排序方式: 共有48条查询结果,搜索用时 0 毫秒
1.
应用经CSPM法和黎曼解修正后的光滑粒子流体动力学(SPH)方法,建立了主动吸收无反射数值波浪水槽,研究波浪作用下多孔介质结构的水动力特性。流体运动控制方程采用N-S方程,多孔渗水结构内流体的运动控制方程考虑渗流力的影响。数值计算结果给出了水槽内不同位置测点的波面历时曲线和越浪量随时间变化曲线,并同试验结果和Philip Liu的数值计算结果进行了比较。并对一个波浪周期内斜坡堤多孔介质结构内外的速度场和压力分布进行了讨论分析。计算分析表明,数值计算波面较Philip Liu的计算结果与试验结果吻合更好。说明应用SPH方法建立的二维数学模型能够较好地模拟破碎波在多孔渗水斜坡上的爬坡和越浪。 相似文献
2.
Experimental Investigation of Instantaneous Properties of Wave Slamming on the Plate 总被引:1,自引:0,他引:1
The purpose of this paper is to investigate the instantaneous properties of wave slamming on the plate structure of an open structure.The advanced instantaneous measuring technique-Particle Image Velocimetry(PIV) is applied to acquire the instantaneous velocity field of wave slamming.From the cross-correlation analysis results of the images captured by the CCD camera,the flow fields of wave impacting on the structure are displayed visually,and the instantaneous whole-field fluid velocity vectors are obtained.The relation between the instantaneous peak impacting pressures and the instantaneous velocities of water particles is studied by probability analysis. 相似文献
3.
The analytical method (AM) for separation of composite waves is presented based on the Hilbert transform. It is ap-plicable to both regular and irregular trains of waves. The wave data series measured with two wave gauges in the experi-ments are separated into two series of incident and reflected waves. Then, the reflection coefficient can be easily ob-tained. The arrival of reflected waves can also be detected for improveraent of the accuracy of the reflection coefficient. The reflection performance of the physical model can be estimated exactly without calculation of wave height and phase difference. Numerical samples developed to test the method are proved to be accurate. Physical experiments are conduct-ed and compared with Goda s method and satisfactory results are obtained. 相似文献
4.
1 .IntroductionTomeasurethereflectionofincidentwavesproducedbyaphysicalmodelinawaveflumeisacommonproblemwithphysicaltestsofwaveactiononcoastalstructures .Wavesgeneratedbythewave makerpropagateforwardinthewaveflumeandarereflectedbythephysicalmodel,andthe… 相似文献
5.
分离入射波与反射波的解析方法 总被引:5,自引:0,他引:5
提出了一种新的分离入射波和反射波的解析方法(AM)。利用两点处的 波高信息,运用Hilbert变换得到波浪信号在复域内的解析表达式,不需要计算合成波高和相位差即可实现信号的分离。根据分离结果,可以精确地估计入射波与反射波的幅值以及反射系数等参数,能够获得入射波与反射波之间的相位信息,并且可方便地用于不规则波的分离。文中通过数值模拟与物理模型实验对AM法进行了检验,所得的结果与实际值非常吻合。 相似文献
6.
半圆型结构冰压力的物理模拟试验研究 总被引:4,自引:0,他引:4
利用DUT—1非冻结合成模型冰开展1:25冰对半圆型构件的物理模拟试验研究。首先用简单的斜面构件的物理模拟试验检验了整体试验装置和技术设备的可靠性,然后以同样比尺进行2种冰厚在5个不同水位条件的系列试验,获得了模型冰排在半圆型构件前的破碎堆积现象和作用于构件上的水平和垂直作用力过程,结合实测模型冰物理和力学指标,通过优化组合,拟合出半圆型防波堤冰荷载的试验公式,这些公式包含了冰对半圆型结构的弯曲破坏作用力、挤压破坏作用力及爬坡和堆积作用力。 相似文献
7.
8.
9.
依据渤海海冰物理和力学特征值和国内水池实验室能力,以1:10~1:30比尺要求,发展了DUT-1合成模型冰.文中简介该模型冰的理想参数、成分和制备过程.就其弯曲强度和弹性模量进行系统的实验分析.通过500多次弯曲实验,获得该模型冰在不同加载速度下的破坏方式,各向同性证据和弯曲强度为35~65kPa和弹性模量平均53MPa的结果.并且得到弯曲强度和弹性模量在实测湿密度范围内呈递增关系,浸水模型冰性能稳定时间超过4h,弹性模量与弯曲强度之比82%超过2000. 相似文献
10.