排序方式： 共有42条查询结果，搜索用时 31 毫秒
1.
Song Jun Young Sim Youngjong Jang Jaewon Hong Won-Taek Yun Tae Sup 《Acta Geotechnica》2020,15(7):1967-1980
Acta Geotechnica - To resolve the environmental and sustainability issues from fugitive dust emission and conventional mitigation methods, multiple experiments were conducted to evaluate the... 相似文献
2.
Periodical algal blooms result in deposition and release of phosphorus (P) from the sediment into the water. Therefore, during seasonal changes when algal particles begin to settle to the bottom, understanding the behavior and distribution characteristics of the P in sediment is the most important key to manage the water quality of the Saemangeum Reservoir. In this study, the variation of water quality and sediment composition including chlorophyll-a (Chl-a) and P was investigated to determine the interaction between water and sediment. The study focused primarily on algal particle sedimentation that affects the P release and mineralization of sediment. The Chl-a concentration in water showed a sharp decline in October when the algae began to die in the fall, and afterward the concentration of chemical oxygen demand (COD) and total P (TP) in the sediment increased due to the sedimentation of decaying algal particles in November. During the same period of time, the readily bio-available P (RAP) in the sediment showed a drastic increase in the upper region where the Chl-a concentration of water was high. In sequence, the high RAP zone shifted from the upper region to the lower region in the early winter. The RAP shift was considered to be derived from the physical flow of the overlying water from which the decomposing algae settled on the surface of the sediment. The Saemangeum Reservoir was constructed recently; therefore, all the types of inorganic P fractions except soluble reactive phosphorus (SRP) that exist on the bottom surface of the lake and the marsh's sediment layer were not sufficient to significantly influence the overlying water. On the other hand, the released P from the algae was distinct and sensitive to the seasonal change. In conclusion, the algal particle sedimentation was important to control eutrophication rather than P release from the mineralized inorganic P of the sediment surface layer in the Seamangeum Reservoir. 相似文献
3.
Three-dimensional visualization of mission planning and control forthe NPS autonomous underwater vehicle 总被引：1，自引：0，他引：1
Zyda M.J. McGhee R.B. Kwak S. Nordman D.B. Rogers R.C. Marco D. 《Oceanic Engineering, IEEE Journal of》1990,15(3):217-221
The Naval Postgraduate School (NPS) is constructing a small autonomous underwater vehicle (AUV) with an onboard mission control computer. The mission controller software for this vehicle is a knowledge-based artificial intelligence (AI) system requiring thorough analysis and testing before the AUV is operational. The manner in which rapid prototyping of this software has been demonstrated by developing a controller code on a LISP machine and using an Ethernet link with a graphics workstation to simulate the controller's environment is discussed. The development of a testing simulator using a knowledge engineering environment (KEE) expert system shell that examines AUV controller subsystems and vehicle models before integrating them with the full AUV for its test environment missions is discussed. This AUV simulator utilizes an interactive mission planning control console and is fully autonomous once initial parameters are selected 相似文献
4.
Landslides and debris flows that occur around residential areas are considered, globally, as significant disasters that cause damage to human life and property. With terrain slope defining the flow characteristics of debris flows, flow depth, flow velocity, and impact force vary by time and distance. In particular, when a structure is located in the flow path of debris flows, the flow characteristics of debris flows vary by terrain slope and direction angle. To simulate the flow characteristics of these debris flows, the simulation results obtained by FLO-2D were analyzed with six-stage conditions for the research area. In the analysis, the flow depth, flow velocity, and impact force were estimated on the basis of the outlet of the research area in the presence and absence of structure(s) at certain distances. With this, the variation of the impact force in accordance with the variation of the flow depth of the debris flows was highly similar to the simulation results obtained by FLO-2D, when the correction index (α) of the suggested dynamic impact force equation was 0.3–0.4. There were sections where the estimated value of the impact force was overestimated near the outlet, and it was judged that the fixed values of the terrain factors (width, roughness coefficient, slope, etc.) caused the impact force to be overestimated. However, the correlation analysis showed that the correlation index was above the normal ranges in the suggested dynamic impact force equation for debris flows with the application of the terrain factors. 相似文献
5.
The occurrence of anthropogenic sinkholes in urban areas can lead to severe socioeconomic losses. A damaged underground sewer pipe is regarded as one of the primary causes of such a phenomenon. This study adopted the best subsets regression method to produce a logistic regression model that evaluates the susceptibility for sinkholes induced by damaged sewer pipes. The model was developed by analyzing the sewer pipe network as well as cases of sinkholes in Seoul, South Korea. Among numerous sewer pipe characteristics tested as explanatory variables, the length, age, elevation, burial depth, size, slope, and materials of the sewer pipe were found to influence the occurrence of sinkhole. The proposed model reasonably estimated the sinkhole susceptibility in the area studied, with an area value under the receiver-operating characteristics curve of 0.753. The proposed methodology will serve as a useful tool that can help local governments to choose a cavity inspection regime, and to prevent sinkholes induced by damaged sewer pipes. 相似文献
6.
Younghee Kwak Mathis Bloßfeld Ralf Schmid Detlef Angermann Michael Gerstl Manuela Seitz 《Journal of Geodesy》2018,92(9):1047-1061
The Celestial Reference System (CRS) is currently realized only by Very Long Baseline Interferometry (VLBI) because it is the space geodetic technique that enables observations in that frame. In contrast, the Terrestrial Reference System (TRS) is realized by means of the combination of four space geodetic techniques: Global Navigation Satellite System (GNSS), VLBI, Satellite Laser Ranging (SLR), and Doppler Orbitography and Radiopositioning Integrated by Satellite. The Earth orientation parameters (EOP) are the link between the two types of systems, CRS and TRS. The EOP series of the International Earth Rotation and Reference Systems Service were combined of specifically selected series from various analysis centers. Other EOP series were generated by a simultaneous estimation together with the TRF while the CRF was fixed. Those computation approaches entail inherent inconsistencies between TRF, EOP, and CRF, also because the input data sets are different. A combined normal equation (NEQ) system, which consists of all the parameters, i.e., TRF, EOP, and CRF, would overcome such an inconsistency. In this paper, we simultaneously estimate TRF, EOP, and CRF from an inter-technique combined NEQ using the latest GNSS, VLBI, and SLR data (2005–2015). The results show that the selection of local ties is most critical to the TRF. The combination of pole coordinates is beneficial for the CRF, whereas the combination of \(\varDelta \hbox {UT1}\) results in clear rotations of the estimated CRF. However, the standard deviations of the EOP and the CRF improve by the inter-technique combination which indicates the benefits of a common estimation of all parameters. It became evident that the common determination of TRF, EOP, and CRF systematically influences future ICRF computations at the level of several \(\upmu \)as. Moreover, the CRF is influenced by up to \(50~\upmu \)as if the station coordinates and EOP are dominated by the satellite techniques. 相似文献
7.
Teunis A. P. Kwak 《Contributions to Mineralogy and Petrology》1971,32(3):193-210
From considerations of relativeG-T surfaces inferred from publishedP-T data and the occurrence of replacement textures of Al2SiO5 polymorphs in rocks, the relative positions of curves representing the following equation in K+ —T — pH ispace on substituting Al2SiO5 different polymorphs are derived.3 Al2SiO5 + 3 SiO2 (quartz) + 2 K+ + 3 H2O 2 KAl2[AlSi3O10](OH)2 (muscovite)+ 2 H+. The curves are different because of the differentG-T values for the polymorphs which, in the field, is borne out by the observation that in a rock containing two or three Al2SiO5 polymorphs, in nearly all instances only one polymorph is replaced by white mica. Instances of textural relations showing the interpreted selective replacement of one Al2SiO5 polymorph by a white mica in the presence of one (or two) other Al2SiO5 polymorph(s) are cited both from the literature and various field examples. The selective replacement of kyanite if sillimanite and/or andalusite is/are present, and of andalusite if only sillimanite is present are interpreted to show that generally during the muscovitization reaction, the field of sillimanite in the above reaction (left hand side) at a particular pH (H+ concentration) and
is larger in K+ —T space than that of andalusite which in turn is larger than that of kyanite. Theoretically it is shown that variations to this can exist but the field evidence suggests these only occur under rare geological conditions. Although this is not totally conclusive, the selectiveness of the replacement is interpreted to show that the fluid was buffered with respect to K+ and H+ on or near the curve of the polymorph showing the lowest stability field until that polymorph is totally consumed, after which the fluid composition moves to the next lowest curve for the remaining polymorph(s) present in the rock. The alteration of more than one polymorph by an apparently simultaneous process of alteration is rare and usually occurs at a low grade of metamorphism. This is interpreted to show that the buffering reaction could not keep pace with the influx of fluid and change the composition of this fluid (in most cases). 相似文献
8.
Teunis A. P. Kwak 《Contributions to Mineralogy and Petrology》1970,26(3):199-224
This study is an attempt to understand anomalous distribution coefficient values in the light of the fact that many metamorphic
minerals are internally inhomogeneous. A number of models are proposed to show how the non-sytematic variation of distribution
coefficient values may be produced by partial re-equilibration (and/or reaction) of ions between minerals and which samples
would give the values most closely corresponding to those expected from the index minerals. It is suggested that the irregularity
of the distribution coefficients is due to chemical variations of the bulk chemistry, both from handspecimen to handspecimen
and in different parts of a single handspecimen. Samples from a field area containing the Staurolite-Quartz, Kyanite-Muscovite
and Sillimanite-K feldspar subfacies of the Almandine Amphibolite facies, located near Sudbury, Canada, were submitted to
mineral separation and analysis as well as electronmicroprobe analysis. Despite the fact that much scatter occurs between
distribution coefficients due to partial re-equilibration, the values of Mg and Fe+2 of D
biotite/Garnet decrease and Mn and Ca increase recognizably across the area. Generally, the model(s) proposed seem applicable to the field
data presented. 相似文献
9.
The nomenclature of replacement deposits is reviewed in terms of two processes, namely those involving the reaction between: (a) carbonate and siliceous rocks and (b) carbonate and unusual solutions, commonly, but not always, related to granitoids. ‘Wrigglite’ skarn is an example of a replacement deposit produced by process (b). It is highly characteristic rock consisting of alternating light layers of fluorite ± other F‐rich minerals and dark layers composed usually of Fe‐rich minerals or, rarely, Be‐rich minerals. The layers formed parallel or sub‐parallel to fractures, which are now veins, by a Leisegang‐type diffusion process. Repeated periods of fracturing, with growth away from sequentially produced fractures, produced an apparently chaotic ‘wrigglite’ skarn. The skarn is invariably enriched in Fe, F, Sn, Be, W, Bi and Zn. For ‘wrigglite’ to form, fluorine must be greater than 9 weight percent in the rock, and the intrusion of a Sn‐leucogranite ('A‐type') high into the crust is needed. Recognition of ‘wrigglite’ is important because (1) in some areas it is an ore of Sn (Mt Bischoff, Tas.), rare earth metals (Bayan Obo, China) or Be (Lost River, Alaska); (2) it indicates a high‐level environment of emplacement of a Sn‐granitoid; and (3) it indicates clearly that intricate layering can be produced by a diffusional process and not only by primary sedimentation. 相似文献
10.
In the context of carbon capture and storage, deep underground injection of CO2 induces the geomechanical changes within and around the injection zone and their impact on CO2 storage security should be evaluated. In this study, we conduct coupled multiphase fluid flow and geomechanical modeling to investigate such geomechanical changes, focusing on probabilistic analysis of injection-induced fracture reactivation (such as shear slip) that could lead to enhanced permeability and CO2 migration across otherwise low-permeability caprock formations. Fracture reactivation in terms of shear slip was analyzed by implicitly considering the fracture orientations generated using the Latin hypercube sampling method, in one case using published fracture statistics from a CO2 storage site. The analysis was conducted by a coupled multiphase fluid flow and geomechanical simulation to first calculate the three-dimensional stress evolution during a hypothetical CO2 injection operation and then evaluate the probability of shear slip considering the statistical fracture distribution and a Coulomb failure analysis. We evaluate the probability of shear slip at different points within the injection zone and in the caprock just above the injection zone and relate this to the potential for opening of new flow paths through the caprock. Our analysis showed that a reverse faulting stress field would be most favorable for avoiding fracture shear reactivation, but site-specific analyses will be required because of strong dependency of the local stress field and fracture orientations. 相似文献