排序方式： 共有23条查询结果，搜索用时 843 毫秒
1.
Standing stocks and production rates of phytoplankton and planktonic copepods in the Inland Sea of Japan 总被引：1，自引：0，他引：1
Standing stocks and production rates of phytoplankton and planktonic copepods were investigated at 15 stations in the Inland Sea of Japan during four cruises in October–November 1979, January, April and June 1980. The overall mean of phytoplankton biomass was relatively constant during the study period, ranging from 2.3 mg chl.a m–3 in April to 3.6 mg chl.a m–3 in October–November. Primary production was low in January (mean: 90 mg C m–2 d–1), but higher than 375 mg C m–2 d–1 on the other occasions. Integrated annual primary production was 122 g C m–2 yr–1. In terms of carbon weight,Paracalanus parvus was the most important copepod species. The variation of the mean copepod biomass (range: 7.6 mg C m–3 in April to 20.2 mg C m–3 in June) was smaller than that of copepod production, which was estimated by the Ikeda-Motoda's physiological method. Copepod producion was low in cold seasons (0.6 and 0.9 mg C m–3 d–1 in January and April, respectively), and increased, following the elevation of primary production, to 4.9 mg C m–3 d–1 in June. Annual copepod production was 33.7 g C m–2 yr–1, of which herbivore (secondary) production was 26.4 g C m–2 yr–1 (21.7% of primary production). The ratios of pelagic planktivorous fish catch and total fish catch to the primary production were 0.82 and 1.8%, respectively, indicating very high efficiency in exploiting fishery resources in the Inland Sea of Japan. 相似文献
2.
-- As a first step toward establishing a standard earthquake cycle model in Japan, we simulate the crustal deformation during the past 100 years in northeast Japan, using a 3-D FEM based on the kinematic model. Then, we compare the computed results with the observed long-term leveling data and the recent GPS data. On the whole, although the effect of the subducting PAC is dominant, coseismic deformation of the interplate earthquakes can be clearly seen in the inland. Moreover, the postseismic deformation of the earthquakes due to the viscoelastic upper mantle seriously affects the inland movements, and continues for a few decades. Our modeling, including the effects of the interplate earthquakes and the three-dimensional viscoelastic inhomogeneity, reasonably explains the observed movement. Finally, we stress that the viscoelastic effect should be taken into consideration in the analyses, even if no earthquakes occur in the analyzed period. 相似文献
3.
We investigated the upper mantle anelastic structure beneath the northern Philippine Sea region, including the Izu-Bonin subduction zone and the Shikoku Basin. We used regional waveform data from 69 events in the Pacific and the Philippine Sea slabs, recorded on F-net and J-array network broadband stations in western Japan. Using the S–P phase pair method, we obtained differential attenuation factors, δt*, which represent the relative whole path Q. We conducted a tomographic inversion using 978 δt* values to invert for a fine-scale (50–100 km) three-dimensional anelastic structure.
The results shows two high-Q regions (QP>1000) which are consistent with the locations of the Pacific and the Philippine Sea slabs. Also there is a low-Q (QP110) area extending to the deeper parts (350–400 km) of the model just beneath the old spreading center and the Kinan Seamount Chain in the Shikoku Basin. A small depth dependence of the laterally averaged QP was found, with values of 266 (0–250 km), 301 (250–400 km), and 413 (400–500 km). 相似文献
4.
Naotaka Tomioka Takuo Okuchi Narangoo Purevjav Jun Abe Stefanus Harjo 《Physics and Chemistry of Minerals》2016,43(4):267-275
Hydrogen site positions and occupancy in the crystal structure of dense hydrous magnesium silicate (DHMS) phase E were determined for the first time by pulsed neutron powder diffraction. A fully deuterated pure phase E powder sample, which had space group \(R\overline{3} m\) and lattice parameters of a = 2.97065(8) Å and c = 13.9033(4) Å, was synthesized at 15 GPa and 1100 °C. Through quantitative evaluation of refined structure parameters obtained with sufficient spatial resolution and very high signal-to-background ratio, we conclude that the O–D dipoles in the refined phase E structure are tilted by 24° from the direction normal to the layers of edge-shared MgO6 octahedra (octahedral layers). The tilted dipole structure of phase E is in remarkable contrast to that of brucite, Mg(OH)2, which has dipoles exactly normal to the octahedral layer. This contrast exists because the O–Si–O bonding unique in the phase E structure connects two adjacent octahedral layers and thereby reduces the interlayer O···O distance. This shrinkage of the interlayer distance induces the tilting of the O–D dipole and also generates unique O–D···O hydrogen bonding connecting all the layers in the phase E structure. 相似文献
5.
Wataru Takahashi Hiroshi Kawamura Takuo Omura Ken Furuya 《Journal of Oceanography》2009,65(5):647-656
A multi-spectral classification scheme is proposed to identify water with red tide(s) using satellite ocean color imagery
obtained by the Sea-viewing Wide Field-of-view Sensor (SeaWiFS). The study area was the eastern Seto Inland Sea in Japan,
where serious red tides frequently occur. “Background Ocean Colors” (BOCs hereafter), or colors of water around a red tide
or those of the water before/after a red tide, are calculated as the monthly climatological average of normalized water-leaving
radiances (nLw) with 0.01 degree spatial resolution with SeaWiFS imagery. Criteria for detecting red-tide pixels are established
from analyses of characteristics of the nLws (in the 443, 490, 510, and 555 nm bands) anomalies from BOCs and the nLw spectra
together with the red-tide records in Osaka Bay. The proposed scheme can efficiently indicate the presence or absence of red
tides for independent match-ups with 83% accuracy. Additional validations of specific events indicate that the algorithm performed
well in the study area. These results suggest that the scheme is appropriate to detect red tides in the optically complex
coastal water of the eastern Seto Inland Sea. 相似文献
6.
Takeshi?KuritaniEmail author Takeyoshi?Yoshida Jun-Ichi?Kimura Toshiro?Takahashi Yuka?Hirahara Takashi?Miyazaki Ryoko?Senda Qing?Chang Yoshinori?Ito 《Contributions to Mineralogy and Petrology》2014,167(2):969
The conditions under which rear-arc magmas are generated were estimated using primary basalts from the Sannome-gata volcano, located in the rear of the NE Japan arc. Scoriae from the volcano occur with abundant crustal and mantle xenoliths, suggesting that the magma ascended rapidly from the upper mantle. The scoriae show significant variations in their whole-rock compositions (7.9–11.1 wt% MgO). High-MgO scoriae (MgO > ~9.5 wt%) have mostly homogeneous 87Sr/86Sr ratios (0.70318–0.70320), whereas low-MgO scoriae (MgO < ~9 wt%) have higher 87Sr/86Sr ratios (>0.70327); ratios tend to increase with decreasing MgO content. The high-MgO scoriae are aphyric, containing ~5 vol% olivine microphenocrysts with Mg# [100 × Mg/(Mg + Fe2+)] of up to 90. In contrast, the low-MgO scoriae have crustal xenocrysts of plagioclase, alkali feldspar, and quartz, and the mineralogic modes correlate negatively with whole-rock MgO content. On the basis of these observations, it is inferred that the high-MgO scoriae represent primary or near-primary melts, while the low-MgO scoriae underwent considerable interaction with the crust. Using thermodynamic analysis of the observed petrological features of the high-MgO scoriae, the eruption temperature of the magmas was constrained to 1,160–1,220 °C. Given that the source mantle was depleted MORB-source mantle, the primary magma was plausibly generated by ~7 % melting of a garnet-bearing spinel peridotite; taking this into consideration, and considering the constraints of multi-component thermodynamics, we estimated that the primary Sannome-gata magma was generated in the source mantle with 0.5–0.6 wt% H2O at 1,220–1,230 °C and at ~1.8 GPa, and that the H2O content of the primary magma was 6–7 wt%. The rear-arc Sannome-gata magma was generated by a lower degree of melting of the mantle at greater depths and lower temperatures than the frontal-arc magma from the Iwate volcano, which was also estimated to be generated by ~15 % melting of the source mantle with 0.6–0.7 wt% H2O at ~1,250 °C and at ~1.3 GPa. 相似文献
7.
8.
Naoki Shirai Yuzuru Karouji Kazuya Kumagai Masayuki Uesugi Kaori Hirahara Motoo Ito Naotaka Tomioka Kentaro Uesugi Akira Yamaguchi Naoya Imae Takuji Ohigashi Toru Yada Masanao Abe 《Meteoritics & planetary science》2020,55(7):1665-1680
Chemical compositions of materials used for new sample holders (vertically aligned carbon nanotubes [VACNTs] and polyimide film), which were developed for the analysis of Hayabusa2‐return samples, were determined by instrumental neutron activation analysis and/or instrumental photon activation analysis, to estimate contamination effects from the sample holders. The synthetic quartz plate used for the sample holders was also analyzed. Ten elements (Na, Al, Cr, Mn, Fe, Ni, Eu, W, Au, and Th) and 14 elements (Na, Al, K, Sc, Ti, Cr, Zn, Ga, Br, Sb, La, Eu, Ir, and Au) could be detected in the VACNTs and polyimide film, respectively. The VACNT data show that contamination by this material with respect to the Murchison meteorite is negligible in terms of the elemental ratios (e.g., Fe/Mn, Na/Al, and Mn/Cr) used for the classification of meteorites due to the extremely low density of VACNTs. However, for the Au/Cr ratio, even small degrees (1.7 wt%) of contamination by VACNTs will change the Au/Cr ratio. Elemental ratios used for the classification of meteorites are only influenced by large amounts of contamination (>60 wt%) of polyimide film, which is unlikely to occur. In contrast, detectable effects on Ti isotopic compositions are caused by >0.1 and >0.3 wt% contamination by VACNTs and polyimide film, respectively, and Hf isotopic changes are caused by >0.1 wt% contamination by VACNTs. The new sample holders (VACNTs and polyimide film) are suitable for chemical classification of Hayabusa2‐return samples, because of their ease of use, applicability to multiple analytical instruments, and low contamination levels for most elements. 相似文献
9.
The magnetostratigraphic subdivision of the Plio-Pleistocene series in the Kinki district around Osaka in southwest Japan, based on NRM measurements of volcanic ash beds, is correlated with biostratigraphic and paleoclimatic marker beds as well as past sea level oscillations. At least 10 high sea level stands occurred in the study area between about 1.5 and 0.27 million years ago, all associated with relative warming. A significant change in the composition of flora, from Metasequoia to Fagus dominated assemblages, was observed around the Jaramillo event. 相似文献
10.
— Earthquake faultings have a wide variety of slip behaviors, such as, a log-linear frequency-magnitude relation, characteristic earthquakes, slow slip events, and so on. We report a model which can reproduce a certain variety of observed complex slip behaviors on a fault. Our 3-D model simulates the seismic cycle on a shallow dipping subduction fault in a homogeneous elastic half-space, on which frictional sliding is controlled by a rate- and state-dependent friction law. We find that the behaviors of reproduced seismic cycles depend on a lateral dimension of a seismogenic zone (H) with respect to a constant seismogenic width in dip direction (W). The following three domains appear in the seismic cycle behaviors: (1) Regular, periodic behaviors when H is comparable to W; (2) transitional, quasi-periodic behaviors when H/W~ 3; and (3) complex behaviors when H/W is larger than about 4. The slip behavior in the domain (1) is characterized by a periodical recurrence of a characteristic earthquake, which is centered in strike direction. In the domain (2), although earthquakes are still centered, these recurrence intervals and the sizes are modulated within a certain range. Also, in the domain (3), earthquakes occur not only at the center but at various lateral positions on the seismogenic zone. In this domain, the log-linear frequency-magnitude relations, like the Gutenberg-Richter relation, are produced. Slow slip events also occur at source areas of the earthquakes. It is suggested that a heterogeneous stress distribution at a source region is important, as well as heterogeneities in friction properties on the fault, for understanding the wide variety of slip behaviors in faultings. 相似文献