Gyldén Model: The Slowly Changing Equivalent Gravitational Parameter     

Cătălin Cucu-Dumitrescu  Dan Selaru 《Astrophysics and Space Science》1997,250(1):93-107

In the Gyldén problem, the case of slowly changing equivalent gravitational parameter (e.g.p.) is studied. Assuming the following law for the variation of the e.g.p.: μ (t) = μ₀+ εμ (εt), ε< μ₀, we obtained a) a O(ε⁴ T⁴)-approximation of the solution, on a shortened time scale (0,T), with T of order o(ε^-1),for the general case (i.e. the support function μ is O(1)-valued and admits an expansion in power series of its argument), and b) a O(ε²)-approximation of the solution, on a natural timescale of order O(1/ε), for the case of a bounded variation rate (i.e. the support function μ and its derivative are both O(1)-valued). For the study of the first problem we introduced a type of Lissajous variables and used the Lie-Hori normalization scheme; for the second problem we used the Delaunay variables and applied the von Zeipel method for approximate integration. The physical interpretation of the results is in both cases the same: within the corresponding limits of approximation, the variation of e.g.p. (i) has no effect on the size of the osculating ellipse, (ii) it sets the pericenter in slow rotation and (iii) it introduces a secular variation in the longitudes. This revised version was published online in July 2006 with corrections to the Cover Date.  相似文献   

Numerical Solution of Lock-Release Gravity Current with Viscous Self-Similar Regime     

张立柱李行伟  陈国谦 《中国海洋工程》2004,18(1):157-162

Lock-release gravity currents with a viscous self-similar regime are simulated by use of the renormalization group(RNG) k - ε model for Reynolds-stress closure. Besides the turbulent regime with initially a slumping phase of a conslant current front speed and later an inviseid self-similar phase of front speed decreasing as t^-1/3(where t is the time measured from release), the viseous self-similar regime is satisfactorily reproduced with front speed decreasing as t^-4/5,consistent with well known experimental observations.  相似文献   

Infinitesimal orbits around lagrange points in the elliptic,restricted three-body problem     

Dan Şelaru  Cătălin Cucu-Dumitrescu 《Celestial Mechanics and Dynamical Astronomy》1995,61(4):333-346

This study presents a method of obtaining asymptotic approximations for motions near a Lagrange point in the planar, elliptic, restricted three-body problem by using a von Zeipel-type method. The calculations are carried out for a second-order escape solution in the proximity of the equilateral Lagrange point, L ₄, where the primaries' orbital eccentricity is taken as the small parameter .  相似文献   

Oil-generation kinetics for organic facies with Type-II and -IIS kerogen in the Menilite Shales of the Polish Carpathians     

M.D. Lewan  M.J. Kotarba  D. Wi?c?aw 《Geochimica et cosmochimica acta》2006,70(13):3351-3368

The Menilite Shales (Oligocene) of the Polish Carpathians are the source of low-sulfur oils in the thrust belt and some high-sulfur oils in the Carpathian Foredeep. These oil occurrences indicate that the high-sulfur oils in the Foredeep were generated and expelled before major thrusting and the low-sulfur oils in the thrust belt were generated and expelled during or after major thrusting. Two distinct organic facies have been observed in the Menilite Shales. One organic facies has a high clastic sediment input and contains Type-II kerogen. The other organic facies has a lower clastic sediment input and contains Type-IIS kerogen. Representative samples of both organic facies were used to determine kinetic parameters for immiscible oil generation by isothermal hydrous pyrolysis and S₂ generation by non-isothermal open-system pyrolysis. The derived kinetic parameters showed that timing of S₂ generation was not as different between the Type-IIS and -II kerogen based on open-system pyrolysis as compared with immiscible oil generation based on hydrous pyrolysis. Applying these kinetic parameters to a burial history in the Skole unit showed that some expelled oil would have been generated from the organic facies with Type-IIS kerogen before major thrusting with the hydrous-pyrolysis kinetic parameters but not with the open-system pyrolysis kinetic parameters. The inability of open-system pyrolysis to determine earlier petroleum generation from Type-IIS kerogen is attributed to the large polar-rich bitumen component in S₂ generation, rapid loss of sulfur free-radical initiators in the open system, and diminished radical selectivity and rate constant differences at higher temperatures. Hydrous-pyrolysis kinetic parameters are determined in the presence of water at lower temperatures in a closed system, which allows differentiation of bitumen and oil generation, interaction of free-radical initiators, greater radical selectivity, and more distinguishable rate constants as would occur during natural maturation. Kinetic parameters derived from hydrous pyrolysis show good correlations with one another (compensation effect) and kerogen organic-sulfur contents. These correlations allow for indirect determination of hydrous-pyrolysis kinetic parameters on the basis of the organic-sulfur mole fraction of an immature Type-II or -IIS kerogen.  相似文献   

Water pollution in gold mining industry: a case study in Roşia Montană district, Romania     

R. M. Florea  A. I. Stoica  G. E. Baiulescu  P. Capotă 《Environmental Geology》2005,48(8):1132-1136

The preliminary study of streams and rivers from the Roşia Montană area revealed that the concntration of heavy metals— Cd, Mn, Cu, Pb, and Zn—are above accepted limits. The gold extraction method is based on flotation. The most important pollution sources are mine tailings. The determinations were performed for samples collected in: April 2004, July 2004, September 2004, November 2004, February 2005 and May 2005. The highest concentrations were found for cadmium in September 2004: 0.17 mg/L; for copper in September 2004: 1.38 mg/L; for manganese in July 2004: 239.4 mg/L; for lead in May 2005: 0.54 mg/L; and for zinc in September 2004: 35.37 mg/L;. This study involved three small rivers (streams) that flow into the Mureş River and finally into the Danube River, having a great impact on human health and environmental stability in the area. In May 2005, a sample of drinking water from the mining district was also collected.  相似文献   

A methodology for regionalizing 3‐D effective porosity at watershed scale in crystalline aquifers          下载免费PDF全文

Benoît Dewandel  Yvan Caballero  Jérôme Perrin  Alexandre Boisson  Fabrice Dazin  Sylvain Ferrant  Subash Chandra  Jean‐Christophe Maréchal 《水文研究》2017,31(12):2277-2295

An innovative approach for regionalizing the 3‐D effective porosity field is presented and applied to two large, overexploited, and deeply weathered crystalline aquifers located in southern India. The method derives from earlier work on regionalizing a 2‐D effective porosity field in that part of an aquifer where the water table fluctuates, which is now extended over the entire aquifer using a 3‐D approach. A method based on geological and geophysical surveys has also been developed for mapping the weathering profile layers (saprolite and fractured layers). The method for regionalizing 3‐D effective porosity combines water table fluctuation and groundwater budget techniques at various cell sizes with the use of satellite‐based data (for groundwater abstraction), the structure of the weathering profile, and geostatistical techniques. The approach is presented in detail for the Kudaliar watershed (983 km²) and tested on the 730 km² Anantapur watershed. At watershed scale, the effective porosity of the aquifer ranges from 0.5% to 2% in Kudaliar and between 0.3% and 1% in Anantapur, which agrees with earlier works. Results show that (a) depending on the geology and on the structure of the weathering profile, the vertical distribution of effective porosity can be very different and that the fractured layers in crystalline aquifers are not necessarily characterized by a rapid decrease in effective porosity and (b) that the lateral variations in effective porosity can be larger than the vertical ones. These variations suggest that within a same weathering profile, the density of open fractures and/or degree of weathering in the fractured zone may significantly vary from a place to another. The proposed method provides information on the spatial distribution of effective porosity that is of prime interest in terms of flux and contaminant transport in crystalline aquifers. Implications for mapping groundwater storage and scarcity are also discussed, which should help in improving groundwater resource management strategies.  相似文献   

Application of landslide hazard scenarios at annual scale in the Niraj River basin (Transylvania Depression,Romania)     

Roşca Sanda  Bilaşco Ştefan  Petrea Dănuţ  Fodorean Ioan  Vescan Iuliu  Filip Sorin 《Natural Hazards》2015,77(3):1573-1592

  相似文献   

Tilting Styx and Nix but not Uranus with a Spin-Precession-Mean-motion resonance     

Alice C. Quillen  Yuan-Yuan Chen  Benoît Noyelles  Santiago Loane 《Celestial Mechanics and Dynamical Astronomy》2018,130(2):11

A Hamiltonian model is constructed for the spin axis of a planet perturbed by a nearby planet with both planets in orbit about a star. We expand the planet–planet gravitational potential perturbation to first order in orbital inclinations and eccentricities, finding terms describing spin resonances involving the spin precession rate and the two planetary mean motions. Convergent planetary migration allows the spinning planet to be captured into spin resonance. With initial obliquity near zero, the spin resonance can lift the planet’s obliquity to near 90\(^\circ \) or 180\(^\circ \) depending upon whether the spin resonance is first or zeroth order in inclination. Past capture of Uranus into such a spin resonance could give an alternative non-collisional scenario accounting for Uranus’s high obliquity. However, we find that the time spent in spin resonance must be so long that this scenario cannot be responsible for Uranus’s high obliquity. Our model can be used to study spin resonance in satellite systems. Our Hamiltonian model explains how Styx and Nix can be tilted to high obliquity via outward migration of Charon, a phenomenon previously seen in numerical simulations.  相似文献   

Land-surface segmentation as a method to create strata for spatial sampling and its potential for digital soil mapping     

L. Drăguţ  A. Dornik 《International journal of geographical information science》2016,30(7):1359-1376

Sampling efforts are constrained by limited availability of resources. Therefore, methods to reduce the number of samples, while still achieving reasonable accuracy are needed. Land-surface segmentation (LSS) has proven a powerful technique to partition digital elevation models (DEMs) and their derivatives into relatively homogeneous areas, which can be further employed as support in soil sampling. Though topography is one of the main soil forming factors, a robust assessment of the potential of this technique to digital soil mapping (DSM) is still missing. In this study, we aimed at evaluating the potential of LSS in stratifying a landscape into relatively homogeneous areas, which can be used as strata for guiding the selection of sampling points in DSM. The experiments were carried out in two study areas where soil samples were available. Land-surface derivatives were derived from DEMs and segmented with a tool based on the multiresolution segmentation algorithm, into objects considered as homogeneous soil-landscape divisions. Thus, one sample was randomly selected within each segment from the existing sample data, based on which predictions of soil classes/sub-orders and properties, i.e. soil texture and A-horizon thickness, were made. Results were compared with predictions based on simple random sampling (SRS) and conditioned Latin hypercube (cLHS). The segmentation-based sampling (SBS) scheme performed better than SRS and cLHS schemes in predicting the A-horizon thickness, soil texture fractions and soil classes, showing a high potential of LSS in stratifying a landscape for the purposes of DSM. The novelty of this study is in the way strata are constructed, rather than in the sampling design itself. Further research is needed to demonstrate the value of a SBS design for practical use. The analyses presented here further highlight the importance of considering locally adaptive techniques in optimization of sampling schemes and predictions of soil properties.  相似文献   

The measurement of soil gases and shallow temperature for determination of active faults in a geothermal area: a case study from Ömer–Gecek,Afyonkarahisar (West Anatolia)     

Ahmet Yıldız  Can Başaran  Metin Bağcı  Ayla Gümüş  Feyzullah Ekrem Çonkar  Yusuf Ulutürk  Hüseyin Ali Yalım 《Arabian Journal of Geosciences》2018,11(8):175

Afyonkarahisar is a very important geothermal province of western Anatolia and has low and medium enthalpy geothermal areas. This study has been carried out for the preparation of distribution maps of soil gases (radon and carbon dioxide) and shallow soil temperature and the exploration of permeable tectonic regions associated with geothermal systems and reveal the origins of radon and carbon dioxide gases. The western district of the study area is characterized by the high radon concentration (168.30 kBq/m³), carbon dioxide ratio (0.30%), and soil temperature (21.0 °C) values. Fethibey and Demirçevre faults, which allow the circulation of geothermal fluids, have been detected in the distribution maps of radon, carbon dioxide, and shallow depth temperature and the directions of the curves in these maps correspond to the strikes of Demirçevre faults. The effect of the fault plays an important role in the change of carbon dioxide concentration along the W-E directional geological section prepared to determine the change of soil gas and shallow depth temperature values depending on lithological differences, fault existence, and geothermal reservoir depth. On the other hand, it was determined that Rn²²² concentration and soil temperature changed as a function of geothermal reservoir depth or lithological difference. Tuffs in Köprülü volcano-sedimentary units are the main source of radon due to their higher uranium contents. Besides, the carbon dioxide in Ömer–Gecek soils has geothermal origin because of the highest carbon dioxide content (99.3%) in non-condense gas. The similarities in patterns of soil temperature, radon, and carbon dioxide indicate that the variation in soil temperatures is related to radon and carbon dioxide emissions. It is concluded that soil gas and temperature measurements can be used to determine the active faults in the initial stage of geothermal exploration successfully.  相似文献