Use of a trench adjacent to a shallow foundation as a mitigation measure for hazards associated with reverse faulting     

Sadra  Vahid  Ghalandarzadeh  Abbas  Ashtiani  Mehdi 《Acta Geotechnica》2020,15(11):3167-3182

Acta Geotechnica - Evidence from recent earthquakes reminds us that fault-induced permanent ground displacement has a devastating effect on structures in addition to damage caused by wave...  相似文献   

Separation of magnetic anomalies into induced and remanent magnetization contributions     

Jamaledin Baniamerian  Shuang Liu  Xiangyun Hu  Maurizio Fedi  Mahak Singh Chauhan  Mahmoud Ahmed Abbas 《Geophysical Prospecting》2020,68(7):2320-2342

Inversion of magnetic data is complicated by the presence of remanent magnetization, and it provides limited information about the magnetic source because of the insufficiency of data and constraint information. We propose a Fourier domain transformation allowing the separation of magnetic anomalies into the components caused by induced and remanent magnetizations. The approach is based on the hypothesis that each isolated source is homogeneous with a uniform and specific Koenigsberger ratio. The distributions of susceptibility and remanent magnetization are subsequently recovered from the separated anomalies. Anomaly components, susceptibility distribution and distribution of the remanent and total magnetization vectors (direction and intensity) can be achieved through the processing of the anomaly components. The proposed method therefore provides a procedure to test the hypotheses about target source and magnetic field, by verifying these models based on available information or a priori information from geology. We test our methods using synthetic and real data acquired over the Zhangfushan iron-ore deposit and the Yeshan polymetallic deposit in eastern China. All the tests yield favourable results and the obtained models are helpful for the geological interpretation.  相似文献   

Lithology-dependent seismic anisotropic amplitude variation with offset correction in transversely isotropic media     

Amir Abbas Babasafari  Deva Prasad Ghosh  Ahmed Mohammed Ahmed Salim  Masoumeh Kordi 《Geophysical Prospecting》2020,68(8):2471-2493

Analysis of amplitude variation with offset is an essential step for reservoir characterization. For an accurate reservoir characterization, the amplitude obtained with an isotropic assumption of the reservoir must be corrected for the anisotropic effects. The objective is seismic anisotropic amplitude correction in an effective medium, and, to this end, values and signs of anisotropic parameter differences (Δδ and Δε) across the reflection interfaces are needed. These parameters can be identified by seismic and well log data. A new technique for anisotropic amplitude correction was developed to modify amplitude changes in seismic data in transversely isotropic media with a vertical axis of symmetry. The results show that characteristics of pre-stack seismic data, that is, amplitude variation with offset gradient, can be potentially related to the sign of anisotropic parameter differences (Δδ and Δε) between two layers of the reflection boundary. The proposed methodology is designed to attain a proper fit between modelled and observed amplitude variation with offset responses, after anisotropic correction, for all possible lithofacies at the reservoir boundary. We first estimate anisotropic parameters, that is, δ and ε, away from the wells through Backus averaging of elastic properties resulted from the first pass of isotropic pre-stack seismic inversion, on input data with no amplitude correction. Next, we estimate the anisotropic parameter differences at reflection interfaces (values and signs of Δδ and Δε). We then generate seismic angle gather data after anisotropic amplitude correction using Rüger's equation for the P-P reflection coefficient. The second pass of isotropic pre-stack seismic inversion is then performed on the amplitude-corrected data, and elastic properties are estimated. Final outcome demonstrates how introduced methodology helps to reduce the uncertainty of elastic property prediction. Pre-stack seismic inversion on amplitude-corrected seismic data results in more accurate elastic property prediction than what can be obtained from non-corrected data. Moreover, a new anisotropy attribute (ν) is presented for improvement of lithology identification.  相似文献   

Predicting groundwater level of wells in the Diyala River Basin in eastern Iraq using artificial neural network          下载免费PDF全文

Abdulrahman Th Mohammad  Qassem H Jalut  Nadia L Abbas 《地下水科学与工程》2020,8(1):87-96

Al-Mansourieh zone is a part of Al-Khalis City within the province of Diyala and located in the Diyala River Basin in eastern Iraq with a total area about 830 km2.Groundwater is the main water source for agriculture in this zone.Random well drilling without geological and hydraulic information has led the most of these wells to dry up quickly.Therefore,it is necessary to estimate the levels of groundwater in wells through observed data.In this study,Alyuda NeroIntelligance 2.1 software was applied to predict the groundwater levels in 244 wells using sets of measured data.These data included the coordinates of wells(x,y),elevations,well depth,discharge and groundwater levels.Three ANN structures(5-3-3-1,5-10-10-1 and 5-11-11-1)were used to predict the groundwater levels and to acquire the best matching between the measured and ANN predicted values.The coefficient of correlation,coefficient determination(R2)and sum-square error(SSE)were used to evaluate the performance of the ANN models.According to the ANN results,the model with the three structures has a good predictability and proves more effective for determining groundwater level in wells.The best predictor was achieved in the structure 5-3-3-1,with R2 about 0.92,0.89,0.84 and 0.91 in training,validation,testing and all processes respectively.The minimum average error in the best predictor is achieved in validation and testing processes at about 0.130 and 0.171 respectively.On the other hand,the results indicated that the model has the potential to determine the appropriate places for drilling the wells to obtain the highest level of groundwater.  相似文献   

Geochemical Prospectivity Mapping Through a Feature Extraction–Selection Classification Scheme     

Zekri  Hamid  Cohen  David R.  Mokhtari  Ahmad Reza  Esmaeili  Abbas 《Natural Resources Research》2019,28(3):849-865

Natural Resources Research - Machine learning (ML) schemes can enhance success in geochemical prospectivity mapping. This study has examined the effectiveness of several feature extraction or...  相似文献   

Interior solutions of fluid sphere in f(R,T) gravity admitting conformal killing vectors     

M. Zubair  I. H. Sardar  F. Rahaman  G. Abbas 《Astrophysics and Space Science》2016,361(7):238

  相似文献   

Empirical assessment of rockfall and debris flow risk along the Karakoram Highway,Pakistan     

Ali  Sajid  Haider  Rashid  Abbas  Wahid  Basharat  Muhammad  Reicherter  Klaus 《Natural Hazards》2021,106(3):2437-2460

Natural Hazards - The Karakoram Highway links north Pakistan with southwest China. It passes through unique geomorphological, geological and tectonic setting. This study focused 200-km-long section...  相似文献   

Investigation of Failed Slopes Based on a New Method of Back Analysis in Rock Masses: A Case Study     

Taherynia  Mohammad Hossein  Koopialipoor  Mohammadreza  Azizzadeh  Abbas  Fahimifar  Ahmad  Ghyasvand  Soheil 《Geotechnical and Geological Engineering》2021,39(7):5119-5133

Geotechnical and Geological Engineering - Small variation in shear strength parameters results in remarkable changes in the safety factor (SF) of a rock slope. In this regard, rock mass strength of...  相似文献   

Paleoenvironmental reconstruction using biological markers for the Upper Triassic-Middle Jurassic sedimentary succession in Tabas Basin, central Iran     

Alizadeh BahramAlipour Majid  Hosseini S. HossienJahangard A. Abbas 《Organic Geochemistry》2011,42(4):431-437

The Upper Triassic-Middle Jurassic sedimentary succession in the Tabas Basin, with a thickness of about 1600 m, provides a case showing geochemical property changes through the Triassic-Jurassic boundary. The studied section (Kamarmacheh Kuh) is composed of the marine Nayband Formation (Norian-Rhaetian) overlain by siliciclastic sediments of Ab-e-Haji Formation (Lower Jurassic-Aalenian). Detailed geochemical analyses were conducted on selected samples from both formations and the results were used to infer paleo-depositional conditions. Most of the studied samples contain <1 wt% TOC composed mostly of oxidized organic matter with insignificant generative potential. Extract analysis of four representative samples indicate that the rocks also contain minor amounts of preserved algal organic matter along with a secondary contribution of higher plant organic matter from the adjacent watershed. Biomarker analyses show subtle variations in the relative contribution of land plant material that are consistent with the widespread occurrence of coal seams in the upper parts of the Nayband and basal parts of the Ab-e-Haji formations. Although the samples from the Kamarmacheh Kuh Section have low source potential, the extractable hydrocarbons indicate that conditions existed that were conducive to organic matter preservation and that regions of the Tabas Basin with higher primary productivity or lower sedimentation rates may have greater potential.  相似文献   

Spectrophotometric Determination of Cationic Surfactants Based on Their Effect on the Complexes of Chrome Azurol S with Be2+ and Al3+ Cations     

Abbas Afkhami  Davood Nematollahi  Tayyebeh Madrakian  Mitra Hajihadi 《洁净——土壤、空气、水》2011,39(2):171-176

Simple, rapid, and sensitive spectrophotometric methods have been proposed for the determination of cationic surfactants (CS) as cetyltrimethylammonium bromide (CTAB), dodecyltrimethylammonium (DTAB), and cetylpyridinium bromide (CPB). The methods are based on the effects of CSs on the complexes of Al³⁺ and Be²⁺ with Chrome Azurol S (CAS). The optimum reaction conditions such as CAS concentration, metal ion concentration, and pH have been studied and found to be 2.0 × 10^?4 mol L^?1 CAS, 0.5 mg L^?1 Al³⁺ or 0.4 mg L^?1 Be²⁺ and pH 5.4. The analytical characteristics of the methods such as limit of detections, limit of quantifications, and linear ranges have been obtained. CTAB, CPB, and DTAB could be determined by the Al–CAS complex in the ranges of 0.50–40.00, 0.20–10.00, and 0.40–10.00 µmol L^?1, and for the Be–CAS complex in the ranges of 0.08–5.00, 0.08–3.00, and 0.20–6.00 µmol L^?1, respectively. The limit of the detections of the method for the determination of CTAB, CPB, and DTAB for the Be–CAS complex has been found as 0.025, 0.024, and 0.061 µmol L^?1, respectively. The interfering effect of some anions and cations was also tested. The method was applied to the determination of CS CTAB in conditioner shampoo and water samples.  相似文献