were evaluated on elevation accuracy and representation of morphometric features. The DEM derived from optical stereo pairs (ASTER and CARTOSAT) provided higher vertical accuracies than the SRTM and topographic map-based DEM. The SRTM with a coarse resolution of 90 m provided vertical accuracy but better morphometry compared to topographic map. The HRU maps derived from the fine resolution DEM (ASTER and CARTOSAT) were more detailed but did not provide much advantage for hydrological studies at the scale of Sitla Rao watershed (5800 ha). 相似文献