Channel stability in steep gravel–cobble streams is controlled by the coarse tail of the bed material distribution     

Brett C. Eaton  Lucy G. MacKenzie  William H. Booker 《地球表面变化过程与地形》2020,45(14):3639-3652

Researchers have associated channel-forming flows with reach-average shear stresses close to the entrainment threshold for the surface D₅₀ . We conducted experiments using a model of a generic steep, gravel–cobble stream to test this association. Our results suggest that channel-forming flows fully mobilize the D₅₀ , and produce shear stresses close to the entrainment threshold for the largest grains in the bed. The channel dimensions were set by flows capable of mobilizing between 85% and 90% of the bed surface, which produced a brief period of lateral instability lasting about 1 h, followed by a prolonged period of relative stability during which modest adjustments occurred, but during which the reach-average hydraulics remained about the same. The adjustments during the unstable phase of the experiments are characterized by rapid bank erosion, extensive deposits on the channel bed and a restructuring of the major morphologic elements of the stream. The adjustments during the stable phase of the experiments involved barform migration and bed surface coarsening but did not appreciably modify the physical template established by the end of the unstable phase. The behaviour we observed is not consistent with the concept of a dynamic equilibrium associated with a formative flow that is just capable of entraining the bed surface D₅₀ . Instead, it suggests that rapid adjustments occur once a stability threshold is exceeded, which creates a template that constrains channel activity until another event drives the system across the stability threshold, and re-sets the template. While we believe that it is probably too simplistic to associate a channel-forming discharge with the entrainment threshold for a single grain size, our results suggest that the D₉₅ is a more logical choice than the D₅₀ © 2020 John Wiley & Sons, Ltd.  相似文献   

Primitive Ordovician (Floian) echinoderms from Sandu,Guizhou Province,South China,and their significance     

Christopher R. C. Paul  Stephen K. Donovan  Lucy A. Muir  Joseph P. Botting  Jih‐Pai Lin  Yuandong Zhang 《Geological Journal》2016,51(1):143-156

Pelmatozoans diversified primarily during the Middle and Late Ordovician Period, with Early Ordovician records being much more limited, resulting in many gaps in our knowledge of the early stages of their diversification. Dissociated pelmatozoan ossicles have been found abundantly in one section in the Tonggao Formation (Tetragraptus approximatus Biozone, Floian, Early Ordovician). Most of the ossicles are thecal plates and stem ossicles from hemicosmitoid and glyptocystitoid cystoids. Thecal plates of ‘Cheirocrinus’ sp., Polycosmites sp., and other plates of uncertain affinity are described. A different ossicle type, Pentagonopentagonalis (col.), may represent crinoid remains; this would be one of the earliest occurrences of the class. The thecal ossicles and columnals are all considered, as both sets of data are desirable to determine the most complete estimate of generic diversity. The echinoderm ossicles may have been transported in from shallower water palaeoenvironments and clusters of ossicles may represent coprolites or regurgitates. Estimates of Early Ordovician palaeogeography that place this site at 30°S or near the palaeoequator are supported by the physiological requirements of the primitive echinoderms described herein. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

The influence of volcanological and sedimentological processes on diamond grade distribution in kimberlites: examples from the EKATI Diamond Mine,NWT, Canada     

Lucy A. Porritt  R. A. F. Cas  L. Ailleres  P. Oshust 《Bulletin of Volcanology》2011,73(8):1085-1105

The distribution of diamonds within individual kimberlite pipes is poorly documented in the public domain due to the proprietary nature of the data. The study of the diamond distribution within two pipes, Fox and Koala, from the EKATI Diamond Mine, NWT, Canada, in conjunction with detailed facies models has shown several distinct relationships of deposit type and grade distribution. In both pipes, the lithological facies represent grade units which can be distinguished from each other in terms of relative size and abundance of diamonds. A positive relationship between olivine grain size and abundance with diamond size and abundance is observed, indicating that sorting of fragmental kimberlites influences diamond distribution. Though surface geological processes do not control the diamond potential of the erupting magma, they can be responsible for concentrating diamonds into economically significant proportions. A good understanding of the eruption, transport and depositional processes responsible for the individual lithological units and the diamond distribution within them is important for successful resource estimation. This may lead to recognition of areas suitable for selective mining, making a marginal deposit economic.  相似文献   

Stormflow concentration–discharge dynamics of suspended sediment and dissolved phosphorus in an agricultural watershed     

Lucy A. Rose  Diana L. Karwan 《水文研究》2021,35(12):e14455

Concentration–discharge (C-Q) relationships are an effective tool for identifying watershed biogeochemical source and transport dynamics over short and long timescales. We examined stormflow C-Q, hysteresis, and flushing patterns of total suspended sediment (TSS) and soluble reactive phosphorus (SRP) in two stream reaches of a severely impaired agricultural watershed in northeastern Wisconsin, USA. The upper watershed reach—draining a relatively flat, row crop-dominated contributing area—showed predominantly anti-clockwise TSS hysteresis during storms, suggesting that particulate materials were mobilized more from distal upland sources than near- and in-channel areas. In contrast, the incised lower watershed reach produced strong TSS flushing responses on the rising limb of storm hydrographs and clockwise hysteresis, signalling rapid mobilization of near- and in-channel materials with increasing event flows. C-Q relationships for SRP showed complex patterns in both the upper and lower reaches, demonstrating largely non-linear chemodynamic C-Q behaviour during events. As with TSS, anti-clockwise SRP hysteresis in the upper reach suggested a delay in the hydrologic connectivity between SRP sources and the stream, with highly variable SRP concentrations during some events. A broad range of clockwise, anti-clockwise, and complex SRP hysteresis patterns occurred in the lower watershed, possibly influenced by in-channel legacy P stores and connection to tile drainage networks in the lower watershed area. Total suspended sediment and SRP responses were also strongly related to precipitation event characteristics including antecedent precipitation, recovery period, and precipitation intensity, highlighting the complexity of stormflow sediment and phosphorus responses in this severely impaired agricultural stream.  相似文献   

Stormflow dynamics and loads of Escherichia coli in a large mixed land use catchment     

Lucy A. McKergow  Robert J. Davies‐Colley 《水文研究》2010,24(3):276-289

Storm events are major transporters of faecal microbial contaminants, but few studies have reported storm loads or concentration dynamics in relation to discharge or other pollutants, notably fine sediment. Episodically, high loads of faecal contamination during storm flows impact downstream uses of water bodies, particularly contact recreation and shellfish harvesting. We examined the storm dynamics of Escherichia coli, turbidity and discharge in the mixed land use Motueka catchment (2047 km²; 60% forest and 19% pasture) to gain insights into E. coli sources and transport. We also explored different approaches for calculating E. coli loads. Discharge and field turbidity were recorded continuously, and E. coli concentrations were sampled during events, over a 13‐month period near the mouth of the Motueka River. E. coli loads were estimated by interpolation, averaging estimators and by using linear regression with smearing correction of the log‐transformed variables: discharge, turbidity, and both turbidity and discharge. The annual E. coli load was dominated (～98%) by export during events. Comparison of monthly monitoring with the intensive storm monitoring campaign suggests that simple stratification of the sampling into storm and baseflow would greatly improve export estimates. E. coli peak concentrations always preceded discharge and turbidity peaks (which had similar timing). Turbidity can be a useful surrogate for faecal microbes in smaller catchments, but in the Motueka turbidity was no better for predicting E. coli concentration than discharge. Runoff from grazed pasture and direct deposition from livestock are probably the ultimate E. coli sources in the Motueka catchment. However, in‐channel stores seem to dominate E. coli dynamics during events and account for the typical feature of bacterial concentrations peaking ahead of discharge and turbidity. This study demonstrates the importance of storm events to faecal microbial loads and shows that E. coli concentration dynamics may contrast with those of turbidity. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

Defining the Potential of Nanoscale Re‐Os Isotope Systematics Using Atom Probe Microscopy          下载免费PDF全文

Luke Daly  Phil A. Bland  Svetlana Tessalina  David W. Saxey  Steven M. Reddy  Denis Fougerouse  William D.A. Rickard  Lucy V. Forman  Alexandre La Fontaine  Julie M. Cairney  Simon P. Ringer  Bruce F. Schaefer  Daniel Schwander 《Geostandards and Geoanalytical Research》2018,42(3):279-299

Atom probe microscopy (APM) is a relatively new in situ tool for measuring isotope fractions from nanoscale volumes (< 0.01 μm³). We calculate the theoretical detectable difference of an isotope ratio measurement result from APM using counting statistics of a hypothetical data set to be ± 4δ or 0.4% (2s). However, challenges associated with APM measurements (e.g., peak ranging, hydride formation and isobaric interferences), result in larger uncertainties if not properly accounted for. We evaluate these factors for Re‐Os isotope ratio measurements by comparing APM and negative thermal ionisation mass spectrometry (N‐TIMS) measurement results of pure Os, pure Re, and two synthetic Re‐Os‐bearing alloys from Schwander et al. (2015, Meteoritics and Planetary Science, 50, 893) [the original metal alloy (HSE) and alloys produced by heating HSE within silicate liquid (SYN)]. From this, we propose a current best practice for APM Re‐Os isotope ratio measurements. Using this refined approach, mean APM and N‐TIMS ¹⁸⁷Os/¹⁸⁹Os measurement results agree within 0.05% and 2s (pure Os), 0.6–2% and 2s (SYN) and 5–10% (HSE). The good agreement of N‐TIMS and APM ¹⁸⁷Os/¹⁸⁹Os measurements confirms that APM can extract robust isotope ratios. Therefore, this approach permits nanoscale isotope measurements of Os‐bearing alloys using the Re‐Os geochronometer that could not be measured by conventional measurement principles.  相似文献   

Mineralogy and thermal properties of V-type Asteroid 956 Elisa: Evidence for diogenitic material from the Spitzer IRS (5-35 μm) spectrum     

Lucy F. Lim  Joshua P. Emery 《Icarus》2011,213(2):510-523

We present the thermal infrared (5-35 μm) spectrum of 956 Elisa as measured by the Spitzer Infrared Spectrograph (“IRS”; Houck, J.R. et al. [2004]. Astrophys. J. Suppl. 154, 18-24) together with new groundbased lightcurve data and near-IR spectra. From the visible lightcurve photometry, we determine a rotation period of 16.494 ± 0.001 h, identify the rotational phase of the Spitzer observations, and estimate the visible absolute magnitude (H_V) at that rotational phase to be 12.58 ± 0.04. From radiometric analysis of the thermal flux spectrum, we find that at the time of observation 956 Elisa had a projected radius of 5.3 ± 0.4 km with a visible albedo p_V = 0.142 ± 0.022, significantly lower than that of the prototype V-type asteroid, 4 Vesta. (This corresponds to a radius of 5.2 ± 0.4 km at lightcurve mean.) Analysis with the standard thermal model (STM) results in a sub-solar temperature of 292.3 ±  2.8 K and beaming parameter η = 1.16 ± 0.05. Thermophysical modeling places a lower limit of on the thermal inertia of the asteroid’s surface layer (if the surface is very smooth) but more likely values fall between 30 and depending on the sense of rotation.The emissivity spectrum, calculated by dividing the measured thermal flux spectrum by the modeled thermal continuum, exhibits mineralogically interpretable spectral features within the 9-12 μm reststrahlen band, the 15-16.5 μm Si-O-Si stretching region, and the 16-25 μm reststrahlen region that are consistent with pyroxene of diogenitic composition: extant diogenitic pyroxenes fall within the narrow compositional range Wo_2±1En_74±2Fs_24±1. Spectral deconvolution of the 9-12 μm reststrahlen features indicates that up to ≈20% olivine may also be present, suggesting an olivine-diogenite-like mineralogy. The mid-IR spectrum is inconsistent with non-cumulate eucrite as the major component on the surface of 956 Elisa, although cumulate eucrite material may be present at abundances lower than that of the diogenite component.Analysis of new near-IR spectra of 956 Elisa with the Modified Gaussian Model (MGM; Sunshine, J.M., Pieters, C.M., Pratt, S.F. [1990]. J. Geophys. Res. 95 (May), 6955-6966) results in two pyroxene compositions: 75% magnesian low-Ca pyroxene and 25% high-Ca pyroxene. High-Ca pyroxene is not evident in the mid-IR data, but may belong to a component that is underrepresented in the mid-IR spectrum either because of its spatial distribution on the asteroid or because of its particle size. High-Ca pyroxenes that occur as exsolution lamellae may also be more evident spectrally in the NIR than in the mid-IR. In any case, we find that the mid-IR spectrum of 956 Elisa is dominated by emission from material of diogenite-like composition, which has very rarely been observed among asteroids.  相似文献   

利用大地电磁资料对玄武岩成像的可行性     

Dhananjai Pandey　Lucy MacGregor　Martin Sinha　Satish Singh 《应用地球物理》2008,5(1):74-82

The magnetotelluric （MT） method has been among the favorite supporting tools for seismic imaging of sub-salt and sub-basalt targets. In this paper we present an example from Kachchh, India （where basaltic rocks overlie Mesozoic sedimentary rocks）, and discuss the feasibility of using MT method as an exploration tool in this geological setting. Our results highlight the difference in magnetotelluric response caused by the thin intrabasalt layering. The key issue addressed in this paper is what MT can and cannot provide in such geological settings. First, we compute apparent resistivity and phase response curves using representative resistivity-depth models and borehole data from the study area. Later, we compare these results to assess the plausibility of using MT to image the sub-volcanic sediments at Kachchh. Finally, we substantiate our discussion through one-dimensional inversion of the field observed MT data from this region that exhibits poor sensitivity of MT for thin basalt layers.  相似文献   

Ocean coast effect on magnetotelluric data: a case study from Kachchh, India     

Dhananjai Pandey  Martin Sinha  Lucy MacGregor  Satish Singh 《Marine Geophysical Researches》2008,29(3):185-193

The effects of the ocean coast on magnetotelluric (MT) data have been studied and results are described in this article. MT soundings from various sites along coastal plains of Kachchh were acquired where volcanic rocks overlie Mesozoic sediments having potential resource prospects. The region of our study lies in the proximity of Gulf of Kachchh and Arabian Sea. This article describes the effects the presence of a conductive body on the acquired MT data. With the help of synthetic MT modelling and induction arrows we demonstrate the influence of shallow conductive body on the MT data. The modelling results when compared to the field observations show that much of the high frequencies are unaffected by the coast, however low frequencies of the data do seem to be distorted by onshore–offshore resistivity contrasts. The least affect on high frequencies can be attributed to very shallow water depth as well as to the fact that the onshore–offshore resistivity contrasts are not large enough to influence the high frequency data badly. The results presented here report for the first time the effect of the coast on the analysis on MT data from Kachchh. Due to several academic as well as industrial onshore–offshore MT experiments presently being carried out to explore its hydrocarbon potential, our results have an important bearing on designing and acquisition of future MT surveys in this region.  相似文献   

The profitability of the artisanal galician fleet     

M. Dolores Garza-Gil  Lucy Amigo-Dobaño 《Marine Policy》2008

A large artisanal fleet made up of small-sized vessels fishes along the Galician coastline using passive gear and traps. The aim of this study is to analyse the economic profitability of this fleet in the last 5 years by looking at the average rate of return on the vessel and the investment payback period. The results show a slight drop in the return per vessel half-way through the period studied caused by the effects of the Prestige oil spill, to quickly recover over the following 2 years. Considerably high profitability rates from fishing activity were observed, especially in the second half of the period, and slightly lower payback periods, in general, than the average life of a standard fleet vessel.  相似文献