Alteration,Chemical Processes,and Parent Rocks of Haléo-Danielle Plateau Bauxite,Adamawa–Cameroon     

Nyamsari  D. G.  Yalçin  M. G.  Wolfson  I. 《Lithology and Mineral Resources》2020,55(3):231-243

Lithology and Mineral Resources - The Haléo-Danielle Plateau bauxite deposit forms the largest part of the 15 km long Minim-Martap Bauxite ore district in the Adamawa Region of Cameroon. The...  相似文献   

建筑物侧面轮廓线约束的高分辨率遥感影像建筑物高度估算方法     

陈辉  张卡  宿东  王蓬勃 《测绘通报》2019,(9):34-37,72

针对现有利用阴影长度法提取建筑物高度时存在的阴影间相互遮挡问题，提出了一种基于建筑物侧面轮廓线进行建筑物高度估算的新方法。首先，利用RPC模型计算建筑物像点位移的方向与卫星成像角度，再将遥感影像进行旋转，使建筑物像点位移沿水平方向；然后，利用Canny算法进行轮廓检测，并构建一定长度的矩形形态学结构元素，对轮廓图像进行形态学开运算，以提取侧面轮廓线，再利用Hough变换与建筑物角点约束，对所提取的轮廓线进一步筛选；最后，根据卫星侧视成像时建筑物高度与像点位移的几何关系进行建筑物的高度估算。利用实际的高分辨率卫星影像对本文方法进行了验证，并与阴影法估算建筑物高度进行了对比。试验结果证明，利用建筑物侧面轮廓线进行建筑物高度估算平均误差可以达到0.7 m，且实际精度优于使用阴影法进行建筑物高度估算。  相似文献   

Studying Resource-Dependent Communities Through a Social-Ecological Lens? Examining Complementarity with Existing Research Traditions in Canada     

Sara Teitelbaum  Annie Montpetit  Jean-François Bissonnette  Clément Chion  Guy Chiasson  Frédérik Doyon 《社会与自然资源》2019,32(1):93-112

This article explores the suitability of Ostrom and colleagues' social-ecological systems framework (SESF) for the study of resource-dependent communities in Canada. Through a broad literature about resource-dependent communities in Canada, three main approaches are identified, named staples research, rural development, and sustainability studies. Each of these research traditions is analyzed with regards to a common set of criteria – focus, scale, methods, treatment of institutions, and treatment of environmental dimensions. Research in each category is compared and contrasted with the SESF approach, to identify areas of overlap and divergence. Results indicate that the SESF is unlikely to provide additional benefit in terms of in-depth of social analysis, however, it does provide a unique contribution in terms of its coupled approach to conceiving social and ecological systems and its ability to operationalize these relationships through structured variables.  相似文献   

A multiscale work-analysis approach for geotechnical structures     

Hao Xiong  Zhen-Yu Yin  François Nicot 《国际地质力学数值与分析法杂志》2019,43(6):1230-1250

This paper presents a second-order work analysis in application to geotechnical problems by using a novel effective multiscale approach. To abandon complicated equations involved in conventional phenomenological models, this multiscale approach employs a micromechanically-based formulation, in which only four parameters are involved. The multiscale approach makes it possible a coupling of the finite element method (FEM) and the micromechanically-based model. The FEM is used to solve the boundary value problem (BVP) while the micromechanically-based model is utilized at the Gauss point of the FEM. Then, the multiscale approach is used to simulate a three-dimensional triaxial test and a plain-strain footing. On the basis of the simulations, material instabilities are analyzed at both mesoscale and global scale. The second-order work criterion is then used to analyze the numerical results. It opens a road to interpret and understand the micromechanisms hiding behind the occurrence of failure in geotechnical issues.  相似文献   

Dynamical system analysis of a five-dimensional cosmological model     

A. Savaş Arapoğlu  Ezgi Yalçınkaya  A. Emrah Yükselci 《Astrophysics and Space Science》2018,363(10):215

A five-dimensional cosmological model including a single perfect fluid is studied in the framework of dynamical system analysis. All the critical points of the system are listed with their stability properties and some representative phase diagrams are explicitly shown. It is found that the stabilization of extra dimension is possible and the observed flatness of the three-dimensional space is provided for certain ranges of the equation of state parameter of the fluid. The model suggested here can be considered as a simplified model for examining the possible effects of the extra dimensions in the early universe.  相似文献   

Salinity Distribution at Canal Istanbul and Its Possible Impacts on the Northern Marmara Sea     

Saçu  Şehriban  Erdik  Tarkan  Şen  Olgay 《中国海洋工程》2020,34(6):881-888

China Ocean Engineering - Turkey has announced its plan to construct a new waterway, Canal Istanbul, parallel to the Bosphorus. In this study, the influence of Canal Istanbul on salinity...  相似文献   

Image-aided platform orientation determination with a GNSS/low-cost IMU system using robust-adaptive Kalman filter     

Wenlin Yan  Luísa Bastos  José A. Gonçalves  Américo Magalhães  Tianhe Xu 《GPS Solutions》2018,22(1):12

The availability of miniaturized sensors with enhanced capabilities, new methods for image processing, and easy access to small and low-weight airborne platforms for data acquisition, including unmanned vehicles, opens new possibilities for geodetic navigation applications and developing new developments in sensor fusion. In this context, the development of efficient methods, based on low-cost sensors, to extract precise georeferenced information from digital cameras is of utmost interest. We present a method to improve the performance of the integration of GNSS/low-cost IMU by exploiting the orientation changes retrieved from digital images. In this work, a robust-adaptive Kalman filter is also introduced to further improve the performance of the method deployed. The adaptive factor and the robust factor accomplished are determined by innovation information and the threshold value of orientation changes between consecutive images. Results from airborne tests used to assess the performance of the method are presented. The results show that using a non-metric camera, the Euler angle estimation accuracy of the GNSS/low-cost IMU integration can be improved to be close to 0.5 degree and an additional improvement, which can reach 59%, can be achieved after using the robust-adaptive Kalman filter.  相似文献   

Hydrochemical,isotopic, and reservoir characterization of the Pasinler (Erzurum) geothermal field,eastern Turkey     

Esra Hatipoğlu Temizel  Fatma Gültekin 《Arabian Journal of Geosciences》2018,11(1):3

The reservoir temperature and conceptual model of the Pasinler geothermal area, which is one of the most important geothermal areas in Eastern Anatolia, are determined by considering its hydrogeochemical and isotope properties. The geothermal waters have a temperature of 51 °C in the geothermal wells and are of Na–Cl–HCO₃ type. The isotope contents of geothermal waters indicate that they are of meteoric origin and that they recharge on higher elevations than cold waters. The geothermal waters are of immature water class and their reservoir temperatures are calculated as 122–155 °C, and their cold water mixture rate is calculated as 32%. According to the δ¹³C_VPDB values, the carbon in the geothermal waters originated from the dissolved carbon in the groundwaters and mantle-based CO₂ gases. According to the δ³⁴S_CDT values, the sources of sulfur in the geothermal waters are volcanic sulfur, oil and coal, and limestones. The sources of the major ions (Na⁺, Ca²⁺, Mg²⁺, Cl^?, and HCO₃ ^?) in the geothermal waters are ion exchange and plagioclase and silicate weathering. It is determined that the volcanic rocks in the area have effects on the water chemistry and elements like Zn, Rb, Sr, and Ba originated from the rhyolite, rhyolitic tuff, and basalts. The rare earth element (REE) content of the geothermal waters is low, and according to the normalized REE diagrams, the light REE are getting depleted and heavy REE are getting enriched. The positive Eu and negative Ce anomalies of waters indicate oxygen-rich environments.  相似文献   

Soil wettability in ground engineering: fundamentals,methods, and applications     

S. D. N. Lourenço  Y. Saulick  S. Zheng  H. Kang  D. Liu  H. Lin  T. Yao 《Acta Geotechnica》2018,13(1):1-14

Wettability is a fundamental property controlling the extent of wetting in flat and granular solids. In natural soils, wettability affects a wide variety of processes including infiltration, preferential flow and surface runoff. In mineral processing, wettability is paramount in enhancing the efficiency of separation of minerals from gangue. The manipulation of surface wettability is equally crucial in many industrial applications. For instance, superhydrophobic surfaces are those on which water drops roll off easily and as such are used for self-cleaning applications. Therefore, while wettability is strongly cross-disciplinary, its evolution has been discipline-specific with a direct extrapolation or transfer of concepts, approaches, and methods to ground engineering unlikely to remain valid. This paper synthesizes relevant aspects from surface chemistry, materials science, mining engineering, and soil science, and discusses their implications within the context of new granular materials that resist wetting, for use in barriers or ground improvement and, in unsaturated soils, where the effects of wettability have been documented.  相似文献   

Teleseismic finite-fault inversion of two <Emphasis Type="Italic">M</Emphasis><Subscript>w</Subscript> = 6.4 earthquakes along the East Anatolian Fault Zone in Turkey: the 1998 Adana and 2003 Bingöl earthquakes     

Murat Utkucu  Emrah Budakoğlu  Meltem Çabuk 《Arabian Journal of Geosciences》2018,11(22):721

The East Anatolian Fault Zone is a continental transform fault accommodating westward motion of the Anatolian fault. This study aims to investigate the source properties of two moderately large and damaging earthquakes which occurred along the transform fault in the last two decades using the teleseismic broadband P and SH body waveforms. The first earthquake, the 27 June 1998 Adana earthquake, occurred beneath the Adana basin, located close to the eastern extreme of Turkey’s Mediterranean coast. The faulting associated with the 1998 Adana earthquake is unilateral to the NE and confined to depths below 15 km with a length of 30 km along the strike (53°) and a dipping of 81° SE. The fixed-rake models fit the data less well than the variable-rake model. The main slip area centered at depth of about 27 km and to the NE of the hypocenter, covering a circular area of 10 km in diameter with a peak slip of about 60 cm. The slip model yields a seismic moment of 3.5?×?10¹⁸ N-m (M_w???6.4). The second earthquake, the 1 May 2003 Bingöl earthquake, occurred along a dextral conjugate fault of the East Anatolian Fault Zone. The preferred slip model with a seismic moment of 4.1?×?10¹⁸ N-m (M_w???6.4) suggests that the rupture was unilateral toward SE and was controlled by a failure of large asperity roughly circular in shape and centered at a depth of 5 km with peak displacement of about 55 cm. Our results suggest that the 1998 Adana earthquake did not occur on the mapped Göksun Yakap?nar Fault Zone but rather on a SE dipping unmapped fault that may be a split fault of it and buried under the thick (about 6 km) deposits of the Adana basin. For the 2003 Bingöl earthquake, the final slip model requires a rupture plane having 15° different strike than the most possible mapped fault.  相似文献