排序方式： 共有14条查询结果，搜索用时 546 毫秒
1.
2.
Sediment resuspension during and after mechanical excavation of macrophytes may have a significant impact on resident fish populations. Unfortunately, little is known about the influence of this sediment on the respiratory performance and feeding abilities of fishes in New Zealand waterways. We examined the effects of suspended sediment (SS) concentrations previously observed after a large-scale macrophyte removal operation on oxygen consumption (MO2) and feeding rates of brown trout (Salmo trutta). MO2 at 0 mg L?1, 150 mg L?1, 300 mg L?1, 450 mg L?1 and 600 mg L?1 of SS was measured using semi-closed respirometry. Feeding rates at the same SS concentrations were also measured using laboratory tank experiments. Results suggest that SS concentrations up to 600 mg L?1 have no effect on MO2. Conversely, feeding rates were significantly reduced at 450 mg L?1 (22% reduction) and 600 mg L?1 (31% reduction), indicating that sediment concentrations above 450 mg L?1 may negatively affect brown trout populations. 相似文献
3.
The complexity of the laws of dynamics governing 3-D atmospheric flows associated with incomplete and noisy observations make the recovery of atmospheric dynamics from satellite image sequences very difficult. In this paper, we address the challenging problem of estimating physical sound and time-consistent horizontal motion fields at various atmospheric depths for a whole image sequence. Based on a vertical decomposition of the atmosphere, we propose a dynamically consistent atmospheric motion estimator relying on a multilayer dynamic model. This estimator is based on a weak constraint variational data assimilation scheme and is applied on noisy and incomplete pressure difference observations derived from satellite images. The dynamic model is a simplified vorticity-divergence form of a multilayer shallow-water model. Average horizontal motion fields are estimated for each layer. The performance of the proposed technique is assessed using synthetic examples and using real world meteorological satellite image sequences. In particular, it is shown that the estimator enables exploiting fine spatio-temporal image structures and succeeds in characterizing motion at small spatial scales. 相似文献
4.
Sawayama Shuhei Nurdin Nurjannah Akbar AS Muhammad Sakamoto Shingo X. Komatsu Teruhisa 《Ocean Science Journal》2015,50(2):343-352
Coral reef ecosystems worldwide are now being harmed by various stresses accompanying the degradation of fish habitats and thus knowledge of fish-habitat relationships is urgently required. Because conventional research methods were not practical for this purpose due to the lack of a geospatial perspective, we attempted to develop a research method integrating visual fish observation with a seabed habitat map and to expand knowledge to a two-dimensional scale. WorldView-2 satellite imagery of Spermonde Archipelago, Indonesia obtained in September 2012 was analyzed and classified into four typical substrates: live coral, dead coral, seagrass and sand. Overall classification accuracy of this map was 81.3% and considered precise enough for subsequent analyses. Three sub-areas (CC: continuous coral reef, BC: boundary of coral reef and FC: few live coral zone) around reef slopes were extracted from the map. Visual transect surveys for several fish species were conducted within each sub-area in June 2013. As a result, Mean density (Ind. / 300 m2) of Chaetodon octofasciatus, known as an obligate feeder of corals, was significantly higher at BC than at the others (p < 0.05), implying that this species’ density is strongly influenced by spatial configuration of its habitat, like the “edge effect.” This indicates that future conservation procedures for coral reef fishes should consider not only coral cover but also its spatial configuration. The present study also indicates that the introduction of a geospatial perspective derived from remote sensing has great potential to progress conventional ecological studies on coral reef fishes.
相似文献5.
Understanding the flow field around horizontal axis marine current turbines is important if this new energy generation technology is to advance. The aim of this work is to identify and provide an understanding of the principal parameters that govern the downstream wake structure and its recovery to the free-stream velocity profile. This will allow large farms or arrays of devices to be installed whilst maximising device and array efficiency. Wake characteristics of small-scale mesh disk rotor simulators have been measured in a 21 m tilting flume at the University of Southampton. The results indicate that wake velocities are reduced in the near wake region (close behind the rotor disk) for increasing levels of disk thrust. Further downstream all normalised wake velocity values converge, enforcing that, as for wind turbines, far wake recovery is a function of the ambient flow turbulence. Varying the disk proximity to the water surface/bed introduces differential mass flow rates above and below the rotor disk that can cause the wake to persist much further downstream. Finally, the introduction of increased sea bed roughness whilst increasing the depth-averaged ambient turbulence actually decreases downstream wake velocities. Results presented demonstrate that there are a number of interdependent variables that affect the rate of wake recovery and will have a significant impact on the spacing of marine current turbines within an array. 相似文献
6.
Chronological and palaeoenvironmental context of human occupations at the Buendía rockshelter (Central Spain) during the late Upper Pleistocene in inland Iberia 
下载免费PDF全文
下载免费PDF全文 7.
8.
Experimentally validated numerical method for the hydrodynamic design of horizontal axis tidal turbines 总被引：1，自引：0，他引：1
W.M.J. Batten A.S. Bahaj A.F. Molland J.R. Chaplin Sustainable Energy Research Group 《Ocean Engineering》2007,34(7):1013-1020
Although a lot can be learnt from technology transfer from wind turbines and ship propellers, there have been a few experiments investigating marine current turbines. As a result, a study has been carried out on the power, thrust and cavitation characteristics of 1/20th scale model of a possible 16 m diameter horizontal axis tidal turbine. Cavitation tunnel experiments for different blade pitch settings have been compared with simulations based on a developed blade element-momentum theory. This theory has been shown to provide a satisfactory representation of the experimental turbine performance characteristics. As an example application, the developed theory has been used to design possible horizontal axis tidal turbines for the tidal flows around Portland Bill. The results show that there is a clear balance between design loads and optimisation of energy yields. 相似文献
9.
The quantification and prediction of damage due to different seismic actions to structure types of different strength is an important problem not yet solved in the Earthquake Engineering field. In addition, owing to the fact that macroseismic information cannot be used directly in dynamic calculations, a new problem appears when these are the only kind of data available. Thus, there is a need to estimate a parameter to relate the energy of the ground motion and the damage occurrence, and eventually achieve a better seismic risk assessment. After the study and review of some representative potential damage parameters, attention has been paid to the Arias intensity (unfiltered and filtered in certain frequency ranges) and the Cumulative Absolute velocity (CAV) as the parameters to evaluate the energy of movement, and to relate them with the observed damage. The data used to infer these correlations have been provided by the ENEA-ENEL (Italy). The information consists of strong motion records from the Campano Lucano (1980), Umbria (1984) and Lazio-Abruzzo (1984) earthquakes, and data of damage to buildings in the vicinity of recording instruments (within a maximum radius of 300 m, where the soil conditions remain constant). In this paper, some relations have been obtained to quantify the damage level for different seismic inputs. The results suggest that unfiltered Arias intensity and CAV (for calculation threshold 20 cm/s2) correlate well with the macroseismic information used. Best fits are obtained between the quoted parameters and the observed damage in type A structures. © 1997 by John Wiley & Sons, Ltd. 相似文献
10.
The generalised Pareto distribution (GPD) is often used to model the distribution of storm peak wave heights exceeding a high threshold, from which return values can be calculated. There are large differences in the performance of various parameter and quantile estimators for the GPD. Commonly used estimation methods such as maximum likelihood or probability weighted moments are not optimal, especially for smaller sample sizes. The performance of several estimators for the GPD is compared by the Monte Carlo simulation and the implications for estimating return values of significant wave height are discussed. Of the estimators compared, the likelihood-moment (LM) estimator has close to the lowest bias and variance over a wide range of sample sizes and GPD shape parameters. The LM estimator always exists, is simple to compute and has a low sensitivity to choice of threshold. It is recommended that the LM estimator is used for calculating return values of significant wave height when the sample size is less than 500. For sample sizes above 500 the NEW estimator of Zhang and Stephens (2009) can give accurate results for low computational cost. 相似文献