Re-Os isotope systematics and fractionation of siderophile elements in metal phases from CBa chondrites          下载免费PDF全文

Nao Nakanishi  Tetsuya Yokoyama  Satoki Okabayashi  Tomohiro Usui  Hikaru Iwamori 《Meteoritics & planetary science》2018,53(5):1051-1065

We report Os isotope compositions of metal grains in two CB_a chondrites (Bencubbin and Gujba) determined using a micromilling sampling coupled with thermal ionization mass spectrometry, together with the abundances of major and trace siderophile elements obtained by electron probe microanalysis and femtosecond laser ablation inductively coupled plasma–mass spectrometry. The CB_a metal grains presented ¹⁸⁷Os/¹⁸⁸Os ratios akin to carbonaceous chondrites with limited variations (0.1257–0.1270). Most of the CB_a metal grains were scattered along a ¹⁸⁷Re-¹⁸⁷Os reference isochron of IIIAB iron meteorites, indicating that the CB_a metals experienced limited Re-Os fractionation at the time of their formation. The Re/Os ratios of sampling spots for the CB_a metals, recast from the observed ¹⁸⁷Os/¹⁸⁸Os ratios, had a positive correlation with their Os/Ir ratios. In addition, the metal grains showed a positive correlation in a Pd/Fe versus Ni/Fe diagram. These correlations suggest that the CB_a metal grains have formed via equilibrium condensation or evaporation from a gaseous reservoir at ~10⁻⁴ bar with enhanced metal abundances. Compared to the Bencubbin metals, the Gujba metals are characterized by having systematically lower Pd/Fe and Ni/Fe ratios that span subchondritic values. Such a difference was most likely induced by the compositionally heterogeneous impact plume from which the metals were condensed.  相似文献   

3-D internal architecture of methane hydrate-bearing turbidite channels in the eastern Nankai Trough, Japan     

Satoshi Noguchi  Naoyuki Shimoda  Osamu Takano  Nobutaka Oikawa  Takao Inamori  Tatsuo Saeki  Tetsuya Fujii 《Marine and Petroleum Geology》2011,28(10):1817-1828

The reservoir architecture of methane hydrate (MH) bearing turbidite channels in the eastern Nankai Trough, offshore Japan is evaluated using a combination of 3-D seismic and well data. On the 3-D seismic section, the MH-bearing turbidite channels correspond to complex patterns of strong seismic reflectors, which show the 3-D internal architecture of the channel complex. A seismic-sequence stratigraphic analysis reveals that the channel complex can be roughly classified into three different stages of depositional sequence (upper, middle, and lower). Each depositional sequence results in a different depositional system that primarily controls the reservoir architecture of the turbidite channels. To construct a 3-D facies model, the stacking patterns of the turbidite channels are interpreted, and the reservoir heterogeneities of MH-bearing sediments are discussed. The identified channels at the upper sequence around the β1 well exhibit low-sinuosity channels consisting of various channel widths that range from tens to several hundreds of meters. Paleo-current flow directions of the turbidite channels are typically oriented along the north-northeast-to-south-southwest direction. High-amplitude patterns were identified above the channels along the north-to-south and north-northeast-to-south-southeast directions. These roughly coincide with the paleo-current flow of the turbidite channels. An interval velocity using high-density velocity analysis shows that velocity anomalies (>2000 m/s) are found on the northeastern side of the turbidite channels. The depositional stage of the northeastern side of the turbidite channels exhibits slightly older sediment stages than the depositional stages of the remaining channels. Hence, the velocity anomalies of the northeastern side of the channels are related to the different stages of sediment supply, and this may lead to the different reservoir architectures of the turbidite channels.  相似文献   

Role of Acoustic Emission for Solving Rock Engineering Problems in Indonesian Underground Mining   总被引：2，自引：0，他引：2  

Suseno Kramadibrata  Ganda Marihot Simangunsong  Kikuo Matsui  Hideki Shimada 《Rock Mechanics and Rock Engineering》2011,44(3):281-289

In situ stress measurement is not well accepted yet in Indonesia due to the unavailability of technology, high costs and because it is impractical in remote regions. Alternatively, the Kaiser effect of acoustic emission (AE) can be used as a method for determining the stress-state at depth, without creating induced stress and is practical in remote areas. This paper is focused on the development of the AE test. The research has started to study the phenomenon of stress memory in a rock sample, the factors influencing the phenomenon, and finally, to determine the in situ stresses around underground excavations by applying the AE method. It is expected that knowledge in gaining the most important input parameters for maintaining the stability of underground excavations can be well understood and be reliably conducted at a reasonable cost.  相似文献   

原地应力状态三维分布估算方法的发展及初步应用     

Tanno Takeo  Hirano Toru  Matsui Hiroya  詹自敏 《国际地震动态》2011,(1):91-97

日本原子能机构(Japan Atomic Energy Agency)提出了一种方法,即通过地表原地应力测量所得的有限数据精确估算任意一点的实际原地应力状态分布.我们假定实际地应力是由上覆岩层压力和板块构造力的综合作用形成的,并建立了两种模型:三维有限元模型和边界元模型,模型考虑了地质情况的不均匀性,如岩石类型的变化和...  相似文献   

Sediment transport in high‐speed flows over a fixed bed: 2. Particle impacts and abrasion prediction          下载免费PDF全文

Christian Auel  Ismail Albayrak  Tetsuya Sumi  Robert M. Boes 《地球表面变化过程与地形》2017,42(9):1384-1396

Single bed load particle impacts were experimentally investigated in supercritical open channel flow over a fixed planar bed of low relative roughness height simulating high‐gradient non‐alluvial mountain streams as well as hydraulic structures. Particle impact characteristics (impact velocity, impact angle, Stokes number, restitution and dynamic friction coefficients) were determined for a wide range of hydraulic parameters and particle properties. Particle impact velocity scaled with the particle velocity, and the vertical particle impact velocity increased with excess transport stage. Particle impact and rebound angles were low and decreased with transport stage. Analysis of the particle impacts with the bed revealed almost no viscous damping effects with high normal restitution coefficients exceeding unity. The normal and resultant Stokes numbers were high and above critical thresholds for viscous damping. These results are attributed to the coherent turbulent structures near the wall region, i.e. bursting motion with ejection and sweep events responsible for turbulence generation and particle transport. The tangential restitution coefficients were slightly below unity and the dynamic friction coefficients were lower than for alluvial bed data, revealing that only a small amount of horizontal energy was transferred to the bed. The abrasion prediction model formed by Sklar and Dietrich in 2004 was revised based on the new equations on vertical impact velocity and hop length covering various bed configurations. The abrasion coefficient k_v was found to be vary around k_v ~ 10⁵ for hard materials (tensile strength f_t > 1 MPa), one order of magnitude lower than the value assumed so far for Sklar and Dietrich's model. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

Direct determination of barium in Sea water by inductively coupled plasma emission spectrometry     

Masahito Sugiyama  Masakazu Matsui  Eiichiro Nakayama 《Journal of Oceanography》1984,40(4):295-302

A method for the determination of barium in sea water was investigated using inductively coupled plasma emission spectrometry, and sea water samples from the Japan Sea and the Pacific Ocean were directly analyzed by this method. Artificial sea water was used to prepare matrix matched standard solutions to overcome the problem of physical interference. The detection limit (signal/noise ratio=2) for barium in deionized and distilled water was 0.08µg l^?1 and in sea water, 0.12µg l^?1. The reproducibilities in the purified water and in the sea water at the 10µg l^?1 level were 0.7% a#FFFFFFnd 0.5%, respectively. The barium concentration in both the Japan Sea and the Pacific Ocean increased with depth and ranged between 5.5–10.0µg l^?1 and 4.1–18.4µg l^?1, respectively.  相似文献   

Long-Term Effect of TMD on Vibration Control of An MDOF Offshore Fixed Platform     

SHI  Xiang 《中国海洋工程》2003,17(4):481-494

A three-dimensional fixed offshore platform in deep water modeled by the finite element method is studied in this paper. Analysis of the dynamic response of the MDOF structure is realized taking the non-linearity of the wave drag force and the wave-structure interaction into account. The structural response statistics, which have Gaussian distributions, are used to evaluate the vibration effect of the structure without TMD and with TMD. And an optimal method to design TMD controlling the first mode of the multi-mode structure is proposed. Moreover, the probabilities of occurrence of sea states at the platform site are considered for prediction of the long-term effect of a TMD. Simulation results demonstrate that the long-term effect of a well-designed TMD is good and the practical use is possible due to the good stability of its optimal parameters under different sea states.  相似文献   

Evaluation of the Residual Mass Fractionation in High-Precision Cr Isotopic Analysis with TIMS     

Tetsuya Yokoyama  Yusuke Ohkuma  Keiji Nishikawa  Koki Sumiya  Ikshu Gautam 《Geostandards and Geoanalytical Research》2023,47(2):415-435

The Cr isotope ratios of terrestrial and extra-terrestrial materials are emerging as one of the most important tracers in geosciences. Previous studies on Cr isotopic measurements using TIMS have found that there is residual Cr isotopic fractionation between the mass-fractionation-corrected ⁵³Cr/⁵²Cr and ⁵⁴Cr/⁵²Cr ratios, which may cause an offset of obtained ratios from the reference values. The residual fractionation was thought to be caused by the evaporation of Cr-oxide species during thermal ionisation, but the mechanism by which this residual fractionation could be reduced remained unclear. Here we revisit the issue of residual fractionation and propose that this problem can be alleviated by utilising W filaments instead of conventionally used Re filaments for Cr ionisation. Using W filaments, the formation of CrO⁺ was suppressed during heating as the filament temperature was ~ 100 °C lower than when Re filaments were used. In repeated measurement of a carbonaceous chondrite, the intermediate precisions of ⁵³Cr/⁵²Cr and ⁵⁴Cr/⁵²Cr ratios in the W filament runs were two to three times better than those of the Re filament runs. Therefore, the new finding of this study will be of key importance for future studies of Cr isotopes for terrestrial and extra-terrestrial materials.  相似文献   

Transient crater growth in granular targets: An experimental study of low velocity impacts into glass sphere targets     

Satoru Yamamoto  Koji Wada  Takafumi Matsui 《Icarus》2006,183(1):215-224

We experimentally studied the formation and collapse processes of transient craters. Polycarbonate projectiles with mass of 0.49 g were impacted into the soda-lime glass sphere target (mean diameters of glass spheres are ∼36, 72, and 220 μm, respectively) using a single-stage light-gas gun. Impact velocity ranged from 11 to 329 m s⁻¹. We found that the transient crater collapses even at laboratory scales. The shape (diameter and depth) of the transient crater differs from that of the final crater. The depth-rim diameter ratios of the final and transient craters are 0.11-0.14 and 0.26-0.27, respectively. The rim diameter of both the transient and final crater depends on target material properties; however, the ratio of final to transient crater diameter does not. This suggests that target material properties affect the formation process of transient craters even in the gravity regime, and must be taken into account when scaling experimental results to planetary scales. By observing impacts into glass sphere targets, we show that although the early stage of the excavation flow does not depend on the target material properties, the radial expansion of the cavity after the end of vertical expansion does. This suggests that the effect of target material properties is specifically important in the later part of the crater excavation and collapse.  相似文献   

Meteorological assessment of the surface temperatures on Titan: constraints on the surface type     

Tetsuya Tokano 《Icarus》2005,173(1):222-242

The latitudinal profile of near-surface air temperature on Titan retrieved by Voyager 1 has been difficult to understand and raised several speculations about possible exotic processes that might be occurring near Titan's surface, while the thermal properties of the surface itself are unknown. This study systematically investigates the seasonal and spatial variation of the surface temperature and air temperature in the lower troposphere by a 3-dimensional general circulation model for different putative surface types (porous icy regolith, rock-ice mixture, hydrocarbon lakes). For any viable surface type the surface temperature is unlikely to be constant through the year and should more or less vary seasonally and even diurnally, most likely by a few K. Recent observations of tropospheric clouds may be evidence of seasonal variation of the surface temperature and the model predicts in the case of solid surface the development of a convective layer with superadiabatic lapse rates near the surface exactly at those latitudes and seasons where clouds have been identified. The latitudinal profile of the surface temperature retrieved from Voyager 1 infrared spectra can be explained without invoking exotic effects, provided the thermal inertia of the surface is relatively small and/or the surface albedo is low. A dominance of water ice (high thermal inertia and high albedo) at the surface is unfavorable to reproduce the observation. The latitudinal gradient of the surface temperature is particularly large at the hydrocarbon lake surface due to low albedo and small surface drag. Local anomalies of the surface albedo or surface thermal inertia are likely to cause substantial inhomogeneities of the surface temperature. Quasi-permanent accumulation of stratospheric haze at both poles would create a perennial equator-to-pole contrast of the surface temperature, but also a substantially lower global-mean surface temperature due to an enhanced anti-greenhouse effect in summer. The air temperature in the lower troposphere exhibits a tiny latitudinal gradient and a pole-to-pole gradient due to the presence of a pole-to-pole Hadley circulation, indicating that the temperature within the planetary boundary layer may exhibit a vertical profile characteristic of season, location and scenario. There may be a shallow near-surface inversion layer in cold seasons and a shallow convective layer in warm seasons.  相似文献