Plant diversity and community structure of Brazilian <Emphasis Type="Italic">Páramos</Emphasis>     

Prímula Viana Campos  Pedro Manuel Villa  Jaquelina Alves Nunes  Carlos E.G.R. Schaefer  Stefan Porembski  Andreza Viana Neri 《山地科学学报》2018,15(6):1186-1198

In Eastern South America, high altitude grasslands represent a mountain system that has a high number of endemic species. However, studies on the ecology of plant communities in these environments remain scarce. We aimed to evaluate the patterns of biodiversity and structure of plant communities from rocky outcrops in high altitude grasslands of three areas at the Caparaó National Park, southeastern Brazil, by sampling 300 randomly distributed plots. Then, we compared the floristic composition, relative abundance, and biological and vegetation spectra among areas. We classified species as endemic and non-endemic and verified the occurrence of endangered species. Species richness was evaluated by rarefaction analysis on the sampling units. The importance value and species abundance distribution (SAD) models were assessed. We also performed an indicator species analysis. We sampled 58 species belonging to 49 genera and 32 families. The number of species decreased with increasing altitude, with significant differences being observed among areas regarding richness, abundance, and cover. Of the total number of species, 10 are endemic to the Caparaó National Park and 17 are listed on the Brazilian Red List of endangered species. The dominant families on all peaks were Asteraceae and Poaceae. The SAD models showed lognormal and geometric distributions, corroborating the fact that 10 species that were common to all three areas were also the most dominant ones in the communities and showed the highest importance values, which ranged between 35% and 60%. Indicator species analysis revealed that 28 species (48.27%) were indicators. Of these, 42.85% had maximum specificity, meaning that they occurred only in one area. Thus, the number of species per life form ratio was similar among areas, yet vegetation spectra differed, especially for hemicryptophytes. The altimetric difference among the areas showed to be a very important driver in the community assembly, influencing the evaluated variables, however, other drivers as soil depth, slope and water could also influence the community structure on a smaller and local spatial scale.  相似文献   

Constraining the origin and evolution of confined turbidite systems: southern Cretan margin,Eastern Mediterranean Sea (34°30–36°N)     

Tiago M. Alves  Vasilios Lykousis  Dimitris Sakellariou  Stamatina Alexandri  Paraskevi Nomikou 《Geo-Marine Letters》2007,27(1):41-61

Bathymetric, 9.5-kHz long-range sidescan sonar (OKEAN), seismic reflection and sediment-core data are used in the analysis of two tectonic troughs south of Crete, Eastern Mediterranean Sea. Here, up to 1.2 s two-way travel time (TWTT) of strata have accumulated since the Middle Miocene in association with extension in the South Aegean region. The study area comprises >100-km- long by >25-km-wide basins filled by sediments subdivided into two seismic units: (1) an upper Unit 1 deposited in sub-basins which follow the present-day configuration of the southern Cretan margin; (2) a basal Unit 2, more than 500 ms (TWTT) thick, accumulated in deeper half-graben/grabens distinct from the present-day depocentres. Both units overlap a locally stratified Unit 3 comprising the pre-Neogene core complex of Crete and Gavdos. In this work, the interpreted seismic units are correlated with the onshore stratigraphy, demonstrating that denudation processes occurring on Crete and Gavdos in response to major tectonic events have been responsible for high sedimentation rates along the proximal southern Cretan margin. Consequently, topographically confined sedimentary units have been deposited south of Crete in the last 12 Ma, including turbidites and other mass-flow deposits fed by evolving transverse and axial channel systems. Surface processes controlling facies distribution include the direct inflow of sediment from alluvial-fan systems and incising mountain rivers onto the Cretan slope, where significant sediment instability processes occur at present. In this setting, seismic profiles reveal eight different types of stratigraphic contacts on basin-margin highs, and basinal areas show evidence of halokinesis and/or fluid escape. The acquired data also show that significant changes to the margin’s configuration occurred in association with the post-Alpine tectonic and eustatic episodes affecting the Eastern Mediterranean.  相似文献   

Sample treatment with focused ultrasound and bath sonication as a powerful tool for the evaluation of cadmium pollution in estuarine waters     

R. Agapito  S. Alves  J.L. Capelo  M.L. Gonalves  A.M. Mota 《Marine Chemistry》2006,98(2-4):286-294

A new sample treatment was developed for the determination of dissolved cadmium in Tagus estuarine waters, based on focused ultrasound in conjunction with small volumes in the extraction steps for Cd pre-concentration. Cadmium was first pre-concentrated using a classical approach (APDC as the complexing agent and MIBK as the organic phase) and then back-extracted into HNO₃ with the aid of focused ultrasound, which reduced the acid concentration by more than one order of magnitude (from 4 to 0.1 mol L^− 3). This sample treatment was accomplished in less than 5 min, using low sample volume (20 mL), and low-volume, low-concentration reagents. The pre-concentration factor used in this work was 25, but different sample/organic volume ratios may be used in order to increase that value. The limit of detection and the limit of quantification in Tagus water samples were 0.03 nmol L^− 1 and 0.1 nmol L^− 3, respectively. Recoveries from spiked Tagus water were higher than 90%. The procedure was validated using the reference estuarine water NRC-SLEW-3. In the solubilization of Cd particulate, bath ultrasonication was used in conjunction with HNO₃ + HCl, followed by H₂O₂, which took about 2 instead of the usual 12 h (cooling included) when high-pressure microwave digestion is used.  相似文献   

Holocene record of productivity in the NW Iberian continental shelf     

V. Alves Martins  C. Patinha  E. Ferreira da Silva  J.-M. Jouanneau  O. Weber  F. Rocha   《Journal of Geochemical Exploration》2006,88(1-3):408

A multiproxy approach (textural characteristics, heavy metal concentrations and benthic foraminifera data) was adopted to study the OMEX core KSGX 40, collected at the Galicia Mud Deposit (NW Iberian outer continental shelf) and recording the last ca. 4.8 ka cal BP. Geochemical profiles of Fe, Mn, Zn, Co, Cr, Cu, Ni, Pb, Al and Ca show significant temporal variations. Benthic foraminifera productivity proxy suggests that the recorded muddy events were contemporaneous of a higher C_org flux to the marine benthic environment. The higher flux of organic matter, following a long-term intensification of the upwelling and coinciding with a finer sedimentation, led to depressed levels of oxygen beneath the water-sediments interface and to early diagenetic processes of several redox-sensitive elements.  相似文献   

Microstructural evolution of the Seridó Belt, NE-Brazil: the effect of two tectonic events on development of c-axis preferred orientation in quartz     

Mrio Neto Cavalcanti de Araújo  Fernando Csar Alves da Silva  Emanuel Ferraz Jardim de S  Rodney J. Holcombe  Paulo Marcos de Vasconcelos 《Journal of Structural Geology》2003,25(12):2089-2107

The polyphase evolution of the Seridó Belt (NE-Brazil) includes D₁ crust formation at 2.3–2.1 Ga, D₂ thrust tectonics at 1.9 Ga and crustal reworking by D₃ strike-slip shear zones at 600 Ma. Microstructural investigations within mylonites associated with D₂ and D₃ events were used to constrain the tectono-thermal evolution of the belt. D₂ shear zones commenced at deeper crustal levels and high amphibolite facies conditions (600–650 °C) through grain boundary migration, subgrain rotation and operation of quartz c-prism slip. Continued shearing and exhumation of the terrain forced the re-equilibration of high-T fabrics and the switching of slip systems from c-prism to positive and negative a-rhombs. During D₃, enhancement of ductility by dissipation of heat that came from syn-D₃ granites developed wide belts of amphibolite facies mylonites. Continued shearing, uplift and cooling of the region induced D₃ shear zones to act in ductile-brittle regimes, marked by fracturing and development of thinner belts of greenschist facies mylonites. During this event, switching from a-prism to a-basal slip indicates a thermal path from 600 to 350 °C. Therefore, microstructures and quartz c-axis fabrics in polydeformed rocks from the Seridó Belt preserve the record of two major events, which includes contrasting deformation mechanisms and thermal paths.  相似文献   

Using a regional numerical weather prediction model for GNSS positioning over Brazil     

Daniele Barroca Marra Alves  Luiz Fernando Sapucci  Haroldo Antonio Marques  Eniuce Menezes de Souza  Tayná Aparecida Ferreira Gouveia  Jackes Akira Magário 《GPS Solutions》2016,20(4):677-685

The global navigation satellite system (GNSS) can provide centimeter positioning accuracy at low costs. However, in order to obtain the desired high accuracy, it is necessary to use high-quality atmospheric models. We focus on the troposphere, which is an important topic of research in Brazil where the tropospheric characteristics are unique, both spatially and temporally. There are dry regions, which lie mainly in the central part of the country. However, the most interesting area for the investigation of tropospheric models is the wet region which is located in the Amazon forest. This region substantially affects the variability of humidity over other regions of Brazil. It provides a large quantity of water vapor through the humidity convergence zone, especially for the southeast region. The interconnection and large fluxes of water vapor can generate serious deficiencies in tropospheric modeling. The CPTEC/INPE (Center for Weather Forecasting and Climate Studies/Brazilian Institute for Space Research) has been providing since July 2012 a numerical weather prediction (NWP) model for South America, known as Eta. It has yield excellent results in weather prediction but has not been used in GNSS positioning. This NWP model was evaluated in precise point positioning (PPP) and network-based positioning. Concerning PPP, the best positioning results were obtained for the station SAGA, located in Amazon region. Using the NWP model, the 3D RMS are less than 10 cm for all 24 h of data, whereas the values reach approximately 60 cm for the Hopfield model. For network-based positioning, the best results were obtained mainly when the tropospheric characteristics are critical, in which case an improvement of up to 7.2 % was obtained in 3D RMS using NWP models.  相似文献   

Determination of Suitable Pillar Size for Protecting Gas Well Drilled Through a Longwall Mining Abutment Pillar Using Numerical Modelling Approach: A Case Study     

Bali  Bonaventura Alves Mangu  Mishra  Brijes 《Geotechnical and Geological Engineering》2021,39(2):1329-1347

Gas well drilled through longwall mining abutment pillar could potentially face instability issue due to the strata deformation following longwall panel extraction. Therefore, it is imperative to adequately design the pillar size of a longwall mining in order to ensure the stability of the gas well penetrated longwall mining abutment pillar. In this paper, the determination of suitable pillar size for protecting gas well subjected to longwall mining operation was investigated. Two scenarios of longwall gateroad system including the three and four entry system with varying pillar sizes were assessed using numerical modelling approach. The results of this study indicate that the pillar geometry plays an important role on the vertical gas well stability. In addressing the suitable pillar size for the given case study considering three entry system, the suitable chain pillar and abutment pillar size were found to be 80 ft (24.4 m) wide by 120 ft (36.6 m) length and 104 ft (31.7 m) wide by 120 ft (36.6 m) length rib to rib, respectively. Whereas, if four entry system is used, the suitable chain pillar size is 48 ft (14.6) wide by 120 ft (36.6 m) length and the abutment pillar size is 104 ft (31.7 m) wide by 120 ft (36.6 m) length rib to rib. The proposed numerical modelling procedure presented in this paper can be a viable alternative and applied to other similar projects in order to determine an optimal pillar size for protecting gas well in longwall mining area.

  相似文献   

Polygonal mounds in the Barents Sea reveal sustained organic productivity towards the P–T boundary          下载免费PDF全文

Tiago M. Alves 《地学学报》2016,28(1):50-59

Three‐dimensional (3D) seismic‐reflection data from the Barents Sea show geometric similarities between Permian cool‐water mounds and older carbonate build‐ups. In detail, the Samson Dome area records the development of polygonal mounds in Upper Permian strata; at the same time, a gradual drowning event took place in the Barents Sea. The presence of these polygonal mounds is interpreted to reflect: (i) shallower conditions around the Samson Dome than in other parts of the Barents Sea; and (ii) earlier drowning of Upper Permian mounds towards the west and northwest into the Ottar Basin. Based on the recognition of mounds ~20 m below the Permian–Triassic stratigraphic boundary, this paper proposes for the first time that shallow areas of the Barents Sea, such as the Samson Dome, witnessed sustained organic productivity until the onset of the P–T extinction event.  相似文献   

Extension of the Paraná Basin to offshore Brazil: Implications for coalbed methane evaluation     

Michael Holz  Wolfgang Kalkreuth  Silvia Beatriz Alves Rolim 《Marine and Petroleum Geology》2010

Coalbed methane (CBM) is a worldwide exploration target of the petroleum industry. In Brazil, the most important coal-bearing succession is associated with the Permian Rio Bonito Formation of the Paraná Basin. The gas-prone areas are located at the southeastern margin of the Paraná Basin and possibly in the offshore region of the northern part of the Pelotas Basin. Coalfields end abruptly at the present day shoreline, a result of rifting of Gondwana and the evolution of the South Atlantic Ocean. All geologic indicators suggest that in pre-rift times the coal seams extended further eastwards, probably now lying deeply buried below the sedimentary succession of the Pelotas Basin. The present paper discusses structural, stratigraphic, seismic and aeromagenetic data that support the preservation of continental crust beneath ocean sediment. If the coal beds had similar lateral extent to known onshore coals, and coal beds extended across the projected extension of the Parana basin, and there was a conservative 5 m of cumulative coal thickness, then a potential methane volume can be estimated for this newly inferred resource. Average onshore coal gas content is 32 scf/ton (1.00 m³/ton). If this is similar in the offshore coal deposits, then the hypothetical methane volume in the offshore area could be in excess of 1.9 × 10¹² scf (56 × 10⁹ m³). Metamorphism from dikes associated with rifting are potential complicating factors in these deposits, and since no borehole reaching the deep-lying strata in the offshore area are available, this is a hypothetical gas resource with a certain level of uncertainty which should be tested in the future by drilling a deep borehole.  相似文献   

Pegmatite Emplacement in the Seridó Belt, Northeastern Brazil: Late Stage Kinematics of the Brasiliano Orogen     

M.N.C. Araújo  F.C. Alves da Silva  E.F. Jardim de S 《Gondwana Research》2001,4(1)

Geometric and kinematic analysis was performed in an area located in the central part of the Seridó Belt (NE Brazil), where supracrustal rocks affected by polyphase deformation are well exposed. The first event recognized in this area (and regionally known as the D₂ deformation) is characterized by top to the south thrust tectonics while a second one (D₃ deformation) is marked by upright folds, strike-slip or transpressive shear zones and the development of flower structures. Major pegmatite swarms were emplaced during and late as regards the second event (dated ca. 580 Ma), being part of the Brasiliano orogeny; similar dyke swarms are known from the Nigerian Shield. These pegmatite swarms provide reliable kinematic markers of the late evolutionary stage of the Neoproterozoic Trans-Sahara-Borborema collisional belt. Mineralogical, geometric and kinematic features support two stages of pegmatite emplacement during the strike-slip event: (i) older, syn-D₃ homogeneous pegmatites intruded mostly along lithological and structural discontinuities, such as foliation surfaces; (ii) late, D₃ heterogeneous pegmatites were emplaced along tension gashes and other dilation structures. The heterogeneous pegmatites are economically more important, being exploited for precious metals and stones, as well as industrial minerals.  相似文献