Modelling and experimental study of coupled exchange of p,p′‐DDE and colloids in a flume simulated stream–streambed system          下载免费PDF全文

Celina Camarena  Doris Otero  Jianhong Ren 《水文研究》2016,30(1):40-56

Stream–subsurface exchange plays a significant role in the fate and transport of contaminants in streams. It has been modelled explicitly by considering fundamental processes such as hydraulic exchange, colloid filtration, and contaminant interactions with streambed sediments and colloids. The models have been successfully applied to simulate the transport of inorganic metals and nutrients. In this study, laboratory experiments were conducted in a recirculating flume to investigate the exchange of a hydrophobic organic contaminant, p,p′‐dichloro‐diphenyl‐dichloroethane (DDE), between a stream and a quartz sand bed. A previously developed process‐based multiphase exchange model was modified by accounting for the p,p′‐DDE kinetic adsorption to and desorption from the bed sediments/colloids and was applied to interpret the experimental results. Model input parameters were obtained by conducting independent small‐scale batch experiments. Results indicate that the immobilization of p,p′‐DDE in the quartz sand bed can occur under representative natural stream conditions. The observed p,p′‐DDE exchange was successfully simulated by the process‐based model. The model sensitivity analysis results show that the exchange of p,p′‐DDE can be sensitive to either the sediment sorption/desorption parameters or colloidal parameters depending on the experimental conditions tested. For the experimental conditions employed here, the effect of colloids on contaminant transport is expected to be minimal, and the stream–subsurface exchange of p,p′‐DDE is dominated by the interaction of p,p′‐DDE with bed sediment. The work presented here contributes to a better mechanistic understanding of the complex transport process that hydrophobic organic contaminants undergo in natural streams and to the development of reliable, predictive models for the assessment of impacted streams. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

On the estimation of mooring line characteristic resistance for reliability analysis     

Roberto Montes-Iturrizaga  Ernesto Heredia-Zavoni  Francisco Silva-Gonzlez 《Applied Ocean Research》2007,29(4):239-241

The main aim of this work is to derive a correct formulation for the characteristic resistance of a mooring line segment with lognormally distributed component resistances and substitute an equation proposed by Vazquez-Hernandez et al. [Vazquez-Hernandez AO, Ellwanger GB, Sagrilo LVS. Reliability-based comparative study for mooring lines design criteria. Appl Ocean Res 2006; 28(6):398–406] in a paper published in this journal, which is not correct. The mooring line is considered as a series system and the resistances of individual components of a line segment are statistically independent and identically distributed; furthermore, the case of normally distributed component resistances is also discussed. A comparison with the corresponding equation proposed by DNV-OS-E301 is given. Results show that the formula proposed by Vazquez-Hernandez et al. [Vazquez-Hernandez AO, Ellwanger GB, Sagrilo LVS. Reliability-based comparative study for mooring lines design criteria. Appl Ocean Res 2006; 28(6):398–406] overestimates quite significantly the characteristic resistance of a mooring line segment.  相似文献   

Submarine-fan facies associations of the Upper Cretaceous and Paleocene Gottero Sandstone,Ligurian Apennines,Italy     

Tor H. Nilsen  Ernesto Abbate 《Geo-Marine Letters》1983,3(2-4):193-197

The Upper Cretaceous and Paleocene Gottero Sandstone was deposited as a small deep-sea fan on ophiolitic crust in a trench-slope basin. It was thrust northeastward as an allochthonous sheet in Early and Middle Cenozoic time. The Gottero, as thick as 1500 m, was probably derived from erosion of Hercynian granites and associated metamorphic rocks in northern Corsica. Outcrops of inner-fan channel, middle-fan channel and interchannel, outer-fan lobe, fan-fringe, and basin-plain facies associations indicate that the depositional model of Mutti and Ricci Lucchi for mixed-sediment deep-sea fans can be used. The original fan had a radius of 30 to 50 km.  相似文献   

Irregular Satellites of Jupiter: a study of the capture direction     

Douglas Soldan de Oliveira  Othon Cabo Winter  Ernesto Vieira Neto  Gislaine de Felipe 《Earth, Moon, and Planets》2007,100(3-4):233-239

The irregular satellites of Jupiter are believed to be captured asteroids or planetesimals. In the present work is studied the direction of capture of these objects as a function of their orbital inclination. We performed numerical simulations of the restricted three-body problem, Sun-Jupiter-particle, taking into account the growth of Jupiter. The integration was made backward in time. Initially, the particles have orbits as satellites of Jupiter, which has its present mass. Then, the system evolved with Jupiter losing mass and the satellites escaping from the planet. The reverse of the escape direction corresponds to the capture direction. The results show that the Lagrangian points L1 and L2 mainly guide the direction of capture. Prograde satellites are captured through these two gates with very narrow amplitude angles. In the case of retrograde satellites, these two gates are wider. The capture region increases as the orbital inclination increases. In the case of planar retrograde satellites the directions of capture cover the whole 360° around Jupiter. We also verified that prograde satellites are captured earlier in actual time than retrograde ones. This paper was presented at the Asteriods, Comets and Meteors meeting held at Búzios, Rio de Janeiro, Brazil in August 2005 and could not be included in the special issue related to that conference.  相似文献   

Low dispersive modeling of Rayleigh waves on partly staggered grids     

O. Rojas  B. Otero  J. E. Castillo  S. M. Day 《Computational Geosciences》2014,18(1):29-43

In elastic media, finite-difference (FD) implementations of free-surface (FS) boundary conditions on partly staggered grid (PSG) use the highly dispersive vacuum formulation (VPSG). The FS boundary is embedded into a “vacuum” grid layer (null Lame’s constants and negligible density values) where the discretized equations of motion allow computing surface displacements. We place a new set of compound (stress-displacement) nodes along a planar FS and use unilateral mimetic FD discretization of the zero-traction conditions for displacement computation (MPSG). At interior nodes, MPSG reduces to standard VPSG methods and applies fourth-order centered FD along cell diagonals for staggered differentiation combined with nodal second-order FD in time. We perform a dispersion analysis of these methods on a Lamb’s problem and estimate dispersion curves from the phase difference of windowed numerical Rayleigh pulses at two FS receivers. For a given grid sampling criterion (e.g., six or ten nodes per reference S wavelength λ ^S), MPSG dispersion errors are only a quarter of the VPSG method. We also quantify root-mean-square (RMS) misfits of numerical time series relative to analytical waveforms. MPSG RMS misfits barely exceed 10 % when nine nodes sample the minimum S wavelength $\lambda _{\text {MIN}}^{\mathrm {S}}$ in transit (along distances $\sim $ 145 $\lambda _{\text {MIN}}^{\mathrm {S}}$ ). In same tests, VPSG RMS misfits exceed 70 %. We additionally compare MPSG to a consistently fourth-order mimetic method designed on a standard staggered grid. The latter equates the former’s dispersion errors on grids twice denser and shows higher RMS precision only on grids with six or less nodes per $\lambda _{\text {MIN}}^{\mathrm {S}}$ .  相似文献   

A software solution for point counting. Petrographic thin section analysis as a case study     

Martín L. Larrea  Silvia M. Castro  Ernesto A. Bjerg 《Arabian Journal of Geosciences》2014,7(8):2981-2989

In the field of geology, as in many other fields, a common problem is the analysis of 2D sections. An example of this is the petrographic study of rock samples, i.e., the quantification of its mineral components and the percentages of each phase present in it. Conventionally, this quantification has been determined by point counting performed on thin sections. Although point counting is very time consuming, it is of common use in several domains including geology, biology, medicine, and materials sciences, among others. Point counting in thin sections is normally conducted through mechanical or electromechanical devices attached to a microscope; such devices are very expensive, offer limited functionality, and are very time consuming. In this contribution, we introduce an interactive visualization application called Rock.AR that reduces the amount of time required to apply this technique and simplify its work flow. It provides visual tools like distortion techniques, overview + detail, and statistics to assist the technique. A comparison between this application and similar tools through users' experiences is provided. We compare the time it takes to complete a session of point counting and the tools' usability.  相似文献   

Controls of δS and δO in dissolved sulphate: Learning from a detailed survey in the Llobregat River (Spain)     

Neus Otero  Albert Soler  Àngels Canals 《Applied Geochemistry》2008

The S and O isotopic composition of dissolved SO₄, used as a tracer for SO₄ sources, was applied to the water of the Llobregat River system (NE Spain). The survey was carried out at 30 sites where surface water was sampled on a monthly basis over a period of 2a. The concentration of dissolved SO₄ varied from 20 to 1575 mg L⁻¹. Sulphur isotopic compositions clustered in two populations: one – 93% of the samples – had positive values with a mode of +9‰; the other had negative values and a mode of −5‰. Data for δ¹⁸O_SO4 showed a mean value of +11‰, with no bi-modal distribution, though lower values of δ¹⁸O corresponded to samples with negative δ³⁴S. These values can not be explained solely by the contribution of bedrock SO₄ sources: that is, sulphide oxidation and the weathering of outcrops of sulphates, though numerous chemical sediments exist in the basin. Even in a river with a high concentration of natural sources of dissolved SO₄, such as the Llobregat River, the δ³⁴S values suggest that dissolved SO₄ is controlled by a complex mix of both natural and anthropogenic sources. The main anthropogenic sources in this basin are fertilizers, sewage, potash mine effluent and power plant emissions. Detailed river water sampling, together with the chemical and isotopic characterisation of the main anthropogenic inputs, allowed determination of the influence of redox processes, as well as identification of the contribution of natural and anthropogenic SO₄ sources and detection of spatial variations and seasonal changes among these sources. For instance, in the Llobregat River the input of fertilisers is well marked seasonally. Minimum values of δ³⁴S are reported during fertilization periods – from January to March – indicating a higher contribution of this source. The dual isotope approach, δ³⁴S and δ¹⁸O, is useful to better constrain the sources of SO₄. Moreover, in small-scale studies, where the inputs are well known and limited, the mixing models can be enhanced and the contribution of the different sources can be quantified to some extent.  相似文献   

Mouvements voisins de collision quadruple dans le probleme trapezoidal des 4 corps     

Lacomba  Ernesto A. 《Celestial Mechanics and Dynamical Astronomy》1983,31(1):23-41

Celestial Mechanics and Dynamical Astronomy - On reprend ici l'étude du problème trapezoïdal des 4 corps, qui a été commencée par l'auteur dans [2]. En...  相似文献   

A compact model for the planar rhomboidal 4-body problem     

Ernesto A. Lacomba  Ernesto Pérez-Chavela 《Celestial Mechanics and Dynamical Astronomy》1992,54(4):343-355

We obtain a compact model for the global study of the planar rhomboidal 4-body problem in a level of constant negative energy. This model is a variation of the non compact model obtained through a McGehee blow up transformation. but compactness permits to obtain results which are not clear in the other case.  相似文献   

Ostreopsis cf. ovata bloom in the northern Adriatic Sea during summer 2009: ecology, molecular characterization and toxin profile     

Accoroni S  Romagnoli T  Colombo F  Pennesi C  Di Camillo CG  Marini M  Battocchi C  Ciminiello P  Dell'Aversano C  Dello Iacovo E  Fattorusso E  Tartaglione L  Penna A  Totti C 《Marine pollution bulletin》2011,62(11):2512-2519

Intense blooms of the benthic dinoflagellate Ostreopsis cf. ovata have occurred in the northern Adriatic Sea since 2006. These blooms are associated with noxious effects on human health and with the mortality of benthic organisms because of the production of palytoxin-like compounds. The O. cf. ovata bloom and its relationships with nutrient concentrations at two stations on the Conero Riviera (northern Adriatic Sea) were investigated in the summer of 2009. O. cf. ovata developed from August to November, with the highest abundances in September (1.3 × 10⁶ cells g⁻¹ fw corresponding to 63.8 × 10³ cells cm⁻²). The presence of the single O. cf. ovata genotype was confirmed by a PCR assay. Bloom developed when the seawater temperature was decreasing. Nutrient concentrations did not seem to affect bloom dynamics. Toxin analysis performed by high resolution liquid chromatography-mass spectrometry revealed a high total toxin content (up to 75 pg cell⁻¹), including putative palytoxin and all the ovatoxins known so far.  相似文献