A Pull-Up Shallow Water Seismometer     

W. A. Smith  P. A. F. Christie 《Marine Geophysical Researches》1977,3(3):235-250

An inexpensive Pull-Up Shallow Water Seismometer (PUSS) has been designed and built to conduct long range seismic refraction experiments in the North Sea and the continental shelf around Britain, with the particular goal of studying the crustal and lithospheric structure under the epeirogenic basin of the North Sea. Signals from a gimbal-mounted 3-component geophone and a hydrophone are frequency modulated and mixed with clock and flutter correction signals before being recorded on a standard speed cassette tape recorder, with one hour of recording time. A 100 hour programmable timer allows the interval between the time of reset of the clock and each shot window of optional 5 or 10 min duration, to be preselected. The PUSS is launched and recovered using a pull-up technique originally developed for current meters. The replay system is also described.In May 1976 sea trials of 5 PUSSes were conducted along a 200 km refraction line in the North Sea. The encouraging performance of the equipment resulted in the decision to build a further 10 units and to proceed with a 400 km refraction line planned for the summer of 1977.  相似文献   

Reservoir description using dynamic parameterisation selection with a combined stochastic and gradient search     

Lars Kristian Nielsen  Sam Subbey  Mike Christie  Trond Mannseth 《Computational Geosciences》2006,10(3):321-342

There is a correspondence between flow in a reservoir and large scale permeability trends. This correspondence can be derived by constraining reservoir models using observed production data. One of the challenges in deriving the permeability distribution of a field using production data involves determination of the scale of resolution of the permeability. The Adaptive Multiscale Estimation (AME) seeks to overcome the problems related to choosing the resolution of the permeability field by a dynamic parameterisation selection. The standard AME uses a gradient algorithm in solving several optimisation problems with increasing permeability resolution. This paper presents a hybrid algorithm which combines a gradient search and a stochastic algorithm to improve the robustness of the dynamic parameterisation selection. At low dimension, we use the stochastic algorithm to generate several optimised models. We use information from all these produced models to find new optimal refinements, and start out new optimisations with several unequally suggested parameterisations. At higher dimensions we change to a gradient-type optimiser, where the initial solution is chosen from the ensemble of models suggested by the stochastic algorithm. The selection is based on a predefined criterion. We demonstrate the robustness of the hybrid algorithm on sample synthetic cases, which most of them were considered insolvable using the standard AME algorithm.  相似文献   

Preface     

Mike Christie  Margot Gerritsen 《Computational Geosciences》2005,9(2-3):73-74

  相似文献   

Multi‐proxy study of Holocene environmental change and human activity in the Central Apennine Mountains,Italy     

A. G. Brown  J. Hatton  K. A. Selby  M. J. Leng  N. Christie 《第四纪科学杂志》2013,28(1):71-82

This paper describes a multi‐proxy palaeoecological investigation undertaken in conjunction with an archaeological survey of the Upper Sangro Valley in the Abruzzo National Park, Central Italy. Despite being a biodiversity hotspot and regarded as a near‐pristine area, the pollen, spore and diatom data all show major changes in the vegetation extending to over 2000 m a.s.l. during the mid to late Holocene. Although there are changes in ecological composition earlier in the Holocene they are different in type and magnitude from the changes which began about 800 cal a BC. The pollen and diatom evidence do not correlate well with regional palaeoclimate data, or on‐site isotopic evidence, but do appear to be related to Samnite (later Iron Age) clearance and upland grazing associated with transhumance and later annexation (and centuriation) of the lower slopes by Roman surveyors. The greatest change in vegetation was during the period c. AD 500–600 and corresponds with the Byzantine–Gothic Wars, and Lombard–Carolingian settlement reorganization into nucleated hilltop settlements which managed upland grazing. This pattern of intensive land use at all altitudes persisted until the early 20th century and only changed following rural depopulation after World War II. These data illustrate how cultural factors had a profound effect on this mountainous region which, in this case, far outweighed the effects of climatic fluctuations which are known to have occurred from both this study area and the region. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

The Karoo Basin of South Africa: type basin for the coal-bearing deposits of southern Africa     

A.B. Cadle  B. Cairncross  A.D.M. Christie  D.L. Roberts 《International Journal of Coal Geology》1993,23(1-4)

The coal-bearing sediments and coal seams of the Karoo Basin, Southern Africa are described and discussed. The Karoo Basin is bounded on its southern margin by the Cape Fold Belt, onlaps onto the Kaapvaal Craton in the north and is classified as a foreland basin. Coal seams are present within the Early Permian Vryheid Formation and the Triassic Molteno Formation.The peats of the Vryheid Formation accumulated within swamps in a cool temperate climatic regime. Lower and upper delta plain, back-barrier and fluvial environments were associated with peat formation. Thick, laterally extensive coal seams have preferentially accumulated in fluvial environments. The coals are in general inertinite-rich and high in ash. However, increasing vitrinite and decreasing ash contents within seams occur from west to east across the coalfields. The Triassic Molteno coal seams accumulated with aerially restricted swamps in fluvial environments. These Molteno coals are thin, laterally impersistent, vitrinite-rich and shaly, and formed under a warm temperate climatic regime.Palaeoclimate, depositional systems, differential subsidence and basin tectonics influence to varying degrees, the maceral content, thickness and lateral extent of coal seams. However, the geographic position of peat-forming swamps within a foreland basin, coupled with basin tectonics and differential subsidence are envisaged as the primary controls on coal parameters. The Permian coals are situated in proximal positions on the passive margin of the foreland basin. Here, subsidence was limited which enhanced oxidation of organic matter and hence the formation of inertinitic coals. The coals in this tectonic setting are thick and laterally extensive. The Triassci coals are situated within the tectonically active foreland basin margin. Rapid subsidence and sedimentation rates occurred during peat formation which resulted in the preservation of thin, laterally impersistent, high ash, vitrinite-rich, shaly coals.  相似文献   

Lithological and spatial controls on the distribution of quartz veins in andesite- and rhyolite-hosted epithermal Au–Ag deposits of the Hauraki Goldfield, New Zealand     

Robert L. Brathwaite  Hugh J. Cargill  Anthony B. Christie  Andrew Swain 《Mineralium Deposita》2001,36(1):1-12

Vein distributions in line samples from four epithermal Au–Ag deposits of the Hauraki Goldfield were logged and quantified by vein spacing, vein density, vein thickness and percentage of vein extension. One deposit is hosted in andesite lavas (Martha Hill), one in andesite lavas and dacite porphyry, dacitic tuffs and pyroclastic breccias (Golden Cross), and two in rhyolite lavas and rhyolitic tuffs with minor andesite lavas or andesite dikes (Ohui and Wharekirauponga). The vein systems in these deposits form fault-controlled arrays of extensional veins. Vein spacing distributions are non-fractal over two to three orders of magnitude (1 mm to 5 m), and therefore fractal dimension statistics are not applicable. The coefficient of variation (C_v) of vein spacing was used as a measure of the degree of vein clustering. Rock type has a marked influence on vein spacing distributions, with veining in rhyolite lava having lower average thickness and percentage extension, but a generally higher degree of vein clustering compared with veining in andesite lava in the same deposit. Vein spacing distributions in well-jointed lithologies, mainly andesite lava, have C_v values (0.8–1.2) that are indicative of anticlustered to weakly clustered patterns, particularly in the vein stockwork of the upper part of the Golden Cross deposit. These C_v values are consistent with field observations that joints are a major control on vein spacing. In the poorly jointed dacitic and rhyolitic rocks, the veins are weakly to strongly clustered as shown by higher C_v values (1.2–2.4), and are commonly associated with normal faults. Overall, andesite lava and dacite porphyry and pyroclastics host thicker and more persistent veins than rhyolite lava and tuff. These larger veins contain significant volumes of high-grade gold mineralisation. The higher chemical reactivity to hydrothermal fluids of andesite and dacite compared with rhyolite may have aided propagation and thickening of the veins in andesite-hosted deposits. Within an individual epithermal deposit, location close to thick veins, representing major fluid conduits, commonly overrides the effect of different lithologies. Sites that are deeper and located within or adjacent to major vein structures have higher average vein thickness, percentage extension and degree of vein clustering. Systematic collection and analysis of vein spacing, thickness and density data can be used to define trends that are useful in the exploration of gold-bearing epithermal vein deposits. Received: 25 August 1998 / Accepted: 23 December 1999  相似文献   

Dislocation substructure of experimentally deformed olivine     

J. D. Blacic  J. M. Christie 《Contributions to Mineralogy and Petrology》1973,42(2):141-146

Dunite, experimentally deformed at 800° C, exhibits predominantly pure screw dislocations parallel to [001] and dense, tangled zones of dislocations subparallel to the plane (001). Olivine single crystals experimentally deformed at 900° C, are characterized by pure screw dislocations parallel to [001] and [100], and dislocations of undetermined character with Burgers vectors [001]. All observations are consistent with deformation mechanisms deduced from optically visible features.  相似文献   

Effects of fish factory effluent on the benthic macrofauna of Saldanha Bay     

N.D. Christie  A. Moldan 《Marine pollution bulletin》1977,8(2):41-45

A survey was conducted adjacent to a pelagic fish canning factory in Saldanha Bay, South Africa, to determine the effects of effluent on the benthic macrofauna. Pairs of samples were taken using Scuba diving techniques at each of five stations situated at increasing distances from the factory. The benthic macrofauna was analysed using numerical methods of classification and ordination thereby defining three groups of stations. The macrofauna nearest the factory was impoverished with several species having only small individuals but with distance from the factory species richness, species density, density of individuals and ash-free biomass increased. Although conditions adversely affected some of the macrofauna at the five stations, the situation has undoubtedly improved since June 1972, when a huge benthic mortality occurred.  相似文献   

Mechanical twinning in diopside Ca(Mg,Fe)Si2O6: Structural mechanism and associated crystal defects     

Stephen H. Kirby  John M. Christie 《Physics and Chemistry of Minerals》1977,1(2):137-163

Diopside twins mechanically on two planes, (100) and (001), and the associated macroscopic twinning strains are identical (Raleigh and Talbot, 1967). An analysis based on crystal structural arguments predicts that both twin mechanisms involve shearing of the (100) octahedral layers (containing Ca²⁺, Mg²⁺ and Fe²⁺ ions) by a magnitude of c/2. Small adjustments or shuffles occur in the adjacent layers containing the [SiO₄]^4? tetrahedral chains. While the (100) twins are conventional with shear parallel to the composition plane, this analysis predicts that (001) twins form by a mechanism closely related to kinking. A polycrystalline diopside specimen was compressed 8% at a temperature of 400° C, a pressure of 16 kilobars, and a compressive strain rate of about 10^?4/s. Transmission electron microscopy on this specimen has revealed four basic lamellar features:

1. (100) mechanical twin lamellae;
2. (100) glide bands containing unit dislocations;
3. (001) twin lamellae;
4. (101) lamellar features, not as yet identified.

The (001) twins often contain remnant (100) lamellae of untwinned host. Twinning dislocations occur in these (100) lamellae and in the (001) twin boundaries with very high densities. Diffraction contrast experiments indicate that the twinning dislocations associated with both twin laws glide on (100) with Burgers vector b=X [001] where X is probably equal to 1/2 on the basis of the structural analysis. Parallels are drawn between mechanical twinning in clinopyroxenes and clinoamphiboles. The exclusive natural occurrence of basal twins in shock-loaded clinopyroxenes and of analogous ( \(\bar 1\) 01) twins in clinoamphiboles is given a simple explanation in terms of the relative difficulty of the “kinking” mechanism as compared to direct glide parallel to the composition plane.  相似文献   

Geochronology and geochemistry of lavas from the 1996 North Gorda Ridge eruption     

K.H. Rubin  M.C. Smith  M.R. Perfit  D.M. Christie  L.F. Sacks 《Deep Sea Research Part II: Topical Studies in Oceanography》1998,45(12):2571-2597

Radiometric dating of three North Gorda Ridge lavas by the ²¹⁰Po–²¹⁰Pb method confirms that an eruption occurred during a period of increased seismic activity along the ridge during late February/early March 1996. These lavas were collected following detection of enhanced T-phase seismicity and subsequent ocean bottom photographs documented the existence of a large pillow mound of fresh-appearing lavas. ²¹⁰Po–²¹⁰Pb dating of these lavas indicates that an eruption coinciding with this seismicity did occur (within analytical error) and that followup efforts to sample the recent lava flows were successful. Compositions of the three confirmed young lavas and eleven other samples of this contiguous “new flow” sequence are distinct from older lavas from this area but are variable at a level outside analytical uncertainty. These intraflow variations can not easily be related to a single, common parent magma. Compositional variability within the new flow is compared to that of other recently documented individual flow sequences, and this comparison reveals a strong positive correlation of compositional variance with flow volumes spanning a range of >2 orders of magnitude. The geochemical heterogeneity in the North Gorda new flow probably reflects incomplete mixing of magmas generated from a heterogeneous mantle source or from slightly different melting conditions of a single source. The compositional variability, range in sample ages (up to 6 weeks) and range in active seismicity (4 weeks) imply that this relatively large flow was erupted over an interval of several weeks.  相似文献