Stable isotope study of the Archaean rocks of the Vredefort impact structure,central Kaapvaal Craton,South Africa     

Åke Fagereng  Chris Harris  Mandy La Grange  Gary Stevens 《Contributions to Mineralogy and Petrology》2008,155(1):63-78

The Vredefort dome in the Kaapvaal Craton was formed as a result of the impact of a large meteorite at 2.02 Ga. The central core of Archaean granitic basement rocks is surrounded by a collar of uplifted and overturned strata of the Witwatersrand Supergroup, exposing a substantial depth section of the Archaean crust. Orthogneisses of the core show little variation in whole-rock δ ¹⁸O value, with the majority being between 8 and 10‰, with a mean of 9.2‰ (n = 35). Quartz and feldspar have per mil differences that are consistent with O-isotope equilibrium at high temperatures, suggesting minimal interaction with fluids during subsequent cooling. These data refute previous suggestions that the Outer Granite Gneiss (OGG) and Inlandsee Leucogranofels (ILG) of the core represent middle and lower crust, respectively. Granulite-facies greenstone remnants from the ILG have δ ¹⁸O values that are on average 1.5‰ higher than the ILG host rocks and are unlikely, therefore, to represent the residuum from the partial melting event that formed the host rock. Witwatersrand Supergroup sedimentary rocks of the collar, which were metamorphosed at greenschist-to amphibolite-facies conditions, generally have lower δ ¹⁸O values than the core rocks with a mean value for metapelites of 7.7‰ (n = 45). Overall, through an ∼20 km thick section of crust, there is a general increase in whole-rock δ ¹⁸O value with increasing depth. This is the reverse of what is normal in the crust, largely because the collar rocks have δ ¹⁸O values that are unusually low in comparison with metamorphosed sedimentary rocks worldwide. The collar rocks have δD values ranging from −35 to −115‰ (average −62‰, n = 29), which are consistent with interaction with water of meteoric origin, having a δD of about −25 to −45‰. We suggest that fluid movement through the collar rocks was enhanced by impact-induced secondary permeability in the dome structure. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.  相似文献   

The BEAM-project: prediction and assessment of mixture toxicities in the aquatic environment     

Thomas Backhaus  Rolf Altenburger  sa Arrhenius  Hans Blanck  Michael Faust  Antonio Finizio  Paola Gramatica  Matthias Grote  Marion Junghans  Wiebke Meyer  Manuela Pavan  Tobias Porsbring  Martin Scholze  Roberto Todeschini  Marco Vighi  Helge Walter  L. Horst Grimme 《Continental Shelf Research》2003,23(17-19):1757

Freshwater and marine ecosystems are exposed to various multi-component mixtures of pollutants. Nevertheless, most ecotoxicological research and chemicals regulation focus on hazard and exposure assessment of individual substances only, the problem of chemical mixtures in the environment is ignored to a large extent. In contrast, the assessment of combination effects has a long tradition in pharmacology, where mixtures of chemicals are specifically designed to develop new products, e.g. human and veterinary drugs or agricultural and non-agricultural pesticides. In this area, two concepts are frequently used and are thought to describe fundamental relationships between single substance and mixture effects: Independent Action (Response Addition) and Concentration Addition. The question, to what extent these concepts may also be applied in an ecotoxicological and regulatory context may be considered a research topic of major importance, as the concepts would allow to make use of already existing single substance toxicity data for the predictive assessment of mixture toxicities. Two critical knowledge gaps are identified: (a) There is a lack of environmental realism, as a huge part of our current knowledge about the applicability of the concepts is restricted to artificial situations with respect to mixture composition or biological effect assessment. (b) The knowledge on what exactly is needed for using the concepts as tools for the predictive mixture toxicity assessment is insufficient. Both gaps seriously hamper the necessary, scientifically sound consideration of mixture toxicities in a regulatory context.In this paper, the two concepts will be briefly introduced, the necessity of considering the toxicities of chemical mixtures in the environment will be demonstrated and the applicability of Independent Action and Concentration Addition as tools for the prediction and assessment of mixture toxicities will be discussed. An overview of the specific aims and approaches of the BEAM project to fill in the identified knowledge gaps is given and first results are outlined.  相似文献   

Magnetic Lasso: A New Kinematic Solar Wind Propagation Method     

M. Dósa  A. Opitz  Z. Dálya  K. Szegő 《Solar physics》2018,293(9):127

Solar wind propagation from the point of measurement to an arbitrary target in the heliosphere is an important input for heliospheric, planetary and cometary studies. In this paper a new kinematic propagation method, the magnetic lasso method is presented. Compared to the simple ballistic approach our method is based on reconstructing the ideal Parker spiral connecting the target with the Sun by testing a previously defined range of heliographic longitudes. The model takes into account the eventual evolution of stream–stream interactions and handles these with a simple model based on the dynamic pressure difference between the two streams. Special emphasis is given to input data cleaning by handling interplanetary coronal mass ejection events as data gaps due to their different propagation characteristics. The solar wind bulk velocity is considered radial and constant. Density and radial magnetic field are propagated by correcting with the inverse square of the radial distance. The model has the advantage that it can be coded easily and fitted to the problem; it is flexible in selecting and handling input data and requires little running time.  相似文献   

Free allocation in the 3rd EU ETS period: assessing two manufacturing sectors     

Christian Stenqvist  Max Åhman 《Climate Policy》2016,16(2):125-144

This article provides an analysis of the EU Emissions Trading Scheme (ETS) and the harmonized benchmark-based allocation procedures by comparing two energy-intensive sectors with activities in three Member States. These sectors include the cement industry (CEI) and the pulp and paper industry (PPI) in the UK, Sweden, and France. Our results show that the new procedures are better suited for the more homogeneous CEI, in which the outcome of stricter allocation of emissions allowances is consistent between Member States. For the more heterogeneous PPI – in terms of its product portfolios, technical infrastructures, and fuel mixes – the allocation procedures lead to diverse outcomes. It is the lack of product benchmark curves, and the alternative use of benchmark values that are biased towards a fossil fuel-mix and are based on specific energy use rather than emission intensity, which leads to allocations to the PPI that do not represent the average performance of the top 10% of GHG-efficient installations. Another matter is that grandfathering is still present via the historically based production volumes. How to deal with structural change and provisions regarding capacity reductions and partial cessation is an issue that is highly relevant for the PPI but less so for the CEI.

Policy relevance

After an unprecedented amount of consultation with industrial associations and other stakeholders, a harmonized benchmark-based allocation methodology was introduced in the third trading period of the EU ETS. Establishing a reliable and robust benchmark methodology for free allocation that shields against high direct carbon costs, is perceived as fair and politically acceptable, and still incentivizes firms to take action, is a significant challenge. This article contributes to a deeper understanding of the challenges in effectively applying harmonized rules in industrial sectors that are heterogeneous. This is essential for the debate on structural reformation of the EU ETS, and for sharing experiences with other emerging emissions trading systems in the world that also consider benchmark methodologies.  相似文献   

Image-aided platform orientation determination with a GNSS/low-cost IMU system using robust-adaptive Kalman filter     

Wenlin Yan  Luísa Bastos  José A. Gonçalves  Américo Magalhães  Tianhe Xu 《GPS Solutions》2018,22(1):12

The availability of miniaturized sensors with enhanced capabilities, new methods for image processing, and easy access to small and low-weight airborne platforms for data acquisition, including unmanned vehicles, opens new possibilities for geodetic navigation applications and developing new developments in sensor fusion. In this context, the development of efficient methods, based on low-cost sensors, to extract precise georeferenced information from digital cameras is of utmost interest. We present a method to improve the performance of the integration of GNSS/low-cost IMU by exploiting the orientation changes retrieved from digital images. In this work, a robust-adaptive Kalman filter is also introduced to further improve the performance of the method deployed. The adaptive factor and the robust factor accomplished are determined by innovation information and the threshold value of orientation changes between consecutive images. Results from airborne tests used to assess the performance of the method are presented. The results show that using a non-metric camera, the Euler angle estimation accuracy of the GNSS/low-cost IMU integration can be improved to be close to 0.5 degree and an additional improvement, which can reach 59%, can be achieved after using the robust-adaptive Kalman filter.  相似文献   

International and national climate policies for aviation: a review     

Jörgen Larsson  Anna Elofsson  Thomas Sterner  Jonas Åkerman 《Climate Policy》2019,19(6):787-799

Aviation constitutes about 2.5% of all energy-related CO₂ emissions and in addition there are non-CO₂ effects. In 2016, the ICAO decided to implement a Carbon Offsetting and Reduction Scheme for International Aviation (CORSIA) and in 2017 the EU decided on faster emission reductions in its Emissions Trading System (EU ETS), which since 2012 includes the aviation sector. The effects of these policies on the expected development of air travel emissions from 2017 to 2030 have been analyzed. For the sample country Sweden, the analysis shows that when emissions reductions in other sectors are attributed to the aviation sector as a result of the EU ETS and CORSIA, carbon emissions are expected to reduce by ?0.8% per year (however if non-CO₂ emissions are included in the analysis, then emissions will increase). This is much less than what is needed to achieve the 2°C target. Our analysis of potential national aviation policy instruments shows that there are legally feasible options that could mitigate emissions in addition to the EU ETS and CORSIA. Distance-based air passenger taxes are common among EU Member States and through increased ticket prices these taxes can reduce demand for air travel and thus reduce emissions. Tax on jet fuel is an option for domestic aviation and for international aviation if bilateral agreements are concluded. A quota obligation for biofuels is a third option.

Key policy insights

• Existing international climate policies for aviation will not deliver any major emission reductions.

• Policymakers who want to significantly push the aviation sector to contribute to meeting the 2°C target need to work towards putting in place tougher international policy instruments in the long term, and simultaneously implement temporary national policy instruments in the near-term.

• Distance-based air passenger taxes, carbon taxes on jet fuel and quota obligations for biofuels are available national policy options; if they are gradually increased, and harmonized with other countries, they can help to significantly reduce emissions.

  相似文献   

A Late Younger Dryas–Early Holocene tephrostratigraphy for Fosen,Central Norway     

EWA M. LIND  STEFAN WASTEGÅRD  JEPPE J. LARSEN 《第四纪科学杂志》2013,28(8):803-811

  相似文献   

A case study to verify methods for estimating transmissivity distributions along boreholes     

Åsa Fransson 《Hydrogeology Journal》2007,15(2):307-313

Two methods, both using data from fixed-interval-length hydraulic tests and geological mapping on different scales, have been utilised to estimate transmissivity distributions of individual fractures. Individual fracture properties are of importance in estimating transport of water and solutes; they influence the spreading of grout when sealing tunnels. One of the methods is non-parametric, while the other is based on combinatorics and the multiplication principle. The study verified the usefulness of both methods for estimating the probability of conductive and non-conductive fractures, and the transmissivity distributions. Data for estimating transmissivity distributions originate from flow logging of a borehole in Sweden. Fracture frequency data are from core logging and images using a borehole image processing system (BIPS). Estimated transmissivity distributions, based on flow log data from 3-m sections (test scale length, L: 3 m, and step length, dL: 3 m), were compared with transmissivities obtained directly from detailed, overlapping flow logging which identify individual conductive fractures (test scale, L: 0.5 m, step length, dL: 0.1 m). The latter data are considered to be an acceptable approximation of the individual fracture transmissivities; the agreement, compared with the calculated transmissivity distributions based on 3-m section data, is good for both methods.

---

Resumen Se han utilizado dos métodos, ambos procesando datos de pruebas hidráulicas de longitud e intervalo fijo y mapas geológicos en distintas escalas, para estimar las distribuciones de transmisividad de fracturas individuales. Las propiedades de fracturas individuales son de importancia para estimar el transporte de agua y solutos; las propiedades influyen en la propagación de lechada al sellar túneles. Uno de los métodos es no paramétrico mientras que el otro se basa en el principio de multiplicación y combinatorio. El estudio verifica la utilidad de ambos métodos para estimar la probabilidad de fracturas conductivas y no conductivas y las distribuciones de transmisividad. Los datos para estimar las distribuciones de transmisividad se originan del registro de flujo de un pozo en Suecia. Los datos de frecuencia de fracturas provienen de registros de núcleo e imágenes usando un Sistema de Procesamiento de Imágenes de Pozo (BIPS). Se compararon las distribuciones estimadas de transmisividad basadas en datos del registro de flujo en secciones de 3 m (longitud de escala de la prueba L: 3 m, y escalón de longitud dL: 3 m), con transmisividades obtenidas directamente de registros detallados de flujo superpuesto el cual identifica fracturas conductivas individuales (escala de la prueba, L: 0.5 m, escalón de longitud, dL: 0.1 m). Los últimos datos se consideran una aproximación aceptable de las transmisividades de fracturas individuales; la consistencia, comparada con las distribuciones de transmisividad calculada basadas en datos de sección de 3 m, es buena para ambos métodos.

---

Résumé Deux méthodes ont été testées afin d’estimer la distribution des transmissivités de fractures unitaires; toutes deux utilisent des données issues de tests hydrauliques effectués à intervalles réguliers et de cartographies géologiques à plusieurs échelles. La connaissance des propriétés des fractures unitaires est importante pour estimer le transport d’eau et de solutés; elles influencent en outre l’étalement du coulis lors du scellement des tunnels. La première méthode est non-paramétrique, et la seconde repose sur l’analyse combinatoire et le principe de multiplication. Cette étude a vérifié l’utilité des deux méthodes pour estimer la probabilité d’occurrence de fractures conductrices et non-conductrices, et la distribution des transmissivités. Les distributions des transmissivités ont été estimées à partir de diagraphies effectuées sur un forage situé en Suède. Les densités de fracturation proviennent de carottages et d’imagerie BIPS (Borehole Image Processing System). Les distributions estimées des transmissivités, basées sur des diagraphies de flux effectuées sur des sections de 3 m (échelle du test L:3 m; pas dL:3 m), ont été comparées aux transmissivités obtenues sur des diagraphies de flux détaillées et se chevauchant, identifiant les fractures conductrices unitaires (échelle du test L: 0.5 m ; pas dL: 0.1 m). Il est admis que ces dernières données représentent une approximation satisfaisante des transmissivités des fractures unitaires; les deux méthodes sont en accord avec les distributions des transmissivités calculées à partir des données acquises sur des sections de 3 m.

  相似文献   

Downscaling a twentieth century global climate simulation to the North Sea   总被引：2，自引：1，他引：2  

Bjørn Ådlandsvik  Mats Bentsen 《Ocean Dynamics》2007,57(4-5):453-466

The regional ocean model system (ROMS) is used to downscale a 26-year period of the twentieth century 20C3M experiment from the global coupled Bergen climate model (BCM) for the North Sea. Compared to an observational-based climatology, BCM have good results on the mean temperature, except for too low winter temperature. This is connected to a too weak inflow of Atlantic water. The downscaling gives added value to the BCM results by providing regional details, doubling the Atlantic inflow, and improving the mean winter temperature. For mean salinity, BCM has values very close to the climatology, whereas the downscaling becomes too fresh. The downscaling, however, improves the sea surface salinity, the vertical structure, and the Norwegian Coastal Current. It is concluded that the downscaling procedure as presented here is a suitable tool for assessing the future Atlantic inflow and sea temperature in the North Sea based on a global climate projection.  相似文献   

A green lead-containing orthoclase     

Dr. F. Čech  Dr. Z. Mísař  Dr. P. Povondra 《Mineralogy and Petrology》1971,15(3):213-231

  相似文献