排序方式： 共有35条查询结果，搜索用时 15 毫秒
1.
This paper will discuss the computerised development control and approval system being developed for the Planning and Development Control Department, City Hall of Kuala Lumpur, with stress on the GIS architecture developed within the system. The prospects and challenges towards implementation of the system are also discussed. 相似文献
2.
ABSTRACTThe Integrated Water Flow Model (IWFM), developed by the California Department of Water Resources, is an integrated hydrological model that simulates key flow processes including groundwater flows, streamflow, stream–aquifer interactions, rainfall–runoff and infiltration. It also simulates the agricultural water demand as a function of soil, crop and climatic characteristics, as well as irrigation practices, and allows the user to meet these demands through pumping and stream diversions. This study investigates the modelling performance of the groundwater module of IWFM using several hypothetical test problems that cover a wide range of settings and boundary conditions, by comparing the simulation results with analytical solutions, field and laboratory observations, or with results from MODFLOW outputs. The comparisons demonstrate that IWFM is capable of simulating various hydrological processes reliably.
EDITOR M.C. Acreman; ASSOCIATE EDITOR A. Efstratiadis 相似文献
3.
The effect of welding degree on geotechnical properties of an ignimbrite flow unit: the Bitlis castle case (eastern Turkey) 总被引：1，自引：0，他引：1
Tamer Koralay Mehmet ?zkul Halil Kumsar Sefer Beran ?elik Kadir Pekta? 《Environmental Earth Sciences》2011,64(3):869-881
Ignimbrites are associated with nearly most of the world’s volcanoes and are defined as a deposit from pyroclastic density
currents. They consist predominantly of pumiceous lapilli and blocks, and glass shards, which shows evidence of having been
emplaced as a concentrated hot and dry particulate flow. These rocks are widely used as building stone especially in ancient
buildings. Bitlis valley is covered by ignimbritic products, derived from Nemrut stratovolcano, one of the significant volcanic
centers in Eastern Anatolia. The Bitlis ignimbrite is separated into lower level (LL), middle level (ML) and upper level (UL)
according to color, welding degree and structural features. All three levels were used extensively in many parts of the Bitlis
castle as masonry materials. Studies were carried out on mineralogical and geochemical composition and on physical and mechanical
properties of the ignimbrites. In addition, a freeze–thaw cycle test was executed. There are no considerable differences in
mineralogical composition among the levels of ignimbrite. All levels contain plagioclase, sanidine, pyroxene, and opaque mineral.
In addition, anorthoclase and quartz are seen. In general, the LL of ignimbrite shows relic perlitic and eutaxitic texture,
whereas eutaxitic and vesicular texture are commonly developed in the ML and UL, respectively. Lower, middle, and upper level
ignimbrite samples display similar and limited compositional spread in terms of major oxide elements. They have trachyte composition.
Building stones can be classified according to mineralogy, mechanical and physical properties and processing types. Mechanical
and physical properties are very important with respect to stone quality/durability. The mechanical and physical properties
of the ignimbrites are controlled by the welding degree. It was found that increasing welding degree from UL to LL correlates
with increasing density, compressive strength and slake durability index and with decreasing porosity. The Bitlis ignimbrites
have turned out as susceptible to freeze–thaw cycles. 相似文献
4.
Hassan Abdul Kadir Saleh Prof. 《GeoJournal》1990,21(4):337-348
This paper focuses on the process of Jewish settlement in the West Bank and its economic consequences in the period from 1967 to the outbreak of the Intifada late in 1987. It attempts to show that this process is the practical application of Israeli objectives which are based on expansion and occupation of neighbouring Arab lands, facilitated by the fashioning of a dual or bifurcate economy there.After the war of June 1967, Israeli occupation authorities started to draw up plans with a view to settling Jews in the West Bank. There has been an increase in the numbers of settlements and settlers, estimated at 122 and 52,000 respectively in 1987. The pattern of settlement distribution is randomly dispersed, although it is concentrated in a region located to the NW of Jerusalem. The settlement began in the Jordan valley and extended gradually westward in the highlands.Jewish settlement has affected economic development of the West Bank, where there were many constraints on Arab agriculture and industry. Inequality is evident between settlers and Palestinians in an economy that has been structurally bifurcated: although settlers represent about 3% of total population of the West Bank, their economic activity constitutes at least 35% of the GDP of the West Bank. 相似文献
5.
Selahattin Kadir A. Piril Önen-Hall S. Nihal Aydin Cengiz Yakicier Nurten Akarsu Murat Tuncer 《Environmental Geology》2008,54(2):391-409
The Cretaceous-Eocene volcano-sedimentary units of the Zonguldak region of the western Black Sea consist of subalkaline andesite
and tuff, and sandstone dominated by smectite, kaolinite, accessory chlorite, illite, mordenite, and analcime associated with
feldspar, quartz, opal-CT, amphibole, and calcite. Kaolinization, chloritization, sericitization, albitization, Fe–Ti-oxidation,
and the presence of zeolite, epidote, and illite in andesitic rocks and tuffaceous materials developed as a result of the
degradation of a glass shards matrix, enclosed feldspar, and clinopyroxene-type phenocrysts, due to alteration processes.
The association of feldspar and glass with smectite and kaolinite, and the suborientation of feldspar-edged, subparallel kaolinite
plates to fracture axes may exhibit an authigenic smectite or kaolinite. Increased alteration degree upward in which Al, Fe,
and Ti are gained, and Si, Na, K, and Ca are depleted, is due to the alteration following possible diagenesis and hydrothermal
activities. Micromorphologically, fibrous mordenite in the altered units and the presence of needle-type chrysotile in the
residential buildings in which cancer cases lived were detected. In addition, the segregation pattern of cancer susceptibility
in the region strongly suggested an environmental effect and a genetic influence on the increased cancer incidence in the
region. The most likely diagnosis was Li-Fraumeni syndrome, which is one of the hereditary cancer predisposition syndromes;
however, no mutations were observed in the p53 gene, which is the major cause of Li-Fraumeni syndrome. The micromorphology
observed in the altered units in which cancer cases were detected may have a role in the expression of an unidentified gene,
but does not explain alone the occurrence of cancer as a primary cause in the region. 相似文献
6.
The overall performance of ships depends on the seakeeping performance in specified sea areas where the vessel is designed to operate. The seakeeping performance procedure is based upon the probability of exceeding specified ship motions in a sea environment particular to the vessel's mission. Given the operational area of the vessel, the percentage of time the vessel operates in a particular sea state can be determined from an oceanographic database through application of the response amplitude operators. The predicted motions are compared to the motion limiting criteria to obtain the operability indices. However, the operability indices are strongly affected by the chosen limiting criteria. This is particularly the case for passenger vessels where many conflicting criteria are used to assess the effect of motions and accelerations on comfort and well-being of passengers. This paper investigates the effect of seakeeping criteria on seakeeping performance assessment for passenger vessels. Conventional seakeeping performance measures are evaluated for various levels of vertical accelerations defined by the ISO 2631 standard. It is shown that the estimated seakeeping performance of a passenger vessel greatly depends on the level of limiting value selected as the seakeeping criteria. 相似文献
7.
An open problem that arises when using modern iterative linear solvers, such as the preconditioned conjugate gradient method or Generalized Minimum RESidual (GMRES) method, is how to choose the residual tolerance in the linear solver to be consistent with the tolerance on the solution error. This problem is especially acute for integrated groundwater models, which are implicitly coupled to another model, such as surface water models, and resolve both multiple scales of flow and temporal interaction terms, giving rise to linear systems with variable scaling. This article uses the theory of "forward error bound estimation" to explain the correspondence between the residual error in the preconditioned linear system and the solution error. Using examples of linear systems from models developed by the US Geological Survey and the California State Department of Water Resources, we observe that this error bound guides the choice of a practical measure for controlling the error in linear systems. We implemented a preconditioned GMRES algorithm and benchmarked it against the Successive Over-Relaxation (SOR) method, the most widely known iterative solver for nonsymmetric coefficient matrices. With forward error control, GMRES can easily replace the SOR method in legacy groundwater modeling packages, resulting in the overall simulation speedups as large as 7.74×. This research is expected to broadly impact groundwater modelers through the demonstration of a practical and general approach for setting the residual tolerance in line with the solution error tolerance and presentation of GMRES performance benchmarking results. 相似文献
8.
This paper will discuss the computerised development control and approval system being developed for the Planning and Development Control Department. City Hall of Kuala Lumpur, with stress on the GIS architecture developed within the system. The prospects and challenges towards implementation of the system are also discussed. 相似文献
9.
10.
Rene Forsbergbi Arne Vestergaard Olesen Adel Alshamsi Arne Gidskehaug Sahrum Ses Majid Kadir 《Marine Geodesy》2013,36(3):221-232
The Military Survey Department (MSD) of the United Arab Emirates (UAE) undertook an airborne gravity survey project for the marine area of the country in 2009, especially to strengthen the marine and coastal geoid in the near-shore regions. For the airborne gravity survey, 5 km spacing coast-parallel flight lines were planned and surveyed. These lines were supplemented by cross-lines in order to assess the quality of the airborne gravity surveys. The flight lines were extended 10 km, spacing lines further offshore. A Beech King Air 350 aircraft was used for the surveys, collecting data at a typical flight speed of 170 knots and a typical flight elevation of 900–1500 m, depending on weather conditions and topography. Gravity was measured with a ZLS-modified LaCoste and Romberg gravimeter (S-99), augmented with a Honeywell strap-down inertial navigation system unit. The estimated accuracy for the airborne gravity data is better than 2.0 mGal r.m.s., as judged from the airborne track crossovers. The new airborne gravimetry data changed the UAE coastal geoid by up to 30 cm in some regions, highlighting the importance of airborne gravity coastal surveys. 相似文献