排序方式： 共有16条查询结果，搜索用时 15 毫秒
1.
一维综合孔径微波辐射计能够有效提高观测的空间分辨率，其观测入射角通常在0°~55°范围内变化。为了开发适用于一维综合孔径微波辐射计的海面温度反演算法，需要评估其观测亮温对海洋大气环境要素的敏感性。利用海面发射率模型和大气辐射传输模型，构建了适用于一维综合孔径微波辐射计的微波海洋大气辐射传输模式，研究了C波段垂直和水平极化微波辐射亮温在不同入射角下对海洋大气环境要素的敏感性变化情况，并定量计算了相应的敏感系数。结果表明:垂直和水平极化亮温对海洋大气环境要素的敏感性表现出不同的特性。随着入射角的增大，垂直极化亮温对海面温度的敏感性增强，对海面风场的敏感性相对减弱；水平极化亮温则相反。由大气水汽含量和云液态水含量误差引入的垂直和水平极化亮温误差随入射角增大而增大，但是，即使在55°的大入射角下垂直和水平极化亮温误差仍小于0.12 K。对于海面温度反演精度优于1 K的要求，一维综合孔径微波辐射计的测温精度需优于0.6 K。研究结果对于一维综合孔径微波辐射计海面温度反演算法的研究和载荷设计具有一定的理论指导意义。 相似文献
2.
基于一维综合孔径微波辐射计的海面温度反演研究 总被引：1，自引：0，他引：1
Due to the low spatial resolution of sea surface temperature(T_S) retrieval by real aperture microwave radiometers,in this study, an iterative retrieval method that minimizes the differences between brightness temperature(T_B)measured and modeled was used to retrieve sea surface temperature with a one-dimensional synthetic aperture microwave radiometer, temporarily named 1 D-SAMR. Regarding the configuration of the radiometer, an angular resolution of 0.43° was reached by theoretical calculation. Experiments on sea surface temperature retrieval were carried out with ideal parameters; the results show that the main factors affecting the retrieval accuracy of sea surface temperature are the accuracy of radiometer calibration and the precision of auxiliary geophysical parameters. In the case of no auxiliary parameter errors, the greatest error in retrieved sea surface temperature is obtained at low T_S scene(i.e., 0.710 6 K for the incidence angle of 35° under the radiometer calibration accuracy of0.5 K). While errors on auxiliary parameters are assumed to follow a Gaussian distribution, the greatest error on retrieved sea surface temperature was 1.330 5 K at an incidence angle of 65° in poorly known sea surface wind speed(W)(the error on W of 1.0 m/s) over high W scene, for the radiometer calibration accuracy of 0.5 K. 相似文献
3.
Planetary boundary layer height (PBLH) is an important input parameter for any boundary layer study or model, either climate or atmospheric. The variation of the PBLH is also of great significance to the physical processes of numerical prediction, diagnosis of weather forecasting and monitoring urban pollutants. However, effective ways to monitor the PBLH continuously are lack. Wind profilers are commonly used in monitoring PBLH continuously because of its high temporal and spatial resolution, coupled with capability of continuous detection. In this paper, the covariance wavelet transform (CWT) is used to analyze the range-corrected signal-to-noise ratio (SNR) of the wind profiler to determine the PBLH, which is then compared with the results measured by the gradient method and the radiosonde. The conclusions are as follows: (1) The scaling parameter a and translation parameter b of the wavelet are critical in determination of the PBLH by applying the CWT as different values may get completely different results, which requires to select appropriate values in the calculation carefully. (2) Quality control is crucial in determining the PBLH because good quality control can help remove mutation points, which makes the determined PBLH more consistent with the actual situation. (3) In clear-air, the gradient method is not applicable if the boundary layer turbulence is inhomogeneous and the impact of noise is large for that it is easy to be impacted by the mutation of SNR caused by the atmosphere turbulence instability and other factors, which will cause large errors, while the CWT method as an improvement of the gradient method can determine the PBLH quite well. (4) Through quality control, the PBLHs determined by the CWT are consistent with those of radiosonde, and the correlation coefficient between them is 0.87. 相似文献
4.
针对机载合成孔径雷达(SAR)对海探测特点,采用多入射角法从SAR数据本身得到与海浪参数反演区域时空匹配的同步海面风速和风向,并结合线性变换关系,计算得到海浪初猜谱对应的仿真SAR图像谱,将仿真SAR图像谱和观测SAR图像谱输入代价函数中进行迭代运算,通过非线性方程的解算得到最适海浪谱;采用交叉谱法去除海浪传播180°方向模糊,最终得到海浪参数。论文提出的基于同步风场的机载SAR海浪参数反演方法,充分利用了机载SAR海洋环境探测的优势,解决了传统SAR海浪参数反演中初猜谱构造依赖外部风场的问题,机载同步飞行试验的海浪参数反演结果与浮标观测值的有效波高、波向的均方根误差分别为0.23 m和13.23°,验证了该方法的有效性,可为机载SAR海浪参数反演业务化提供支持。 相似文献
5.
One-dimensional synthetic aperture microwave radiometers have higher spatial resolution and record measurements at multiple incidence angles. In this paper, we propose a multiple linear regression method to retrieve sea surface wind speed at an incidence angle between 0° ~65°. We assume that a one-dimensional synthetic aperture microwave radiometer operates at frequencies of 6.9, 10.65, 18.7, 23.8 and 36.5 GHz. Then, the microwave radiative transfer forward model is used to simulate the measured brightness temperatures. The sensitivity of the brightness temperatures at 0°~65° to the sea surface wind speed is calculated. Then, vertical polarization channels(VR), horizontal polarization channels(HR) and all channels(AR) are used to retrieve the sea surface wind speed via a multiple linear regression algorithm at 0° ~65°, and the relationship between the retrieval error and incidence angle is obtained. The results are as follows:(1) The sensitivity of the vertical polarization brightness temperature to the sea surface wind speed is smaller than that of the horizontal polarization.(2) The retrieval error increases with Gaussian noise. The retrieval error of VR first increases and then decreases with increasing incidence angle, the retrieval error of HR gradually decreases with increasing incidence angle, and the retrieval error of AR first decreases and then increases with increasing incidence angle.(3) The retrieval error of AR is the lowest and it is necessary to retrieve the sea surface wind speed at a larger incidence angle for AR. 相似文献
6.
大气边界层的高度是污染物扩散模式、气候模式、大气模式的一个重要输入参数,边界层高度的变化对数值预报中的物理过程,天气预报的诊断分析,城市污染物的监控也有相当重要的作用。然而,边界层高度的连续监测缺乏有力的手段,风廓线雷达凭借其高时间分辨率和空间分辨率,加上其能够连续探测等优点,可以成为连续监测边界层高度的有效工具。利用协方差小波变换对风廓线雷达距离订正后信噪比数据进行分析,来确定边界层的高度,并与无线探空仪确定的边界层高度进行比较,通过分析得到：(1) 协方差小波变换应用于边界层高度的确定时,尺度因子a和平移因子b的选取很关键,不同的a和b值得到的结果可能差异很大,在计算过程中要仔细选择合适的值;(2) 质量控制对正确判断边界层高度至关重要,好的质量控制方法可以起到剔除突变点的作用,使确定的边界层高度更符合实际情况;(3) 在晴空条件下,如果边界层湍流不均匀及杂波影响较大时,梯度法将不适用,它容易受到大气湍流不稳定以及其他因素引起的信噪比突变而产生较大误差,而协方差小波变换法作为梯度法的改进,能够较好地确定边界层的高度;(4) 通过质量控制,小波变换法和探空仪确定的高度很一致,两者的相关系数达到0.87。 相似文献
7.
在合成孔径雷达(Synthetic Aperture Radar,SAR)海面风场反演中,基于风条纹影像纹理特征的海面风向反演方法精度高,但是依赖于图像风条纹的存在,而外部风向信息与SAR资料时空分辨率不易匹配、精度较低,从而影响大面积、高分辨率海面风场反演的精度。针对此问题,提出一种将SAR图像风条纹线性纹理特征与外部风向信息相结合的星载SAR海面风向获取方法,在SAR影像线性纹理特征明显的区域采用二维连续小波变换得到高精度的海面风向,其余区域采用与之时空相匹配的数值预报模式风向填充;并利用地球物理模型函数进一步得到海面风速,进而实现高精度、大范围海面风场的反演。为验证本文方法的有效性,利用ENVISAT/ASAR数据进行风场反演试验,并将反演结果与浮标实测数据进行比对。结果表明:在线性纹理特征明显的区域,小波方法的反演精度优于快速傅里叶变换(FFT)法和数值预报模式风向;外部风向精度略低,但与SAR观测资料时空匹配性较好,弥补了风条纹风向的不足。二者的结合为星载SAR海面风场反演的业务化应用提供了支持。 相似文献
8.
大气折射率结构常数描述了大气湍流起伏的强弱,它表征了大气折射率随机不均匀性的剧烈程度。光波和无线电波在大气中传播时会受到大气湍流的影响而产生各种不良效应,如:光斑漂移、闪烁、相位起伏等。因此,对大气折射率结构常数的研究具有重要的意义。本文利用常规探空资料对微波波段大气折射率结构常数进行了仿真研究,结果表明:在低空,特别是大气边界层之内,大气折射率结构常数主要为湿度所贡献;在高空,大气折射率结构常数主要为温度所贡献。在微波波段,影响大气折射率结构常数最大的气象因子并不是温湿压的大小,而是它们梯度的大小,其中湿度梯度的大小对其影响最大,在实际的低空测量大气折射率结构常数时,主要考虑湿度梯度与温度梯度的影响。 相似文献
9.
根据L/C双频共面SAR能够获取同一海域双波段电磁波后向散射系数,得到更多海洋目标特征信息的电磁散射特点,结合地球物理模型函数研究了一种新的SAR海面风场反演方法。利用L/C双频共面SAR的L和C两个波段的地球物理模型函数和后向散射系数等信息,通过地球物理模型函数联立以及构建和求解最小代价函数,直接从SAR数据本身获取海面风场信息,并借助辅助数据去除了风向的180°模糊,从而实现海面风场反演。仿真分析和海上机载同步飞行试验的研究结果表明,该方法可直接利用SAR数据本身获取精度较高的海面风速、风向;绝对辐射定标精度是决定海面风场反演精度的关键因素,海面风场反演误差随定标精度提高而减小;随着海面风速的增大,风速反演误差逐渐增大。论文提出的双频共面SAR海面风场反演方法解决了传统单波段单极化SAR海面风场反演存在的固有问题,机载同步飞行试验的海面风速和风向反演结果与调查船观测值的均方根误差分别为0.93 m/s和19.39°,可为星载SAR海面风场反演业务化和载荷研制提供支持。 相似文献
10.
采用FFT算法和PPP算法,对南京S波段双线偏振全相参脉冲多普勒天气雷达一次实测回波时域I/Q信号进行谱宽估计,并对谱宽估计值及其偏差与信噪比的关系进行了分析。结果发现:1)相对高信噪比数据,低信噪比回波的谱宽估计偏差更大,且随信噪比降低偏差呈指数增长。相对FFT算法,PPP算法的谱宽估计偏差更大,且随信噪比降低偏差增长速度更快。2)为提高谱宽估计精度必须要尽量消除噪声(主要是低信噪比回波信号)造成的影响,分别对FFT算法和PPP算法提出了改进方案,两种算法的谱宽估计质量都有了较大提升,尤其是低信噪比回波数据。修正后FFT算法处理得到的谱宽数据与RVP8偏差更小,而修正后PPP算法处理得到的谱宽数据偏差较大且比较离散,这表明FFT算法的估计精度更高,但实际处理过程中PPP算法的处理速度更快,两种谱矩估计算法各有优劣。 相似文献