Experimental partitioning of trace elements into schreibersite with applications to IIG iron meteorites     

Nancy L. Chabot  Rachel H. Cueva  Andrew W. Beck  Richard D. Ash 《Meteoritics & planetary science》2020,55(4):726-743

Some of the defining characteristics of the IIG iron meteorite group are their high bulk P contents and massive, coarse schreibersite, which have been calculated to make up roughly 11–14 wt% of each specimen. In this study, we produced two data sets to investigate the formation of schreibersites in IIG irons: measurements of trace elements in the IIG iron meteorite Twannberg and experimental determinations of trace element partitioning into schreibersite. The schreibersite‐bearing experiments were conducted with schreibersite in equilibrium with a P‐rich melt and with bulk Ni contents ranging from 0 to 40 wt%. The partitioning behavior for the 20 elements measured in this study did not vary with Ni content. Comparison of the Twannberg measurements with the experimental results required a correction factor to account for the fact that the experiments were conducted in a simplified system that did not contain a solid metal phase. Previously determined solid metal/P‐rich melt partition coefficients were applied to infer schreibersite/solid metal partitioning behavior from the experiments, and once this correction was applied, the two data sets showed broad similarities between the schreibersite/solid metal distribution of elements. However, there were also differences noted, in particular between the Ni and P contents of the solid metal relative to the schreibersite inferred from the experiments compared to that measured in the Twannberg sample. These differences support previous interpretations that subsolidus schreibersite evolution has strongly influenced the Ni and P content now present in the solid metal phase of IIG irons. Quantitative attempts to match the IIG solid metal composition to that of late‐stage IIAB irons through subsolidus schreibersite growth were not successful, but qualitatively, this study corroborates the striking similarities between the IIAB and IIG groups, which are highly suggestive of a possible genetic link between the groups as has been previously proposed.  相似文献   

Extension tectonics in the Afar Triangle     

Tony Waltham 《Geology Today》2005,21(3):101-107

On the Red Sea coast of Africa, the triangular wedge of land named after its Afar people has been created by excess basalt production at a triple junction of divergent plate boundaries. Its harsh desert terrain is a remote wilderness that receives few visitors, yet is a spectacular suite of extension tectonics dominated by sinking grabens, salt basins below sea level, active faults and effusive volcanoes.  相似文献   

Physical characteristics of Comet Nucleus C/2001 OG₁₀₈ (LONEOS)     

Paul A. Abell  Yanga R. Fernández  Petr Pravec  Tony L. Farnham  Paul S. Hardersen  Peter Kušnirák  Scott S. Sheppard 《Icarus》2005,179(1):174-194

  相似文献   

New Developments in Water Efficiency     

Tony T. Gregg Amanda Dewees Drema Gross Bill Hoffman Dan Strub Matt Watson 《中国海洋大学学报(英文版)》2006,5(4):375-380

1Water LossInitiativesUnaccounted-for water(or unbilled water)has beenreceiving newscrutiny at both the state and nationallevels.For years,water conservationeffortsin Europehave emphasized reduction in water loss to a muchgreater extent thaninthe United S…  相似文献   

Models of aggradation versus progradation in the Himalayan Foreland   总被引：1，自引：0，他引：1  

Douglas W. Burbank  Richard A. Beck 《International Journal of Earth Sciences》1991,80(3):623-638

A frequent goal of decompaction analysis is to reconstruct histories of basin subsidence and tectonic loading. In marine environments, eustatic and paleobathymetric uncertainties limit the resolution of these reconstructions. Whereas in the terrestrial basins, these ambiguities are absent, it is still necessary to account for depositional slopes between localities in order to analyze three-dimensional patterns of subsidence. We define two end-members for depositional surfaces: aggradation and progradation. The relative importance of either end-member is a function of the interplay between the rate of net sediment accumulation and the rate of basin subsidence. The models predict the patterns of major drainages (transverse versus longitudinal) and the way in which provenance should be reflected within different portions of a basin. Consequently, paleocurrent and provenance data from the ancient stratigraphic record can be used to distinguish between these endmembers. The subhorizontal depositional surfaces that dominate during times of aggradation provide a well defined reference frame for regional analysis of decompacted stratigraphies and related subsidence. Depositional slopes during progradation can not be as precisely specified, and consequently yield greater uncertainties in reconstructions of subsidence. These models are applied to the Mio-Pliocene foreland basin of the northwestern Himalaya, where sequences of isochronous strata have been analyzed throughout the basin. These time-controlled data delineate a distinctive evolution from largely aggradational to largely progradational depositional geometries as deformation progressively encroaches on the foreland. Such a reconstruction of past depositional surfaces provides a well constrained reference frame for subsequent integration of subsidence histories from throughout the foreland.

---

Zusammenfassung Ein häufiges Ziel der Dekompaktionsanalyse ist es die Beckenabsenkung und die tektonische Belastung zu rekonstruieren. In marinen Ablagerungsräumen limitieren eustatische und paläobathymetrische Unsicherheiten die Auflösung der Rekonstruktion. Bei terrestrischen Becken fehlen diese Zweideutigkeiten; es ist aber trotzdem notwendig, Rechenschaft über den Ablagerungshang zwischen verschiedenen Lokalitäten abzulegen, um dreidimensionale Subsidenzmuster zu analysieren. Wir definieren zwei Endglieder von Ablagerangsflächen: Aggradation und Progradation. Die relative Wichtigkeit des jeweiligen Endglieds ist eine Funktion des Zusammenspiels zwischen der Nettorate der Sedimentakkumulation und der Beckensubsidenz. Die Modelle sagen die Hauptentwässerungsmuster (quer- oder längsverlaufend) vorher, sowie den Weg in dem die Sedimentherkunft innerhalb verschiedener Bereiche des Beckens berücksichtigt werden sollte. Folglich können Paläoströmungs- und Herkunftsdaten alter stratigraphischer Überlieferungen benutzt werden, um zwischen den Endgliedern zu unterscheiden. Die subhorizontale Ablagerungsfläche welche zur Zeit der Aggradation dominant ist, liefert einen gut definierten Referenzrahmen für die regionale Analyse von dekomprimierten Formationen und der damit verknüpften Subsidenz. Ablagerangshänge während Progradation können nicht präzise spezifiziert werden und beinhalten daher größere Unsicherheiten bei der Rekonstruktion der Subsidenz. Diese Modelle wurden übertragen auf das miozäne bis pliozäne Vorgebirgsbecken des nordwestlichen Himalayas, wo Sequenzen von isochronen Schichten durch das gesamte Becken analysiert werden konnten. Diese zeitkontrollierten Daten schildern eine ganz bestimmte Entwicklung, die von einer hauptsächlich aggradierenden zu einer progradierenden Ablagerangsgeometrie verlief, während der die Deformation schrittweise in Richtung Vorland übergriff. Diese Rekonstruktion von ehemaligen Ablagerangsflächen liefert einen guten Referenzrahmen für die folgende Integration der Subsidenzgeschichte des gesamten Vorlands.

---

Résumé L'analyse de décompaction a souvent pour but de reconstituer l'histoire de la subsidence d'un bassin et de la charge tectonique. Dans les milieux marins, de telles reconstitutions sont limitées par des incertitudes de caractère eustatique et paléobathymétrique. Par contre, ces ambiguïtés ne se présentent pas dans le cas des bassins continentaux, où il convient néanmoins de tenir compte de la pente de la surface de dépôt entre les divers points considérés pour établir un schéma tridimensionnel de la subsidence. Nous définissons deux situations extrêmes pour les surfaces de dépôt: l'aggradation et la progradation. L'importance relative de ces deux extrêmes est fonction de l'interaction entre le taux d'accumulation net des sédiments et le taux de subsidence du bassin. Les modèles prévoient la répartition des drainages principaux (transverse ou longitudinal) et la manière dont l'origine des sédiments peut se répercuter dans les diverses parties d'un bassin. Il en résulte que des informations fournies par les relevés stratigraphiques à propos des paléocourants et de la source des sédiments peuvent être utilisées pour faire la distinction entre les deux cas extrêmes. Les surfaces de dépôt subhorizontales, qui prédominent pendant les périodes d'aggradation, fournissent un bon cadre de référence pour les analyses régionales de formations décompactées et de la subsidence qui leur est associée. Les surfaces de dépôt inclinées qui se présentent au cours des progradations ne peuvent pas être définies de manière aussi précise et engendrent par conséquent plus d'incertitude dans la reconstitution de la subsidence. Les auteurs appliquent ces modèles au bassin mio-pliocène d'avant-pays de l'Himalaya nord-occidental, dans lequel des séquences de couches isochrones ont été suivies à travers tout le bassin. Ces données, chronologiquement définies, fournissent l'image d'une évolution nette, depuis des géométries typiques d'aggradation jusqu' à des géométries typiques de progradation, au fur et à mesure de l'emprise progressive de la déformation sur l'avant-pays. Une telle reconstitution des surfaces de dépôt anciennes fournit un bon cadre de référence en vue de l'intégration ultérieure de l'histoire de la subsidence dans l'ensemble de l'avant-pays.

---

. . ; , , . « » « ». . , , . , , , . , , . , . , . , , . .

  相似文献   

Shear strength characterization of municipal solid waste at the Suzhou landfill, China   总被引：5，自引：0，他引：5  

Tony L.T. Zhan  Y.M. Chen  W.A. Ling 《Engineering Geology》2008,97(3-4):97-111

The current practice of slope stability analysis for a municipal solid waste (MSW) landfill usually overlooks the dependence of waste properties on the fill age or embedment depth. Changes in shear strength of MSW as a function of fill age were investigated by performing field and laboratory studies on the Suzhou landfill in China. The field study included sampling from five boreholes advanced to the bottom of the landfill, cone penetration tests and monitoring of pore fluid pressures. Twenty-six borehole samples representative of different fill ages (0 to 13 years) were used to perform drained triaxial compression tests. The field and laboratory study showed that the waste body in the landfill can be sub-divided into several strata corresponding to different ranges of fill age. Each of the waste strata has individual composition and shear strength characteristics. The triaxial test results showed that the MSW samples exhibited a strain-hardening and contractive behavior. As the fill age of the waste increased from 1.7 years to 11 years, the cohesion mobilized at a strain level of 10% was found to decrease from 23.3 kPa to 0 kPa, and the mobilized friction angle at the same strain level increasing from 9.9° to 26°. For a confinement stress level greater than 50 kPa, the shear strength of the recently-placed MSW seemed to be lower than that of the older MSW. This behavior was consistent with the cone penetration test results. The field measurement of pore pressures revealed a perched leachate mound above an intermediate cover of soils and a substantial leachate mound near the bottom of the landfill. The measurements of shear strength properties and pore pressures were utilized to assess the slope stability of the Suzhou landfill.  相似文献   

Cycling of trace metals (Mn, Fe, Mo, U, V, Cr) in deep pore waters of intertidal flat sediments     

Melanie Beck  Olaf Dellwig  Hans-Jürgen Brumsack 《Geochimica et cosmochimica acta》2008,72(12):2822-2840

Trace metals (Mn, Fe, Mo, U, Cr, V) were studied in pore waters of an intertidal flat located in the German Wadden Sea. The study system is an example of a permeable tidal flat system where pore water exchange is affected by tidal driven pressure gradients besides diffusion. Permanently installed in situ samplers were used to extract pore waters down to 5 m depth throughout one year. The samplers were either located close to the tidal flat margin or in central parts of the tidal flat. Despite dynamic sedimentological and hydrological conditions, the general trends with depth in deep tidal flat pore waters are remarkably similar to those observed in deep sea environments. Rates of trace metal cycling must be comparably large in order to maintain the observed pore water profiles. Trace metals further show similar general trends with depth close to the margin and in central parts of the tidal flat. Seasonal sampling revealed that V and Cr vary concurrent with seasonal changes in dissolved organic carbon (DOC) concentration. This effect is most notable close to the tidal flat margin where sulphate, DOC, and nutrients vary with season down to some metres depth. Seasonal variations of Mn, Fe, Mo, and U are by contrast limited to the upper decimetres of the sediment. Their seasonal patterns depend on organic matter supply, redox stratification, and particulate matter deposited on sediment surfaces. Pore water sampling within one tidal cycle provides evidence for pore water advection in margin sediments. During low tide pore water flow towards the creekbank is generated by a hydraulic gradient suggesting that deep pore waters may be seeping out of creekbank sediments. Owing to the enrichment of specific elements like Mn in pore water compared to sea water, seeping pore waters may have an impact on the chemistry of the open water column. Mass balance calculations reveal that the impact of deep pore waters on the Mn budget in the open water column is below 4%. Mn deep pore water discharge of the whole Wadden Sea is estimated to be about 9% of the total dissolved riverine Mn input into the Southern North Sea.  相似文献   

An improved Ewing heat probe frame   总被引：3，自引：0，他引：3  

Tony F. Clark  Frank J. Malcolm  Ben J. Korgen 《Marine Geophysical Researches》1972,1(4):451-455

The standard Ewing heat probe frame has been improved through the design of a new takedown model whose parts are held together by lynch pins. When a 600 lb (272 kg) unit of this type is taken apart, the heaviest single piece of the dismantled unit weighs only 75 lb (34 kg).This makes it feasible for one person to handle, transport, and assemble the new unit. A central, main support member of a heat probe using this frame can be suspended over the side of a research vessel while the heavier temperature recorder and ballast weights are attached by means of the quickaction lynch pins. This makes it possible to use this device on relatively small vessels which are not designed for coring work, having a minimum of free deck space and without launching platforms or hydraulic A-frame booms.  相似文献   

Nodules and Scandinavia — mining opportunities     

Tony Marjoram 《Marine Policy》1979,3(4):313-315

  相似文献   

Pity the poor herring     

Tony Loftas  Editor 《Marine Policy》1977,1(4):274

  相似文献