A two-layer model for studying 2D dissolved pollutant runoff over impermeable surfaces     

Taotao Zhang  Yang Xiao  Dongfang Liang  Hongwu Tang  Junzeng Xu  Saiyu Yuan  Nairu Wang  Bin Luan 《水文研究》2021,35(5):e14152

Dissolved pollutants in stormwater are a main contributor to water pollution in urban environments. However, many existing transport models are semi-empirical and only consider one-dimensional flows, which limit their predictive capacity. Combining the shallow water and the advection–diffusion equations, a two-dimensional physically based model is developed for dissolved pollutant transport by adopting the concept of a ‘control layer’. A series of laboratory experiments has been conducted to validate the proposed model, taking into account the effects of buildings and intermittent rainfalls. The predictions are found to be in good agreement with experimental observations, which supports the assumption that the depth of the control layer is constant. Based on the validated model, a parametric study is conducted, focusing on the characteristics of the pollutant distribution and transport rate over the depth. The hyetograph, including the intensity, duration and intermittency, of rainfall event has a significant influence on the pollutant transport rates. The depth of the control layer, rainfall intensity, surface roughness and area length are dominant factors that affect the dissolved pollutant transport. Finally, several perspectives of the new pollutant transport model are discussed. This study contributes to an in-depth understanding of the dissolved pollutant transport processes on impermeable surfaces and urban stormwater management.  相似文献   

基于OSM的浮动车轨迹数据校正方法     

胡向勇  郭圆 《测绘通报》2020,(10):139

浮动车轨迹数据具有覆盖范围广、更新周期短、获取成本低等特点，对于地图的生产和更新具有重要意义，但是由于受到卫星信号被遮挡及多路径效应的影响，其精度普遍较低。本文采用一种基于OSM作为参考数据的方式对浮动车轨迹数据进行校正。首先通过一种分层时空地图匹配的方式将轨迹数据与OSM进行匹配；然后采用引力模型对数据进行校正；最后在武汉市出租车轨迹数据上进行了试验。结果表明，本文提出的数据校正方法可以有效地提高浮动车轨迹数据的精度。  相似文献   

“一带一路”沿线国家石油资源流动类型演变     

孙琪  赵媛  张新林  夏四友 《世界地理研究》2020,29(2):337-345

综合运用石油自给率、流动比率等方法，以“一带一路”沿线国家为研究对象，对1995—2014年各国石油资源流动类型时空演变进行研究。结果表明：1）1995—2014年石油净补给型国家数量较为稳定，无产型或低产型国家的石油贸易倾向变化相对较小；基本自给型国家数量占比最大，1995年占比1/2，其余四个年份占比稳定在1/3；净支出型国家数量显著增加，至2014年其中有5个国家保持不变，表明这些国家的石油产量具有较大的优势。2）1995年和2014年汇地国家均为39个国家，其中有34个国家一直保持汇地职能，空间分布上呈东多西少，南多北少，东西分化以西亚、中亚、东欧为界；有14个国家一直保持源地职能，其空间分布格局与汇地相应，西多东少，南多北少，主要分布于西亚、东欧及中亚；交流地数量较少，呈分散分布，且分布地不稳定。3）从数量变化来看，研究期内汇地略有增加，源地略有减少，交流地略有增加；“一带一路”源地总出口量与汇地总进口量的比呈逐年降低趋势。  相似文献   

无水硝酸镁制备过程中的水解特性          下载免费PDF全文

钟远  袁俊生  王敏  王怀有  李锦丽  冉广芬 《盐湖研究》2020,28(3):99-108

在槽式太阳能热发电领域,硝酸镁基熔盐逐渐引起关注。通过六水硝酸镁煅烧法制备无水硝酸镁,采用拉曼、DSC与XRD表征脱水产物,系统研究了环境压力、脱水温度与时间对六水硝酸镁脱水和水解的影响。结果表明,六水硝酸镁在煅烧过程中水解为碱式硝酸镁Mg_3(OH)_4(NO_3)_2,在水溶液中进一步分解为Mg(OH)_2。随着煅烧温度和时间的增加,脱水产物中的含水量逐渐减少,同时水解产物Mg_3(OH)_4(NO_3)_2含量逐渐增加。真空环境下煅烧,可显著降低硝酸镁的水解反应。六水硝酸镁在真空环境下230℃煅烧1.5 h,所制备的无水硝酸镁中水解产物含量为3.63%。制备的硝酸镁可进一步用于硝酸镁基熔盐的研究。  相似文献   

空间分析与生物地球化学循环:西藏林周县大骨节病患病村与非患病村的比较研究     

田原  查欣洁  高星  戴尔阜  余成群 《资源与生态学报(英文版)》2020,11(2):232-246

西藏林周县是我国大骨节病(KBD)患病较为严重的地区之一,本文将林周县作为研究区,通过使用地理探测器(GeoDetector)量化分析KBD患病率风险因子的影响,并使用环境化学方法验证空间分析结果。通过对10个潜在影响因子的分析以及对当地KBD患病村和非患病村的土壤-水-粮食-人这一生物地球化学循环的环境化学分析,结果表明:(1)林周县KBD由一组多重且交互作用的环境影响因子共同作用影响,其中最重要的控制因子是地层因子;(2)所有环境介质(土壤、水、谷物)及人体组织中的硒元素浓度在KBD患病区均低于非患病区;(3)当地居民对硒和铬的摄入严重不足,尤其是KBD患病村中居民硒元素平均日摄入量(ADD)大约仅为世界卫生组织(WHO)建议的成人基本摄入量下限的4%;(4)我们推测,当地居民患病主要是由于地层这一影响因子,这是由于通过生态系统的迁移转化导致当地人口严重硒缺乏,最终导致地方性生物地球化学硒缺乏。  相似文献   

Seismic design of floor–wall joints of multi-storey CLT buildings to comply with regularity in elevation     

Davide Trutalli  Luca Pozza 《Bulletin of Earthquake Engineering》2018,16(1):183-201

The effects of irregularity in elevation of cross-laminated timber buildings have not been fully analysed in literature to provide useful information for the design. In this work, a number of building configurations, regular or irregular in elevation, characterized by a different arrangement per storey of the floor–wall joints have been analysed by means of non-linear dynamic analyses. Comparative results in terms of ratio between the behaviour q-factor of the investigated irregular configurations and that of reference regular ones, show that less dissipative capacity can be expected if the building is irregular due to a disequilibrium among storeys between the actual and the required strength provided by the floor–wall joints. A correlation method to estimate the behaviour q-factor for perfectly regular cross-laminated timber buildings is here presented and extended to in-elevation irregular ones. A new empirical formulation to assess the reliable corrective factor accounting for the irregularity in elevation of cross-laminated timber buildings, according to Eurocode 8 provisions, is also proposed. A final discussion about the implications of in-elevation irregularity on the building design is reported.  相似文献   

Seismic performance and damage incurred by monolithic concrete self-centering rocking walls under the effect of axial stress ratio     

Abouzar Jafari  Mohammad Reza Ghasemi  Habib Akbarzadeh Bengar  Behrooz Hassani 《Bulletin of Earthquake Engineering》2018,16(2):831-858

Self-centering rocking walls offer the possibility of minimizing repair costs and downtimes, and also nullify the residual drift after seismic events, thanks to their self-centering properties. In this paper, the effect of axial stress ratio on the behavior of monolithic self-centering rocking walls is investigated by utilizing a developed finite element model. To verify the validity of the finite element model, results and observed damage in the model are compared with those of a full-scale wall test. The axial stress ratio is varied from 0.024 to 0.30 while keeping the other structural parameters constant. For qualitative damage evaluation, the observed damage in the model compared with expected damage states of desired performance levels. In order to evaluate the incurred damage quantitatively, the amount of crushing and damage in the wall is calculated by utilizing several ratios (crushing ratio and damage ratio). Furthermore, seismic response factors (i.e., μ, R and C_d) are calculated for different axial stress ratio values. The obtained results showed that, in order to satisfy the requirements of desired performance levels, the maximum axial stress ratio should be approximately within the range of 0.10–0.15. In addition, the maximum overall damage ratio and crushing ratio are suggested to be less than 5%. For axial stress ratio higher than 0.15, the flag-shaped pattern of hysteresis curves completely disappeared and the variation of displacement ductility is less sensitive to axial stress ratio. Considering the maximum axial stress ratio limited to 0.150, values of 4 and 3.5 are conservatively proposed as a period-independent response modification factor and displacement modification factor of the investigated structural wall, respectively.  相似文献   

The 2014 Earthquake Model of the Middle East: seismogenic sources     

Laurentiu Danciu  Karin Şeşetyan  Mine Demircioglu  Levent Gülen  Mehdi Zare  Roberto Basili  Ata Elias  Shota Adamia  Nino Tsereteli  Hilal Yalçın  Murat Utkucu  Muhammad Asif Khan  Mohammad Sayab  Khaled Hessami  Andrea N. Rovida  Massimiliano Stucchi  Jean-Pierre Burg  Arkady Karakhanian  Hektor Babayan  Mher Avanesyan  Tahir Mammadli  Mahmood Al-Qaryouti  Doğan Kalafat  Otar Varazanashvili  Mustafa Erdik  Domenico Giardini 《Bulletin of Earthquake Engineering》2018,16(8):3465-3496

  相似文献   

Probabilistic seismic hazard assessment for South-Eastern France     

Christophe Martin  Gabriele Ameri  David Baumont  David Carbon  Gloria Senfaute  Jean-Michel Thiry  Ezio Faccioli  Jean Savy 《Bulletin of Earthquake Engineering》2018,16(6):2477-2511

The accurate evaluation and appropriate treatment of uncertainties is of primary importance in modern probabilistic seismic hazard assessment (PSHA). One of the objectives of the SIGMA project was to establish a framework to improve knowledge and data on two target regions characterized by low-to-moderate seismic activity. In this paper, for South-Eastern France, we present the final PSHA performed within the SIGMA project. A new earthquake catalogue for France covering instrumental and historical periods was used for the calculation of the magnitude-frequency distributions. The hazard model incorporates area sources, smoothed seismicity and a 3D faults model. A set of recently developed ground motion prediction equations (GMPEs) from global and regional data, evaluated as adequately representing the ground motion characteristics in the region, was used to calculate the hazard. The magnitude-frequency distributions, maximum magnitude, faults slip rate and style-of-faulting are considered as additional source of epistemic uncertainties. The hazard results for generic rock condition (Vs30 = 800 m/s) are displayed for 20 sites in terms of uniform hazard spectra at two return periods (475 years and 10,000 years). The contributions of the epistemic uncertainties in the ground motion characterizations and in the seismic source characterization to the total hazard uncertainties are analyzed. Finally, we compare the results with existing models developed at national scale in the framework of the first generation of models supporting the Eurocode 8 enforcement, (MEDD 2002 and AFPS06) and at the European scale (within the SHARE project), highlighting significant discrepancies at short return periods.  相似文献   

Assessment of the influence of horizontal diaphragms on the seismic performance of vernacular buildings     

Javier Ortega  Graça Vasconcelos  Hugo Rodrigues  Mariana Correia 《Bulletin of Earthquake Engineering》2018,16(9):3871-3904

The awareness and preservation of the vernacular heritage and traditional construction techniques and materials is crucial as a key element of cultural identity. However, vernacular architecture located in earthquake prone areas can show a particularly poor seismic performance because of inadequate construction practices resulting from economic restraints and lack of resources. The horizontal diaphragms are one of the key aspects influencing the seismic behavior of buildings because of their major role transmitting the seismic actions to the vertical resisting elements of the structure. This paper presents a numerical parametric study adopted to understand the seismic behavior and resisting mechanisms of vernacular buildings according to the type of horizontal diaphragm considered. Detailed finite element modeling and nonlinear static (pushover) analyses were used to perform the thorough parametric study aimed at the evaluation and quantification of the influence of the type of diaphragm in the seismic behavior of vernacular buildings. The reference models used for this study simulate representative rammed earth and stone masonry vernacular buildings commonly found in the South of Portugal. Therefore, this paper also contributes for a better insight of the structural behavior of vernacular earthen and stone masonry typologies under seismic loading.  相似文献