Separation of magnetic anomalies into induced and remanent magnetization contributions     

Jamaledin Baniamerian  Shuang Liu  Xiangyun Hu  Maurizio Fedi  Mahak Singh Chauhan  Mahmoud Ahmed Abbas 《Geophysical Prospecting》2020,68(7):2320-2342

Inversion of magnetic data is complicated by the presence of remanent magnetization, and it provides limited information about the magnetic source because of the insufficiency of data and constraint information. We propose a Fourier domain transformation allowing the separation of magnetic anomalies into the components caused by induced and remanent magnetizations. The approach is based on the hypothesis that each isolated source is homogeneous with a uniform and specific Koenigsberger ratio. The distributions of susceptibility and remanent magnetization are subsequently recovered from the separated anomalies. Anomaly components, susceptibility distribution and distribution of the remanent and total magnetization vectors (direction and intensity) can be achieved through the processing of the anomaly components. The proposed method therefore provides a procedure to test the hypotheses about target source and magnetic field, by verifying these models based on available information or a priori information from geology. We test our methods using synthetic and real data acquired over the Zhangfushan iron-ore deposit and the Yeshan polymetallic deposit in eastern China. All the tests yield favourable results and the obtained models are helpful for the geological interpretation.  相似文献   

Late Cretaceous–Early Paleogene tectonic events at Farafra-Abu Minqar Stretch,Western Desert,Egypt: results from calcareous plankton     

Mahmoud Faris  Nageh A. Obaidalla  Amr A. Metwally  Abdelhamid M. Salman  Amr S. Zaky 《Arabian Journal of Geosciences》2018,11(15):429

This work depends on integrated high-resolution calcareous plankton nannofossil and foraminiferal biostratigraphic analyses for three Upper Cretaceous-Lower Paleogene successions at Farafra-Abu Minqar area, Western Desert, Egypt. These sections are distributed in a north-south geologic profile as follows: El Aqabat, North Gunna, and Abu Minqar. Lithostratigraphically, four formations are recorded in the study area, namely, Khoman (at base), Dakhla, Tarawan, and Esna (at top). In the north at El Aqabat section, Khoman Formation (carbonate facies) is only represented which changes partially toward the south to Dakhla Formation (siliciclastic facies). In the extreme south at Abu Minqar section, it changes completely into siliciclastic facies of Dakhla Formation. Biostratigraphically, seven calcareous nannofossil and eleven planktonic foraminiferal zones represent the Late Cretaceous-Early Paleogene are identified. Based on the occurrence or missing of these zones accompanied with the field criteria resulted in detecting four tectonic events. These tectonic events took place at the Cretaceous/Paleogene (K/Pg), the Danian/Selandian (D/S), the Selandian/Thanetian (S/T), and the Paleocene/Eocene (P/E) boundaries. These tectonic events are related to the impact of the Syrian Arc System. Four sequence boundaries (SB1, SB2, SB3, and SB4) are defined in the Late Cretaceous-Early Paleogene sequence in the Farafra-Abu Minqar area.  相似文献   

Analysis of physical factors of climate and bioclimate and their effects on almonds production to increase the economy in Hebron area of Palestine     

Jehad Mahmoud Hussein Ighbareyeh  Eusebio Cano Carmona  Ana Cano Ortiz  Asma Abdel-Rahim Ahmed Suliemieh  Mohammed Mahmoud Hussein Ighbareyeh  Abed Al-Qader Mohammed Daraweesh 《Arabian Journal of Geosciences》2018,11(21):683

For the 1993–2009 period, we analyzed the relationship between almond yield and three climatic variables (mean annual temperature, soil water reserve, and precipitation), and four bioclimatic variables (annual ombrothermic index, water deficit, simple continentality index, and compensated thermicity index), for one major Hebron crop (soft and hard almonds). Moreover, we obtained data almond production from the Palestinian Central Bureau of Statistics, while the climate data from the Palestinian meteorological station during the study period from 1993 to 2009, and analysis is it by using bioclimatic classification of the Earth of Salvador Rivas-Martinez to study the relationship between the almond yield and climate and bioclimate factors (variables). The climatic and bioclimate variables of greatest importance to almond were used to develop regressions analysis relating yield to climatic conditions. Hebron was positively affected by annual ombrothermic index, simple continentality index, precipitation, water soil reserve, and mean annual temperature, but negatively affected by water deficit, with a large proportion of the variance explained by axis F1 (72.48%), F2 (22.38%), and axes F1and F2 (94. 86%). However, in order to produce a high amount of almonds and quality, it can be grown in the regions of the mesomediterranean region, with the value of annual ombrothemic index more than 3, compensated thermicity index between 220/220 to 350/350, simple continentality index between 14 and 20, and in areas where the average annual temperature is between 15 and 20 °C.  相似文献   

Provenance,weathering, and paleoenvironment of the Upper Cretaceous Duwi black shales,Aswan Governorate,Egypt     

Samir M. Zaid  Oussama A. EL-Badry  Adel M. Akarish  Mahmoud A. Mohamed 《Arabian Journal of Geosciences》2018,11(7):147

The mineralogy and geochemistry of the Upper Cretaceous Duwi black shales of Nile Valley district, Aswan Governorate, Egypt, have been investigated to identify the source rock characteristics, paleoweathering, and paleoenvironment of the source area. The Duwi Formation consists mainly of phosphorite and black shales and is subdivided into three members. The lower and upper members composed mainly of phosphorite beds intercalated with thin lenses of gray shales, while the middle member is mainly composed of gray shale, cracked, and filled with gypsum. Mineralogically, the Duwi black shales consist mainly of smectite and kaolinite. The non-clay minerals are dominated by quartz, calcite, phosphate, dolomite, feldspar, with little gypsum, anhydrite, iron oxides, and pyrite. Based on the CIA, PIA, and CIW values (average?=?84, 94, 95, respectively), it can be concluded that the litho-components of the studied shales were subjected to intense chemical weathering and reflect warm/humid climatic conditions in the depositional basin. The provenance discrimination diagram indicates that the nature of the source rocks probably was mainly intermediate and mafic igneous sources with subordinate recycled sedimentary rocks (Nubia Formation). Geochemical characteristics indicate that the Duwi black shales in Nile Valley district were deposited under anoxic reducing marine environments.  相似文献   

Selecting Equivalent Strength for Intact Rocks in Heterogeneous Rock Masses     

Mahmoud Behnia  Ahmad Rahmani Shahraki  Zabihallah Moradian 《Geotechnical and Geological Engineering》2018,36(4):1975-1989

Many surface and underground structures are constructed in heterogeneous rock formations. These formations have a combination of weak and strong rock layers. Due to the alternation of the weak and strong layers, selecting the equivalent and appropriate geomechanical parameters for these formations is challenging. One of these problems is choosing the equivalent strength (i.e., uniaxial compressive strength) of intact rock for a group of rocks. Based on the volume of weak and strong parts and their strength, the equivalent strength of heterogeneous rocks changes. Marinos and Hoek (Bull Eng Geol Environ 60(2):85–92, 2001) presented the “weighted average method” for defining the uniaxial compressive strength (UCS) of heterogeneous rock masses based on the volume of weak and strong parts. Laubscher (1977) used the volume ratio of the strength of a weak part to a strong part (UCS weak/UCS strong) to determine the equivalent strength. In this study, the two methods are compared and their validity is evaluated by experimental data and numerical analyses. The geomechanical parameters of two heterogeneous formations (Aghajari and Lahbari) in the west of Iran were estimated using these methods. The results of the present study obtained through numerical analyses using particle flow code are compared with those of previous studies and discussed. Laboratory and numerical results show UCS decrease and approach to weak strength with an increasing in volume of weak part. When strength ratio of strong to weak rock increase, equivalent strength decrease more severely. The findings show that Laubscher’s method gives more appropriate results than the weighted average method.  相似文献   

Life-cycle cost and sustainability analysis of light-frame wood residential communities exposed to tornados     

Adhikari  Pramodit  Mahmoud  Hussam N.  Ellingwood  Bruce R. 《Natural Hazards》2021,109(1):523-544

Natural Hazards - Tornadoes pose a significant threat to residential communities, causing enormous physical damage and losses to their social fabric. The dominant type of single-family residential...  相似文献   

Update earthquake risk assessment in Cairo,Egypt     

Ahmed Badawy  Ibrahim Korrat  Mahmoud El-Hadidy  Hanan Gaber 《Journal of Seismology》2017,21(4):571-589

The Cairo earthquake (12 October 1992; m _b  = 5.8) is still and after 25 years one of the most painful events and is dug into the Egyptians memory. This is not due to the strength of the earthquake but due to the accompanied losses and damages (561 dead; 10,000 injured and 3000 families lost their homes). Nowadays, the most frequent and important question that should rise is “what if this earthquake is repeated today.” In this study, we simulate the same size earthquake (12 October 1992) ground motion shaking and the consequent social-economic impacts in terms of losses and damages. Seismic hazard, earthquake catalogs, soil types, demographics, and building inventories were integrated into HAZUS-MH to produce a sound earthquake risk assessment for Cairo including economic and social losses. Generally, the earthquake risk assessment clearly indicates that “the losses and damages may be increased twice or three times” in Cairo compared to the 1992 earthquake. The earthquake risk profile reveals that five districts (Al-Sahel, El Basateen, Dar El-Salam, Gharb, and Madinat Nasr sharq) lie in high seismic risks, and three districts (Manshiyat Naser, El-Waily, and Wassat (center)) are in low seismic risk level. Moreover, the building damage estimations reflect that Gharb is the highest vulnerable district. The analysis shows that the Cairo urban area faces high risk. Deteriorating buildings and infrastructure make the city particularly vulnerable to earthquake risks. For instance, more than 90 % of the estimated buildings damages are concentrated within the most densely populated (El Basateen, Dar El-Salam, Gharb, and Madinat Nasr Gharb) districts. Moreover, about 75 % of casualties are in the same districts. Actually, an earthquake risk assessment for Cairo represents a crucial application of the HAZUS earthquake loss estimation model for risk management. Finally, for mitigation, risk reduction, and to improve the seismic performance of structures and assure life safety and collapse prevention in future earthquakes, a five-step road map has been purposed.  相似文献   

Geodynamic Evolution of Northeastern Tunisia During the Maastrichtian–Paleocene Time: Insights from Integrated Seismic Stratigraphic Analysis     

Oussama Abidi  Mohamed Hédi Inoubli  Kawthar Sebei  Adnen Amiri  Haifa Boussiga  Imen Hamdi Nasr  Abdelhamid Ben Salem  Mahmoud Elabed 《Surveys in Geophysics》2017,38(3):617-649

The Maastrichtian–Paleocene El Haria formation was studied and defined in Tunisia on the basis of outcrops and borehole data; few studies were interested in its three-dimensional extent. In this paper, the El Haria formation is reviewed in the context of a tectono-stratigraphic interval using an integrated seismic stratigraphic analysis based on borehole lithology logs, electrical well logging, well shots, vertical seismic profiles and post-stack surface data. Seismic analysis benefits from appropriate calibration with borehole data, conventional interpretation, velocity mapping, seismic attributes and post-stack model-based inversion. The applied methodology proved to be powerful for charactering the marly Maastrichtian–Paleocene interval of the El Haria formation. Migrated seismic sections together with borehole measurements are used to detail the three-dimensional changes in thickness, facies and depositional environment in the Cap Bon and Gulf of Hammamet regions during the Maastrichtian–Paleocene time. Furthermore, dating based on their microfossil content divulges local and multiple internal hiatuses within the El Haria formation which are related to the geodynamic evolution of the depositional floor since the Campanian stage. Interpreted seismic sections display concordance, unconformities, pinchouts, sedimentary gaps, incised valleys and syn-sedimentary normal faulting. Based on the seismic reflection geometry and terminations, seven sequences are delineated. These sequences are related to base-level changes as the combination of depositional floor paleo-topography, tectonic forces, subsidence and the developed accommodation space. These factors controlled the occurrence of the various parts of the Maastrichtian–Paleocene interval. Detailed examinations of these deposits together with the analysis of the structural deformation at different time periods allowed us to obtain a better understanding of the sediment architecture in depth and the delineation of the geodynamic evolution of the region.  相似文献   

Erratum to: Elastic properties of six silicate garnet end members from accurate ab initio simulations     

Alessandro Erba  Agnes Mahmoud  Roberto Orlando  Roberto Dovesi 《Physics and Chemistry of Minerals》2014,41(2):161-162

  相似文献   

Application of two fuzzy models using knowledge-based and linear aggregation approaches to identifying flooding-prone areas in Tehran     

Rezaei  Mahmoud  Amiraslani  Farshad  Samani  Najmeh Neysani  Alavipanah  Kazem 《Natural Hazards》2020,100(1):363-385

Flooding is one of the most problematic natural events affecting urban areas. In this regard, developing flooding models plays a crucial role in reducing flood-induced losses and assists city managers to determine flooding-prone areas (FPAs). The aim of this study is to investigate on the prediction capability of fuzzy analytical hierarchy process (FAHP) and Mamdani fuzzy inference system (MFIS) methods as two completely and semi-knowledge-based models to identify FPAs in Tehran, Iran. Six flooding conditioning factors including density of channel, distance from channel, land use, elevation, slope, and water discharge were extracted from various geo-spatial datasets. A total of 62 flooding locations were identified in the study area based on the existing reports and field surveys. Of these, 44 (70%) floods were randomly selected as training data and the remaining 18 (30%) cases were used for the validation purposes. After the data preparation step, data were processed by means of two statistical (FAHP) and soft computing (MFIS) methods. Unlike most statistical and soft computing approaches which use flooding inventory data for both training and evaluation of models, only conditioning factor was involved in data processing and inventory data were used in the current study to assess models prediction accuracy. Also, the efficiency of two approaches was evaluated by pixel matching (PM) and area under curve to validate the prediction capability of models. The prediction rate for MFIS and FAHP was 89% and 84%, respectively. Moreover, according to the results obtained from PM, it was found out that about 90% of known flooding locations fell in high-risk areas, whereas it was 83% for FAHP, indicating that flooding susceptibility map of MFIS has higher performance.

  相似文献