Removal of water‐surface reflection effects with a temporal minimum filter for UAV‐based shallow‐water photogrammetry          下载免费PDF全文

I GD Yudha Partama  Ariyo Kanno  Motoyasu Ueda  Yoshihisa Akamatsu  Ryutei Inui  Masahiko Sekine  Koichi Yamamoto  Tsuyoshi Imai  Takaya Higuchi 《地球表面变化过程与地形》2018,43(12):2673-2682

The recent development of structure‐from‐motion (SfM) and multi‐view stereo (MVS) photogrammetry techniques has enabled semi‐automatic high‐resolution bathymetry using aerial images taken by consumer‐grade digital cameras mounted on unmanned aerial vehicles (UAVs). However, the applicability of these techniques is sometimes limited by sun and sky reflections at the water surface, which render the point‐cloud density and accuracy insufficient. In this research, we present a new imaging technique to suppress the effect of these water‐surface reflections. In this technique, we order a drone to take a short video instead of a still picture at each waypoint. We then apply a temporal minimum filter to the video. This filter extracts the smallest RGB values in all the video frames for each pixel, and composes an image with greatly reduced reflection effects. To assess the performance of this technique, we applied it at three small shallow‐water sites. Specifically, we evaluated the effect of the technique on the point cloud density and the accuracy and precision of the photogrammetry. The results showed that the proposed technique achieved a far denser point cloud than the case in which a randomly chosen frame was used for each waypoint, and also showed better overall accuracy and precision in estimating water‐bottom elevation. The effectiveness of this new technique should depend on the surface wave state and sky radiance distribution, and this dependence, as well as the applicability to large areas, should be investigated in future research. Copyright © 2018 John Wiley & Sons, Ltd.  相似文献   

Collapse behavior of a brick masonry house using a shaking table and numerical simulation based on the extended distinct element method   总被引：1，自引：1，他引：0  

T. Nakagawa  T. Narafu  H. Imai  T. Hanazato  Q. Ali  C. Minowa 《Bulletin of Earthquake Engineering》2012,10(1):269-283

Damage caused by devastating earthquakes has occurred in many developing countries. In order to mitigate such damage by promoting the study of adequate seismic design strategies, the authors conducted a dynamic collapse test on 3 m × 3 m × 3 m brick masonry house constructed with Pakistani bricks, using a one-direction horizontal large-scale shaking table. In order to analyze and simulate seismic performance of the masonry structures, the authors applied a new numerical simulating method based on the Extended Distinct Element Method (EDEM) and conducted collapse simulations of the brick masonry house behavior during the shaking table tests. In the numerical simulation model, bricks were assumed to be rigid bodies, and mortar was modeled using a mortar spring that consists of a normal spring and a shear spring. The parameters of each mortar spring were defined based on the results of material tests. Simulated results showed various collapsing processes, and the simulated aspects were found to be similar to the results of the shaking table tests.  相似文献   

Molecular ecological study of <Emphasis Type="Italic">Siganus spinus</Emphasis> and <Emphasis Type="Italic">S. guttatus</Emphasis> from Okinawan waters based on mitochondrial DNA control region sequences     

Kensuke Iwamoto  Akihiro Takemura  Tetsuo Yoshino  Hideyuki Imai 《Journal of Oceanography》2009,65(1):103-112

The mitochondrial DNA (mtDNA) control region was sequenced to examine the genetic variability and gene flow of juvenile Siganus spinus and S. guttatus. In total, 461 nucleotide sequences were obtained from 69 specimens of juvenile S. spinus from Okinawa Island and Ishigaki Island, in which 17 variable sites and 22 haplotypes were identified. Haplotype diversity (h) was high (0.9244 in Okinawa and 0.8984 in Ishigaki), whereas nucleotide diversity (π) was low (0.0063 in Okinawa and 0.0059 in Ishigaki). The two populations were not genetically distinct. Siganus guttatus, which do not form large schools at recruitment, in contrast S. spinus, were also analyzed by studying 152 individuals collected off Okinawa Island, Miyako Island, and Ishigaki Island. Of 476 nucleotide sequences, 50 were variable, and 42 haplotypes were identified. Genetic variability values were high (h = 0.8766 and π = 0.0151 in Okinawa; h = 0.9640 and π = 0.0192 in Miyako; h = 0.9161 and π = 0.0199 in Ishigaki). The Okinawa population was genetically isolated from the Miyako and Ishigaki populations. As a result, genetic diversity was high for each of these siganid populations despite their being target species for fisheries; however, the degree of inter-population gene flow was higher for S. spinus than S. guttatus, suggesting that these species exhibit different dispersal strategies.  相似文献   

Can N-body systems generate periodic gravitational waves?     

T. Chiba  T. Imai  H. Asada 《Monthly notices of the Royal Astronomical Society》2007,377(1):269-272

  相似文献   

Preparation of Two New GSJ Geochemical Reference Materials: Basalt JB-1b and Coal Fly Ash JCFA-1   总被引：1，自引：0，他引：1  

Shigeru Terashima  Masahiro Taniguchi  Masumi Mikoshiba  Noboru Imai 《Geostandards and Geoanalytical Research》1998,22(1):113-117

  相似文献   

Primary Ore Mineral Assemblage and Fluid Inclusion Study of the Batu Hijau Porphyry Cu-Au Deposit, Sumbawa, Indonesia   总被引：3，自引：0，他引：3  

Akira Imai  Satoshi Ohno 《Resource Geology》2005,55(3):239-248

Abstract. The Batu Hijau porphyry Cu‐Au deposit, Sumbawa Island, Indonesia, is associated with a tonalitic intrusive complex. The temperature‐pressure condition of mineralization at the Batu Hijau deposit is discussed on the basis of fluid inclusion microthermometry. Then, the initial Cu‐Fe sulfide mineral assemblage is discussed. Bornite and chalcopyrite are major copper ore minerals associated with quartz veinlets. The quartz veinlets have been classified into ‘A’ veinlets associated with bornite, digenite, chalcocite and chalcopyrite, ‘B’ veinlets having chalcopyrite bornite along vuggy center‐line, rare ‘C’ chalcopyrite‐quartz veinlets, and late ‘D’ veinlets consisting of massive pyrite and quartz (Clode et al., 1999). Copper and gold mineralization is associated with abundant ‘A’ quartz veinlets. Abundant fluid inclusions are found in veinlet quartz consisting mainly of gas‐rich inclusions and polyphase inclusions throughout the veinlet types. The hydrothermal activity occurred in temperature‐pressure conditions of aqueous fluid immiscibility into hypersaline brine and dilute vapor. The halite dissolution (Tm[halite]) and liquid‐vapor homogenization (Th) temperatures of the polyphase inclusions in veinlet quartz range from 270 to 472d?C and from 280 to 454d?C, respectively. The estimated salinity ranges from 36 to 47 wt% (NaCl equiv.). The apparent pressures lower than 300 bars are estimated to have been along the liquid‐vapor‐halite curve for the fluid inclusions having the Th lower than the Tm that trapped the brine saturated with halite, or at slightly higher pressure relative to liquid‐vapor‐halite curve for the fluid inclusions having the Th higher than the Tm that trapped the brine unsaturated with halite. The actual temperature and pressure during the hydrothermal activity at the Batu Hijau deposit are estimated to have been around 300d?C and 50 bars. At such temperature‐pressure conditions, the principal and initial Cu‐Fe sulfide mineral assemblages are thought to be chalcopyrite + bornite solid solution (bnss) for the chalcopyrite‐bearing assemblage, and chalcocite‐digenite solid solution and bnss for the chalcopyrite‐free assemblage.  相似文献   

Evolution of Hydrothermal System at the Dizon Porphyry Cu-Au Deposit, Zambales, Philippines     

Akira Imai 《Resource Geology》2005,55(2):73-90

Abstract. Evolution of hydrothermal system from initial porphyry Cu mineralization to overlapping epithermal system at the Dizon porphyry Cu‐Au deposit in western central Luzon, Zambales, Philippines, is documented in terms of mineral paragen‐esis, fluid inclusion petrography and microthermometry, and sulfur isotope systematics. The paragenetic stages throughout the deposit are summarized as follows; 1) stockwork amethystic quartz veinlets associated with chalcopyrite, bornite, magnetite and Au enveloped by chlorite alteration overprinting biotite alteration, 2) stockwork quartz veinlets with chalcopyrite and pyrite associated with Au and chalcopyrite and pyrite stringers in sericite alteration, 3) stringer quartz veinlets associated with molybdenite in sericite alteration, and 4) WNW‐trending quartz veins associated with sphalerite and galena at deeper part, while enargite and stibnite at shallower levels associated with advanced argillic alteration. Chalcopyrite and bornite associated with magnetite in quartz veinlet stockwork (stage 1) have precipitated initially as intermediate solid solution (iss) and bornite solid solution (bnss), respectively. Fluid inclusions in the stockwork veinlet quartz consist of gas‐rich inclusions and polyphase inclusions. Halite in polyphase inclusions dissolves at temperatures ranging from 360d?C to >500d?C but liquid (brine) and gas (vapor) do not homogenize at <500d?C. The maximum pressure and minimum temperature during the deposition of iss and bnss with stockwork quartz veinlets are estimated to be 460 bars and 500d?C. Fluid inclusions in veinlet stockwork quartz enveloped in sericite alteration (stage 2) consist mainly of gas‐rich inclusions and polyphase inclusions. In addition to the possible presence of saturated NaCl crystals at the time of entrapment of fluid inclusions that exhibit the liquid‐vapor homogenization temperatures lower than the halite dissolution temperatures in some samples, wide range of temperatures of halite dissolution and liquid‐vapor homogenization of polyphase inclusions from 230d?C to >500d?C and from 270d?C to >500d?C, respectively, suggests heterogeneous entrapment of gaseous vapor and hypersaline brine. The minimum pressure and temperature are estimated to be about 25 bars and 245d?C. Fluid inclusions in veinlet quartz associated with molybdenite (stage 3) are dominated by gas‐rich inclusions accompanied with minor liquid‐rich inclusions that homogenize at temperatures between 350d?C and 490d?C. Fluid inclusions in vuggy veinlet quartz associated with stibnite (stage 4) consist mainly of gas‐rich inclusions with subordinate polyphase inclusions that do not homogenize below 500d?C. Fluid inclusions in veinlet quartz associated with galena and sphalerite (stage 4) are composed of liquid‐rich two‐phase inclusions, and they homogenize into liquid phase at temperatures ranging widely from 190d?C to 300d?C (suggesting boiling) and the salinity ranges from 1.0 wt% to 3.4 wt% NaCl equivalent. A pressure of about 15 bars is estimated for the dilute aqueous solution of 190d?C from which veinlet quartz associated with galena and sphalerite precipitated. In addition to a change in temperature‐pressure regime from lithostatic pressure during the deposition of iss and bnss with stockwork quartz veinlets to hydrostatic pressure during fracture‐controlled quartz veinlet associated with galena and sphalerite, a decrease in pressure is supposed to have occurred due to unroofing or removal of the overlying piles during the temperature decrease in the evolution of hydrothermal system. The majority of the sulfur isotopic composition of sulfides ranges from ±0 % to +5 %. Sulfur originated from an iso‐topically uniform and homogeneous source, and the mineralization occurred in a single hydrothermal system.  相似文献   

Preparation of a New Geological Survey of Japan Geochemical Reference Material: Coral JCp-1   总被引：2，自引：0，他引：2  

Takashi Okai  Atsushi Suzuki  Hodaka Kawahata  Shigeru Terashima  Noboru Imai 《Geostandards and Geoanalytical Research》2002,26(1):95-99

A new geochemical reference material, coral Porites sp. JCp-1 has been prepared by the Geological Survey of Japan (GSJ). Provisional values for twenty one major, minor and trace elements are presented. The homogeneity tests showed that all elements studied are considered to be homogeneously distributed.  相似文献   

About the Special Issue: Collection of Achievements on Earth Resources from AUN/SEED-Net, Part II     

Akira Imai    Carla B. Dimalanta  Agung Harijoko 《Resource Geology》2007,57(2):99-101

  相似文献   

Occurrence of Halogen-rich Phlogopite in Late Cenozoic Volcanic Rocks in the Japanese Arcs     

Akira Imai 《Resource Geology》2004,54(2):153-166

Abstract. Halogen-rich phlogopite occurs in the groundmass of andesite and dacite lavas from Late Tertiary to Quaternary volcanoes associated with native sulfur and limonite deposits (Shiretoko-Iwozan, Hachimantai, Adatara, Omeshidake, Masaki) and hydrothermal ore deposits (Harukayama, Muineyama, Hishikari) in Japan. The F contents of the halogen-rich phlogopite range from 3.6 to 5.7 wt%, corresponding to atomic F/(F+C1+OH) ratios ranging from 0.45 to 0.69. On the other hand, the Cl contents of the halogen-rich phlogopite are around 0.2 wt%. The atomic Mg/(Mg+Fe) ratios range from 0.69 to 0.83.
The fluorine intercept value [IV(F)] defined by Munoz (1984) of the phlogopites ranges from 0.79 to 3.17, and the chlorine intercept value [IV(Cl)] ranges from -7.11 to -7.77. The observed IV(F) of the phlogopites broadly overlap the range of the IV(F) for biotites from porphyry copper deposits. On the other hand, the observed IV(Cl) are significantly lower than the IV(Cl) for biotites from porphyry copper deposits. Whereas the F contents of the phlogopite appear more prominent compared to the Cl contents, the calculation of halogen intercept values revealed that the phlogopites are enriched in Cl with respect to the element distribution effect of Mg-Fe substitution. Since the degree of Cl enrichment of the phlogopite is more significant compared to that of biotite in porphyry copper deposits, the phlogopites are considered to have formed under the condition of significantly high activity of halogens. Hydrothermal ore deposits may be formed in magmatic hydrothermal system associated with volcanoes where halogen-rich phlogopite is formed by hypersaline fluid.  相似文献