A non-coherent surface backscattering model for radar observation of planetary bodies and its application to Cassini radar altimeter     

E. Montefredini  F. Morelli  G. Picardi  R. Seu 《Planetary and Space Science》1995,43(12)

Mission and hardware constraints make the Cassini radar altimeter working in the beam limited or pulse limited mode dependent on the radar operative mode (Low and High Resolution, respectively), but never allows work in a condition such that the pulsewidth limited circle is much smaller than the beamwidth limited circle. Unfortunately this latter condition is vital for the application of the so-called Brown model widely and successfully used in Earth (ocean) observation missions where the quoted condition is really met. In the paper a new model is discussed which is based on the same general hypotheses of the Brown model but is worked out by means of a different approach which makes it more general and independent of the specific operative conditions. An extension of the new model to take into account large mispointing angles is considered as well based on a series expansion of the Bessel function and on the analysis of the truncation error. Finally a comparison with the classical Brown model is discussed too.  相似文献   

Holocene activity of the Scilla Fault, Southern Calabria: Insights from coastal morphological and structural investigations     

L. Ferranti  C. Monaco  D. Morelli  F. Antonioli  L. Maschio 《Tectonophysics》2008,453(1-4):74

Integration of on-land and offshore geomorphological and structural investigations coupled to extensive radiometric dating of co-seismically uplifted Holocene beaches allows characterization of the geometry, kinematics and seismotectonics of the Scilla Fault, which borders the eastern side of the Messina Strait in Calabria, Southern Italy. This region has been struck by destructive historical earthquakes, but knowledge of geologically-based source parameters for active faults is relatively poor, particularly for those running mostly offshore, as the Scilla Fault does. The  30 km-long normal fault may be divided into three segments of  10 km individual length, with the central and southern segments split in at least two strands. The central and northern segments are submerged, and in this area marine geophysical data indicate a youthful morphology and locally evidence for active faulting. The on-land strand of the western segment displaces marine terraces of the last interglacial (124 to 83 ka), but seismic reflection profiles suggest a full Quaternary activity. Structural data collected on bedrock faults exposed along the on-land segment provide evidence for normal slip and  NW-SE extension, which is consistent with focal mechanisms of large earthquakes and GPS velocity fields in the region. Detailed mapping of raised Holocene marine deposits exposed at the coastline straddling of the northern and central segments supplies evidence for two co-seismic displacements at  1.9 and  3.5 ka, and a possible previous event at  5 ka. Co-seismic displacements show a consistent site value and pattern of along-strike variation, suggestive of characteristic-type behaviour for the fault. The  1.5–2.0 m average co-seismic slips during these events document M_e  6.9–7.0 earthquakes with  1.6–1.7 ka recurrence time. Because hanging-wall subsidence cannot be included into slip magnitude computation, these slips reflect footwall uplift, and represent minimum average estimates. The palaeoseismological record based on the palaeo-shorelines suggests that the last rupture on the Scilla Fault during the February 6, 1783 M_w = 5.9–6.3 earthquake was at the expected time but it may have not entirely released the loaded stress since the last great event at  1.9 ka. Comparison of the estimated co-seismic extension rate based on the Holocene shoreline record with available GPS velocities indicates that the Scilla Fault accounts for at least  15–20% of the contemporary geodetic extension across the Messina Strait.  相似文献   

Cloning of a chub metallothionein cDNA and development of competitive RT-PCR of chub metallothionein mRNA as a potential biomarker of heavy metal exposure   总被引：3，自引：0，他引：3  

Hayes RA  Regondi S  Winter MJ  Butler PJ  Agradi E  Taylor EW  Kevin Chipman J 《Marine environmental research》2004,58(2-5):665-669

Metallothionein has been assayed in a range of aquatic animal tissues as an indicator of metal exposure. We sequenced chub (Leuciscus cephalus) metallothionein cDNA which showed over 90% homology to common carp, goldfish and stone loach and 77% homology to rainbow trout sequences for metallothionein. We then used the extended primer method to develop an accurate quantitative competitive RT-PCR assay for metallothionein mRNA. RT-PCR was used to measure metallothionein mRNA in feral chub from a range of field sites, with different levels of heavy metal pollution, in the West Midlands, UK. Measurements were complemented by analysis of liver and gill metallothionein protein by capillary electrophoresis. There was no significant difference in the metallothionein protein levels between fish of different rivers and there was no evidence of elevation of mRNA at the sites of highest metal exposure. The level of metal exposure (e.g. zinc, nickel and cadmium each ranging between 15 and 28 microg/l ) at the pH (7.5-8.5) of these rivers appears insufficient to elevate hepatic or gill metallothionein in chub. A lack of elevation of hepatic metallothionein mRNA in chub exposed to zinc, copper and manganese for 24 h and 10 days in the laboratory also suggests a non-responsiveness of this species.  相似文献   

A Block-Based Theoretical Model Suited to Gravitational Sliding     

Tinti  Stefano  Bortolucci  Elisabetta  Vannini  Cesare 《Natural Hazards》1997,16(1):1-28

An original theoretical model has been devised to simulate mass flow over hill slopes due to gravitational sliding. The sliding mass is discretized into a sequence of contiguous blocks which are subjected to gravitational forces, to bottom friction and to surface resistance stresses that are generally negligible for subaerial flows, but are relevant for submarine slides. The blocks interact with each other while sliding down the hill flanks because of internal forces that dissipate mechanical energy and produce a momentum exchange between the individual blocks, yet conserving the total momentum of the mass. Internal forces are expressed in terms of interaction coefficients depending on the instantaneous distance between the block centers of mass, which is a measure of the deformation experienced by the blocks: the functional dependence includes three parameters, namely the interaction intensity ¯, the deformability parameter and the shape parameter , by means of which a wide range of interaction types can be fully accounted for. The time integration is performed numerically by solving the equations for the block velocities and positions at any time ti by means of the block accelerations at the previous time t_i-1, and by subsequently updating the block accelerations, which allows to proceed iteratively to the following times. The model has been tested against laboratory results available from literature and by means of several numerical experiments involving a simplified geometry both for the sliding body and the basal surface, with the purpose of clarifying the influence of the model parameters on the slide dynamics. The model improves the performance of the existing kinematic models for slides, moreover preserving an equivalent numerical simplicity. Future applications and possible improvements of this model are suggested.  相似文献   

Atmospheric nitrogen inputs into the North Sea: effect on productivity     

Gerrit de Leeuw  Lucinda Spokes  Tim Jickells  Carsten Ambelas Skjth  Ole Hertel  Elisabetta Vignati  Susanne Tamm  Michael Schulz  Lise-Lotte Srensen  Britta Pedersen  Laura Klein  K. Heinke Schlünzen 《Continental Shelf Research》2003,23(17-19):1743

The ANICE (Atmospheric Nitrogen Inputs into the Coastal Ecosystem) project addressed the atmospheric deposition of nitrogen to the North Sea, with emphasis on coastal effects. ANICE focused on quantifying the deposition of inorganic nitrogen compounds to the North Sea and the governing processes. An overview of the results from modelling and experimental efforts is presented. They serve to identify the role of the atmosphere as a source of biologically essential chemical species to the marine biota. Data from the Weybourne Atmospheric Observatory (UK) are used to evaluate the effect of short episodes with very high atmospheric nitrogen concentrations. One such episode resulted in an average deposition of 0.8 mmol N m⁻² day⁻¹, which has the potential to promote primary productivity of 5.3 mmol C m⁻² day⁻¹. This value is compared to long-term effects determined from model results. The total calculated atmospheric deposition to the North Sea in 1999 is 948 kg N km⁻¹, i.e. 0.19 mmol N m⁻² day⁻¹ which has the potential to promote primary productivity of 1.2 mmol C m⁻² day⁻¹. Detailed results for August 1999 show strong gradients across the North Sea due to adjacent areas where emissions of NO_x and NH₃ are among the highest in Europe. The average atmospheric deposition to the southern part of the North Sea in August 1999 could potentially promote primary production of 2.0 mmol C m⁻² day⁻¹, i.e. 5.5% of the total production at this time of the year in this area of the North Sea. For the entire study area the atmospheric contribution to the primary production per m² is about two-third of this value. Most of the deposition occurs during short periods with high atmospheric concentrations. This atmospheric nitrogen is almost entirely anthropogenic in origin and thus represents a human-induced perturbation of the ecosystem.  相似文献   

Large wood transport modelling by a coupled Eulerian–Lagrangian approach     

Elisabetta Persi  Gabriella Petaccia  Stefano Sibilla 《Natural Hazards》2018,91(1):59-74

The paper discusses a model which predicts the trajectory of floating rigid bodies and may be applied to compute the motion of woody “debris” mobilized during floods. The model couples a Discrete Element (DE) Lagrangian approach for the calculation of motion of rigid bodies with the Eulerian solution of the shallow water equations (SWE), in order to simulate the transport of a cylinder in a two-dimensional stream. It differs from existing models since it is based on a dynamic approach, adapting the Basset–Boussinesq–Oseen equation. In a first step, forces are computed from flow and log velocities; then, the equations of dynamics are solved to model the planar roto-translation of the body. Model results and physical reliability are clearly affected by the values of the drag and side coefficients, especially since logs, modelled as cylinders, are able to change their orientation towards the flow. Experimental studies to evaluate drag and side coefficients can be found in the literature for a submerged cylinder, with various orientations. To extend such results to the case of a floating log, the authors performed a series of laboratory tests on partially submerged cylinders, implementing the outcomes in the proposed DE-SWE model. The coupled model is validated against existing laboratory data concerning spheres and wooden cylinder transport.  相似文献   

Installation of a vertical slurry wall around an Italian quarry lake: complications arising and simulation of the effects on groundwater flow   总被引：1，自引：0，他引：1  

D. A. De Luca  M. Lasagna  A. Morelli di Popolo e Ticineto 《Environmental Geology》2007,53(1):177-189

Slurry walls are non-structural barriers that are constructed underground to impede groundwater flow or manage groundwater control problems. The study area is in the Piemonte plain (Italy), close to the River Po. Quarrying works carried out below the piezometric surface created two big quarry lakes. The local groundwater system is characterized by a lower semi-confined aquifer, which is overlain by a semi-permeable bed of clayey peat (aquitard) and an upper unconfined aquifer. Locally, the peat fades away and the granulometry of this horizon becomes silty sandy. A planned enlargement of the quarry will increase the size and depth of the quarry lakes. So the aquitard bed between the two aquifers will be damaged, creating a mixing rate of groundwater. Such a procedure would not be compatible with the presence of two municipal wells upstream from the quarries. Consequently, the installation of a vertical diaphragm (slurry wall) is recommended to separate the aquifers and to act as a filter for the groundwater flowing from the unconfined to the semi-confined aquifer. To predict the consequences caused by the installation of the vertical diaphragm separating the unconfined aquifer and the semi-confined one, a specifically adjusted finite-difference model was used. The model showed a maximum rising of the water table equal to 12 cm, just upstream of the diaphragm and for a distance of about 100 m, and a maximum lowering of 2 cm just downstream of the diaphragm. However, the slurry wall would not cause any change in the piezometric head in the area where there are municipal wells and, hence, will not have any negative effect on the functionality of the municipal wells. Moreover, the migration of water from the unconfined aquifer through the vertical diaphragm will stimulate a series of attenuation and auto-depuration processes of eventual contaminants. These processes are due to the higher crossing time that the groundwater flow takes to go through the vertical barrier (t _a = 96.5 days, whereas for the horizontal semi-permeable layer t _a = 9.6 days). So, the vertical diaphragm can be a resolutive element, representing a mediation and separation factor between the unconfined and the semi-confined aquifers along the border of the quarrying areas, and a protective barrier for the water quality of the quarry lake and the semi-confined aquifer.  相似文献   

On a bora event simulated by the Eta Model     

S. Morelli  N. Berni 《Meteorology and Atmospheric Physics》2003,84(1-2):11-22

Summary ¶This study presents a numerical simulation of the bora wind as it occurs in form of a severe wind blowing down coastal mountains and over the Adriatic Sea. A typical cyclonic bora event, occurring during the period January 3–6, 1995, is simulated using a nested limited area model. An integration, with horizontal resolution of about 14km, and a nested one, with higher resolution, about 5.5km, are presented. The 1997 version of the Eta Model is used for both the lower resolution and the higher resolution runs. Numerous details of the simulation are found to be in good agreement with the understanding as well as the observational knowledge of the bora, thus supporting confidence in the realism of the results. In particular, features of the simulated flow are seen strongly indicative of some basic characteristics of the hydraulic model of the phenomenon, such as the mountain wave breaking and the upstream flow acceleration. Moreover, the increase in horizontal resolution, in combination with an improvement of the coastal SST information, led to a still improved realism of the low-level wind representation over the Adriatic Sea.Received December 31, 2001; revised March 25, 2002; accepted July 19, 2002 Published online: February 20, 2003  相似文献   

Clinopyroxenes from mantle-related xenocrysts in alkaline basalts from Hannuoba (China): augite–pigeonite exsolutions and their thermal significance     

Elisabetta?Brizi  Sabrina?NazzareniEmail author  Francesco?Princivalle  Pier?Francesco?Zanazzi 《Contributions to Mineralogy and Petrology》2003,145(5):578-584

Optically homogeneous augite xenocrysts, closely associated with spinel–peridotite nodules, occur in alkali basalts from Hannuoba (Hebei province, China). They were studied by electron and X-ray diffraction to define the occurrence and significance of pigeonite exsolution microtextures. Sub-calcic augite (Wo₃₄) exsolved into En_62–62Fs_25–21Wo_13–17 pigeonite and En_46–45Fs_14–14Wo_40–42 augite, as revealed by TEM through diffuse coarser (001) lamellae (100–300 Å) and only incipient (100) thinner ones (<70 Å). C2/c augite and P2₁/c pigeonite lattices, measured by CCD-XRD, relate through a(Aug)?a(Pgt), b(Aug)?b(Pgt), c(Aug)≠c(Pgt) [5.278(1) vs 5.189(1)Å] and β(Aug)≠β(Pgt) [106.55(1) vs 108.55(2)°]. Cell and site volumes strongly support the hypothesis that the augite xenocrysts crystallised at mantle depth from alkaline melts. After the augite xenocrysts entered the magma, (001) lamellae first formed by spinodal decomposition at a T_min of about 1,100 °C, and coarsened during very rapid transport to the surface; in a later phase, possibly on cooling, incipient (100) lamellae then formed.  相似文献   

A structural and geophysical approach to the study of fractured aquifers in the Scansano-Magliano in Toscana Ridge, southern Tuscany, Italy   总被引：1，自引：0，他引：1  

Roberto Francese  Francesco Mazzarini  Andrea Bistacchi  Gianfranco Morelli  Giorgio Pasquarè  Nicola Praticelli  Henry Robain  Nigel Wardell  Annalisa Zaja 《Hydrogeology Journal》2009,17(5):1233-1246

Fresh water availability has recently become a serious concern in the Italian Apennines, as various activities rely on a predictable supply. Along the ridge between Scansano and Magliano in Toscana, in southern Tuscany, the situation is further complicated by contamination of the nearby alluvial aquifers. Aquifers locally consist of thin fractured reservoirs, generally within low-permeability formations, and it can be difficult to plan the exploitation of resources based on conventional techniques. An integrated study based on geological data investigated the link between tectonics and groundwater circulation, to better define the hydrological model. After the regional identification of fault and fracture patterns, a major structure was investigated in detail to accurately map its spatial position and to understand the geometry and properties of the associated aquifer and assess its exploitation potential. The subsurface around the fault zone was clearly imaged using ground probing radar, two-dimensional and three-dimensional resistivity tomography, and three-dimensional shallow seismic surveys. The vertical and horizontal contacts between the different geological units of the Ligurian and Tuscan series were resolved with a high degree of spatial accuracy. Three-dimensional high-resolution geophysical imaging proved to be a very effective means of characterising small-scale fractured reservoirs.  相似文献