Distinctive Features of Two Genetic Types of Sulfide Ores in the Central Atlantic     

Gablina  I. F. 《Lithology and Mineral Resources》2022,57(2):143-160

Lithology and Mineral Resources - The results of long-term studies of the localization conditions, morphology, structure, mineral and chemical compositions of modern ocean sulfide ores, carbonate...  相似文献   

Evaluation of Interactions Between Oilfield Chemicals and Reservoir Rocks     

Wuyep  E. O.  Oluyemi  G. F.  Yates  K.  Akisanya  A. R. 《Natural Resources Research》2020,29(2):1239-1258

Natural Resources Research - Sand failure and production occurs when the formation stress exceeds the strength of the formation, which is derived majorly from the natural material that cements the...  相似文献   

Structure-specific selection of earthquake ground motions for the reliable design and assessment of structures   总被引：1，自引：1，他引：0  

E. I. Katsanos  A. G. Sextos 《Bulletin of Earthquake Engineering》2018,16(2):583-611

A decision support process is presented to accommodate selecting and scaling of earthquake motions as required for the time domain analysis of structures. Code-compatible suites of seismic motions are provided being, at the same time, prequalified through a multi-criterion approach to induce response parameters with reduced variability. The latter is imperative to increase the reliability of the average response values, normally required for the code-prescribed design verification of structures. Structural attributes like the dynamic characteristics as well as criteria related to variability of seismic motions and their compliance with a target spectrum are quantified through a newly introduced index, δ _sv–sc , which aims to prioritize motions suites for response history analysis. To demonstrate the applicability of the procedure presented, the structural model of a multi-story building was subjected to numerous suites of motions that were highly ranked according to both the proposed approach (δ _sv–sc ) and the conventional one (δ _conv ), that is commonly used for earthquake records selection and scaling. The findings from numerous linear response history analyses reveal the superiority of the proposed multi-criterion approach, as it extensively reduces the intra-suite structural response variability and consequently, increases the reliability of the design values. The relation between the target reliability in assessing structural response and the size of the suite of motions selected was also investigated, further demonstrating the efficiency of the proposed selection procedure to achieve higher response reliability levels with smaller samples of ground motion.  相似文献   

The 2014 Earthquake Model of the Middle East: seismogenic sources     

Laurentiu Danciu  Karin Şeşetyan  Mine Demircioglu  Levent Gülen  Mehdi Zare  Roberto Basili  Ata Elias  Shota Adamia  Nino Tsereteli  Hilal Yalçın  Murat Utkucu  Muhammad Asif Khan  Mohammad Sayab  Khaled Hessami  Andrea N. Rovida  Massimiliano Stucchi  Jean-Pierre Burg  Arkady Karakhanian  Hektor Babayan  Mher Avanesyan  Tahir Mammadli  Mahmood Al-Qaryouti  Doğan Kalafat  Otar Varazanashvili  Mustafa Erdik  Domenico Giardini 《Bulletin of Earthquake Engineering》2018,16(8):3465-3496

  相似文献   

Quantification of the amplitude variability of the ground motion in Argostoli,Greece. Variability of linear and non-linear structural response of a single degree of freedom system.     

E. Koufoudi  C. Cornou  S. Grange  F. Dufour  A. Imtiaz 《Bulletin of Earthquake Engineering》2018,16(9):3675-3685

The term “spatial variability of seismic ground motions” denotes the differences in the amplitude and phase content of seismic motions. The effect of such spatial variability on the structural response is still an open issue. In-situ experiments may be helpful in order to answer the questions regarding both the quantification of the spatial variability of the ground motion within the dimensions of a structure as well as the effect on its dynamic response. The goal of the present study is to quantify the variability of the seismic ground motion accelerations in the shallow sedimentary basin of Argostoli, Greece, and thereafter to identify its effect on the linear and non-linear elasto-plastic response of a single degree of freedom system in terms of spectral displacements. Around 400 earthquakes are used, recorded by the 21-element very dense seismological array deployed in Argostoli with inter-station spacing ranging from 5 to 160 meters. The seismic motion variability, evaluated in terms of spectral accelerations, is found to be significant and to increase with inter-station distance and frequency. Thereafter, the amplitude variability in terms of spectral displacements, which is indeed the linear response of a single degree of freedom (SDOF) system with various fundamental periods, is compared with the amplitude variability of a SDOF with non-linear elasto-plastic response. The variability of the maximum top displacement of the linear single degree of freedom system is estimated to be on average 12% with larger variabilities to be observed within two narrow frequency ranges (between 1.5 and 1.7 Hz and between 3 and 4 Hz). Such high variabilities are caused by locally edge-generated diffracted surface waves. The non-linear perfectly elasto-platic structural response of the SDOF system shows that although the variability has the same trends as in the case of linear response, it is almost constantly increased by 5%.  相似文献   

Experimental study on seismic behavior of Un-Reinforced Masonry (URM) brick walls strengthened with shotcrete     

M. Shabdin  Nader K. A. Attari  M. Zargaran 《Bulletin of Earthquake Engineering》2018,16(9):3931-3956

In this study, the efficiency of conventional shotcrete technique for strengthening of Un-Reinforced Masonry (URM) walls was shown using an experimental program. In addition, in this program the possible benefit of using anchors for connecting the shotcrete reinforcement layer to the R/C foundation was studied. The experimental program consisted of testing five full scale specimens with two different height-to-length aspect ratios and so different failure modes, under in-plane cyclic loading conditions. Two specimens were tested as reference and others were strengthened on a single-face using shotcrete layer. According to the results, strengthening of URM walls using traditional shotcrete approach created a completely stiff panel and prevented the formation of cracks. The failure mode in both reference and strengthened short length walls was rocking and the shotcrete layer could increase the strength capacity, energy dissipation, and stiffness of wall due to yielding and rupture of steel bars anchored to the foundation. On the other hand, in strengthened long length walls, shotcrete layer increased the shear sliding capacity with no or small increasing in their rocking capacity. Therefore, the failure mode of strengthened walls converted from shear sliding to rocking, even in the specimen with anchorage system. The distributed type of anchorage system could not improve the strength capacity of long length wall. Anchorage system was able to improve the out-of-plane performance of strengthened walls.  相似文献   

Evolution of seismic hazard maps in Turkey     

S. Akkar  T. Azak  T. Çan  U. Çeken  M. B. Demircioğlu Tümsa  T. Y. Duman  M. Erdik  S. Ergintav  F. T. Kadirioğlu  D. Kalafat  Ö. Kale  R. F. Kartal  K. Kekovalı  T. Kılıç  S. Özalp  S. Altuncu Poyraz  K. Şeşetyan  S. Tekin  A. Yakut  M. T. Yılmaz  M. S. Yücemen  Ö. Zülfikar 《Bulletin of Earthquake Engineering》2018,16(8):3197-3228

A review on the historical evolution of seismic hazard maps in Turkey is followed by summarizing the important aspects of the updated national probabilistic seismic hazard maps. Comparisons with the predecessor probabilistic seismic hazard maps as well as the implications on the national design codes conclude the paper.  相似文献   

Damage classification and derivation of damage probability matrices from L’Aquila (2009) post-earthquake survey data     

A. Rosti  M. Rota  A. Penna 《Bulletin of Earthquake Engineering》2018,16(9):3687-3720

Post-earthquake damage data represent an invaluable source of information for the seismic vulnerability assessment of the exposed building stock, as they are a direct evidence of the actual buildings’ performance under real seismic events. This paper exploits a robust and homogeneous database of damage data collected after the 2009 L’Aquila (Italy) earthquake, to derive damage probability matrices for several building typologies representative of the Italian building stock. To this aim, the first part of the work investigates several issues related to the definition of damage to be associated with each inspected building. Different approaches and damage conversion rules are applied, pointing out advantages and weaknesses of each one. Considering the widespread seismic damage observed on masonry infill panels and partitions of reinforced concrete constructions, the impact of this type of non-structural damage on empirical damage and functional loss distributions is explored. The second part of the study proposes different possible interpretations of the repartition of the observed damage in the different damage levels, showing in some cases a bimodal trend. Two novel hybrid procedures are outlined and compared with the classical binomial approach for predicting the subdivision of damage in the different levels. The application of the proposed methodologies to the different building typologies allows the selection, for each one, of the method providing the best fit to empirical results. The parameters required for the application of the optimal approach are reported in the paper, so that results can be used for forecasting the expected seismic damage in sites with similar seismic hazard and exposed buildings.  相似文献   

Cyclic testing of a full-scale two-storey reinforced precast concrete wall-slab-wall structure     

E. Brunesi  S. Peloso  R. Pinho  R. Nascimbene 《Bulletin of Earthquake Engineering》2018,16(11):5309-5339

  相似文献   

Deriving fragility functions from bilinearized capacity curves for earthquake scenario modelling using the conditional spectrum     

Clotaire Michel  Helen Crowley  Pia Hannewald  Pierino Lestuzzi  Donat Fäh 《Bulletin of Earthquake Engineering》2018,16(10):4639-4660

The development of fragility curves to perform seismic scenario-based risk assessment requires a fully probabilistic procedure in order to account for uncertainties at each step of the computation. This is especially true when developing fragility curves conditional on an Intensity Measure that is directly available from a ground-motion prediction equation. In this study, we propose a new derivation method that uses realistic spectra instead of design spectral shapes or uniform hazard spectra and allows one to easily account for the features of the site-specific hazard that influences the fragility, without using non-linear dynamic analysis. The proposed method has been applied to typical school building types in the city of Basel (Switzerland) and the results have been compared to the standard practice in Europe. The results confirm that fragility curves are scenario dependent and are particularly sensitive to the magnitude of the earthquake scenario. The same background theory used for the derivation of the fragility curves has allowed an innovative method to be proposed for the conversion of fragility curves to a common IM (i.e. spectral acceleration or PGA). This conversion is the only way direct comparisons of fragility curves can be made and is useful when inter-period correlation cannot be used in scenario loss assessment. Moreover, such conversion is necessary to compare and verify newly developed curves against those from previous studies. Conversion to macroseismic intensity is also relevant for the comparison between mechanical-based and empirical fragility curves, in order to detect possible biases.  相似文献