The Formation and Circulation of the Intermediate Water in the Japan Sea   总被引：1，自引：0，他引：1  

Jong-Hwan Yoon  Hideyuki Kawamura 《Journal of Oceanography》2002,58(1):197-211

In order to clarify the formation and circulation of the Japan/East Sea Intermediate Water (JESIW) and the Upper portion of the Japan Sea Proper Water (UJSPW), numerical experiments have been carried out using a 3-D ocean circulation model. The UJSPW is formed in the region southeast off Vladivostok between 41°N and 42°N west of 136°E. Taking the coastal orography near Vladivostok into account, the formation of the UJSPW results from the deep water convection in winter which is generated by the orchestration of fresh water supplied from the Amur River and saline water from the Tsushima Warm Current under very cold conditions. The UJSPW formed is advected by the current at depth near the bottom of the convection and penetrates into the layer below the JESIW. The origin of the JESIW is the low salinity coastal water along the Russian coast originated by the fresh water from the Amur River. The coastal low salinity water is advected by the current system in the northwestern Japan Sea and penetrates into the subsurface below the Tsushima Warm Current region forming a subsurface salinity minimum layer. This revised version was published online in August 2006 with corrections to the Cover Date.  相似文献   

Recovery of thermohaline circulation under CO₂ stabilization and overshoot scenarios   总被引：1，自引：0，他引：1  

Norikazu. Nakashiki  Dong-Hoon Kim  Frank O. Bryan  Yoshikatsu Yoshida  Daisuke Tsumune  Koki Maruyama  Hideyuki Kitabata 《Ocean Modelling》2006,15(3-4):200

In this study we examine the behavior of the thermohaline circulation, as simulated by the Community Climate System Model version 3 (CCSM3), for several centuries following CO₂ stabilization for the SRES B1 and A1B scenarios and for an “overshoot” scenario in which CO₂ levels temporarily reach the same level as in the A1B scenario before declining to an ultimate stabilization level that is identical to the B1 case. While we find no evidence for irreversible changes of the thermohaline circulation in the overshoot experiment, the interplay of the different timescales of the temperature response of the surface and interior ocean does lead to a number of differences in the long-term response of the ocean between it and the B1 stabilization scenario where the same GHG levels are approached by different paths. The stronger initial warming and its slow penetration into the deeper ocean, followed by a transient surface cooling in the overshoot scenario leads to lower static stability, deeper mixing, and a more rapid recovery of the thermohaline circulation than in the B1 stabilization scenario. While the overshoot scenario recovers surface conditions (e.g. SST, sea ice extent) very similar to the B1 scenario shortly after reaching the same GHG levels, the additional accumulation of heat in the interior ocean during the period of higher forcing causes the global mean ocean temperature and steric sea level to remain higher than in the B1 stabilization scenario for at least another several centuries.  相似文献   

Ce and Nd isotope geochemistry on island arc volcanic rocks with negative Ce anomaly: existence of sources with concave REE patterns in the mantle beneath the Solomon and Bonin island arcs   总被引：5，自引：0，他引：5  

Hiroshi Shimizu  Hideyuki Sawatari  Yousuke Kawata  Peter N. Dunkley  Akimasa Masuda 《Contributions to Mineralogy and Petrology》1992,110(2-3):242-252

¹³⁸Ce/¹⁴²Ce isotope ratios in Cenozoic island arc volcanic rocks are reported for the first time, together with isotope ratios of Nd and Sr and abundances of REE, Ba and Sr. The island arc volcanics studies here are boninites from Chichijima, the Bonin Islands, and basalts and andesites from the Solomon Islands. REE patterns of the island arc volcanic rocks from the Solmon Islands and the Bonin Islands are confirmed to have negative Ce anomalies. It is also disclosed that the majority of these island arc volcanic rocks show mainly positive values for both _Ce and _Nd. It is shown that these _Ce and _Ce values can hardly be interpreted by simple mixing between MORB and oceanic or continental crustal rocks; the former have positive _Nd and negative _Ce and the latter have negative _Ce and positive or negative _Nd. Existence of sources having positive _Ce and _Nd values is strongly suggested. If the sources are assumed to have been fractionated from CHUR (chondritic uniform reservoir) at the early or middle Precambrian era, the sources from which the volcanics were derived are concluded to have kept concave REE patterns with larger (La/Ce)_N and smaller (Nd/Sm)_N ratios than chondritic values over a substantial period of time, until the time of Cenozoic magmatism forming island arc volcanic rocks in question. During the periods of the Cenozoic magmatic activities and their related events, Ce anomalies are considered to have been created. From Ce and Nd isotope ratios, however, it is difficult to determine which of the following processes was responsible for the Ce anomaly; the incorporation process of subducted oceanic crust into magma at the mantle or the slab dehydration and metasomatism process. Nevertheless, so far as Ce and Nd isotopic ratios are concerned, incorporation of oceanic sediments did not take place to any clearly detectable degree.  相似文献   

Preparation of a New Geological Survey of Japan Geochemical Reference Material: Coral JCp-1   总被引：2，自引：0，他引：2  

Takashi Okai  Atsushi Suzuki  Hodaka Kawahata  Shigeru Terashima  Noboru Imai 《Geostandards and Geoanalytical Research》2002,26(1):95-99

A new geochemical reference material, coral Porites sp. JCp-1 has been prepared by the Geological Survey of Japan (GSJ). Provisional values for twenty one major, minor and trace elements are presented. The homogeneity tests showed that all elements studied are considered to be homogeneously distributed.  相似文献   

Occurrence of Halogen-rich Phlogopite in Late Cenozoic Volcanic Rocks in the Japanese Arcs     

Akira Imai 《Resource Geology》2004,54(2):153-166

Abstract. Halogen-rich phlogopite occurs in the groundmass of andesite and dacite lavas from Late Tertiary to Quaternary volcanoes associated with native sulfur and limonite deposits (Shiretoko-Iwozan, Hachimantai, Adatara, Omeshidake, Masaki) and hydrothermal ore deposits (Harukayama, Muineyama, Hishikari) in Japan. The F contents of the halogen-rich phlogopite range from 3.6 to 5.7 wt%, corresponding to atomic F/(F+C1+OH) ratios ranging from 0.45 to 0.69. On the other hand, the Cl contents of the halogen-rich phlogopite are around 0.2 wt%. The atomic Mg/(Mg+Fe) ratios range from 0.69 to 0.83.
The fluorine intercept value [IV(F)] defined by Munoz (1984) of the phlogopites ranges from 0.79 to 3.17, and the chlorine intercept value [IV(Cl)] ranges from -7.11 to -7.77. The observed IV(F) of the phlogopites broadly overlap the range of the IV(F) for biotites from porphyry copper deposits. On the other hand, the observed IV(Cl) are significantly lower than the IV(Cl) for biotites from porphyry copper deposits. Whereas the F contents of the phlogopite appear more prominent compared to the Cl contents, the calculation of halogen intercept values revealed that the phlogopites are enriched in Cl with respect to the element distribution effect of Mg-Fe substitution. Since the degree of Cl enrichment of the phlogopite is more significant compared to that of biotite in porphyry copper deposits, the phlogopites are considered to have formed under the condition of significantly high activity of halogens. Hydrothermal ore deposits may be formed in magmatic hydrothermal system associated with volcanoes where halogen-rich phlogopite is formed by hypersaline fluid.  相似文献   

Primary Ore Mineral Assemblage and Fluid Inclusion Study of the Batu Hijau Porphyry Cu-Au Deposit, Sumbawa, Indonesia   总被引：3，自引：0，他引：3  

Akira Imai  Satoshi Ohno 《Resource Geology》2005,55(3):239-248

Abstract. The Batu Hijau porphyry Cu‐Au deposit, Sumbawa Island, Indonesia, is associated with a tonalitic intrusive complex. The temperature‐pressure condition of mineralization at the Batu Hijau deposit is discussed on the basis of fluid inclusion microthermometry. Then, the initial Cu‐Fe sulfide mineral assemblage is discussed. Bornite and chalcopyrite are major copper ore minerals associated with quartz veinlets. The quartz veinlets have been classified into ‘A’ veinlets associated with bornite, digenite, chalcocite and chalcopyrite, ‘B’ veinlets having chalcopyrite bornite along vuggy center‐line, rare ‘C’ chalcopyrite‐quartz veinlets, and late ‘D’ veinlets consisting of massive pyrite and quartz (Clode et al., 1999). Copper and gold mineralization is associated with abundant ‘A’ quartz veinlets. Abundant fluid inclusions are found in veinlet quartz consisting mainly of gas‐rich inclusions and polyphase inclusions throughout the veinlet types. The hydrothermal activity occurred in temperature‐pressure conditions of aqueous fluid immiscibility into hypersaline brine and dilute vapor. The halite dissolution (Tm[halite]) and liquid‐vapor homogenization (Th) temperatures of the polyphase inclusions in veinlet quartz range from 270 to 472d?C and from 280 to 454d?C, respectively. The estimated salinity ranges from 36 to 47 wt% (NaCl equiv.). The apparent pressures lower than 300 bars are estimated to have been along the liquid‐vapor‐halite curve for the fluid inclusions having the Th lower than the Tm that trapped the brine saturated with halite, or at slightly higher pressure relative to liquid‐vapor‐halite curve for the fluid inclusions having the Th higher than the Tm that trapped the brine unsaturated with halite. The actual temperature and pressure during the hydrothermal activity at the Batu Hijau deposit are estimated to have been around 300d?C and 50 bars. At such temperature‐pressure conditions, the principal and initial Cu‐Fe sulfide mineral assemblages are thought to be chalcopyrite + bornite solid solution (bnss) for the chalcopyrite‐bearing assemblage, and chalcocite‐digenite solid solution and bnss for the chalcopyrite‐free assemblage.  相似文献   

Evolution of Hydrothermal System at the Dizon Porphyry Cu-Au Deposit, Zambales, Philippines     

Akira Imai 《Resource Geology》2005,55(2):73-90

Abstract. Evolution of hydrothermal system from initial porphyry Cu mineralization to overlapping epithermal system at the Dizon porphyry Cu‐Au deposit in western central Luzon, Zambales, Philippines, is documented in terms of mineral paragen‐esis, fluid inclusion petrography and microthermometry, and sulfur isotope systematics. The paragenetic stages throughout the deposit are summarized as follows; 1) stockwork amethystic quartz veinlets associated with chalcopyrite, bornite, magnetite and Au enveloped by chlorite alteration overprinting biotite alteration, 2) stockwork quartz veinlets with chalcopyrite and pyrite associated with Au and chalcopyrite and pyrite stringers in sericite alteration, 3) stringer quartz veinlets associated with molybdenite in sericite alteration, and 4) WNW‐trending quartz veins associated with sphalerite and galena at deeper part, while enargite and stibnite at shallower levels associated with advanced argillic alteration. Chalcopyrite and bornite associated with magnetite in quartz veinlet stockwork (stage 1) have precipitated initially as intermediate solid solution (iss) and bornite solid solution (bnss), respectively. Fluid inclusions in the stockwork veinlet quartz consist of gas‐rich inclusions and polyphase inclusions. Halite in polyphase inclusions dissolves at temperatures ranging from 360d?C to >500d?C but liquid (brine) and gas (vapor) do not homogenize at <500d?C. The maximum pressure and minimum temperature during the deposition of iss and bnss with stockwork quartz veinlets are estimated to be 460 bars and 500d?C. Fluid inclusions in veinlet stockwork quartz enveloped in sericite alteration (stage 2) consist mainly of gas‐rich inclusions and polyphase inclusions. In addition to the possible presence of saturated NaCl crystals at the time of entrapment of fluid inclusions that exhibit the liquid‐vapor homogenization temperatures lower than the halite dissolution temperatures in some samples, wide range of temperatures of halite dissolution and liquid‐vapor homogenization of polyphase inclusions from 230d?C to >500d?C and from 270d?C to >500d?C, respectively, suggests heterogeneous entrapment of gaseous vapor and hypersaline brine. The minimum pressure and temperature are estimated to be about 25 bars and 245d?C. Fluid inclusions in veinlet quartz associated with molybdenite (stage 3) are dominated by gas‐rich inclusions accompanied with minor liquid‐rich inclusions that homogenize at temperatures between 350d?C and 490d?C. Fluid inclusions in vuggy veinlet quartz associated with stibnite (stage 4) consist mainly of gas‐rich inclusions with subordinate polyphase inclusions that do not homogenize below 500d?C. Fluid inclusions in veinlet quartz associated with galena and sphalerite (stage 4) are composed of liquid‐rich two‐phase inclusions, and they homogenize into liquid phase at temperatures ranging widely from 190d?C to 300d?C (suggesting boiling) and the salinity ranges from 1.0 wt% to 3.4 wt% NaCl equivalent. A pressure of about 15 bars is estimated for the dilute aqueous solution of 190d?C from which veinlet quartz associated with galena and sphalerite precipitated. In addition to a change in temperature‐pressure regime from lithostatic pressure during the deposition of iss and bnss with stockwork quartz veinlets to hydrostatic pressure during fracture‐controlled quartz veinlet associated with galena and sphalerite, a decrease in pressure is supposed to have occurred due to unroofing or removal of the overlying piles during the temperature decrease in the evolution of hydrothermal system. The majority of the sulfur isotopic composition of sulfides ranges from ±0 % to +5 %. Sulfur originated from an iso‐topically uniform and homogeneous source, and the mineralization occurred in a single hydrothermal system.  相似文献   

High-reliability zircon separation for hunting the oldest material on Earth: An automatic zircon separator with image-processing/microtweezers-manipulating system and double-step dating     

Yukio Isozaki  Shinji Yamamoto  Shuhei Sakata  Hideyuki Obayashi  Takafumi Hirata  Ken-ichi Obori  Toshinori Maebayashi  Satoshi Takeshima  Toshikazu Ebisuzaki  Shigenori Maruyama 《地学前缘(英文版)》2018,9(4):1073-1083

Despite the recent development in radiometric dating of numerous zircons by LA-ICPMS, mineral separation still remains a major obstacle, particularly in the search for the oldest material on Earth. To improve the efficiency in zircon separation by an order of magnitude, we have designed/developed a new machine-an automatic zircon separator(AZS). This is designed particularly for automatic pick-up of100 μm-sized zircon grains out of a heavy mineral fraction after conventional separation procedures. The AZS operates in three modes:(1) image processing to choose targeted individual zircon grains out of all heavy minerals spread on a tray,(2) automatic capturing of the individual zircon grains with microtweezers, and(3) placing them one-by-one in a coordinated alignment on a receiving tray. The automatic capturing was designed/created for continuous mineral selecting without human presence for many hours. This software also enables the registration of each separated zircon grain for dating, by recording digital photo-image, optical(color) indices, and coordinates on a receiving tray. We developed two new approaches for the dating; i.e.(1) direct dating of zircons selected by LA-ICPMS without conventional resin-mounting/polishing,(2) high speed U-Pb dating, combined with conventional sample preparation procedures using the new equipment with multiple-ion counting detectors(LA-MIC-ICPMS).With the first approach, Pb-Pb ages obtained from the surface of a mineral were crosschecked with the interior of the same grain after resin-mounting/polishing. With the second approach, the amount of time required for dating one zircon grain is ca. 20 s, and a sample throughput of 150 grains per hour can be achieved with sufficient precision(ca. 0.5%).We tested the practical efficiency of the AZS, by analyzing an Archean Jack Hills conglomerate in Western Australia with the known oldest(4.3 Ga) zircon on Earth. Preliminary results are positive; we were able to obtain more than 194 zircons that are over 4.0 Ga out of ca. 3800 checked grains, and 9 grains were over 4300 Ma with the oldest at 4371 ± 7 Ma. This separation system by AZS, combined with the new approaches, guarantees much higher yield in the hunt for old zircons.  相似文献   

On the age difference between the oldest Population I and the extreme Population II stars     

Hideyuki Saio  Yukio Shibata  Mahiro Simoda 《Astrophysics and Space Science》1977,47(1):151-162

The age difference between the oldest Population I stars and the extreme Population II stars is investigated by comparison of observational H-R diagrams with theoretical results using the common input physics and computer program for both Populations. Chemical compositions adopted for Population I and II stars are,X=0.7 andZ=0.02, andX=2×10^–4, respectively. Evidence collected indicates that the open cluster NGC 188 and the globular cluster M92 are the representative samples of the oldest Population I and extreme Population II stars, respectively. Comparison between the observed H-R diagrams and theoretical isochrones in terms of the luminosity of the subgiant region and the turnoff point for NGC 188 and M92, respectively, then suggests that there is a significant age difference between Population I and II objects. The uncertainty of the oxygen abundance in the extreme Population II stars and its effect on their age determination is briefly discussed.  相似文献   

About the Special Issue: Collection of Achievements on Earth Resources from AUN/SEED-Net, Part II     

Akira Imai    Carla B. Dimalanta  Agung Harijoko 《Resource Geology》2007,57(2):99-101

  相似文献