Fluvial dynamics and 14C-10Be disequilibrium on the Bolivian Altiplano     

Kristina Hippe  Tiemen Gordijn  Vincenzo Picotti  Irka Hajdas  John D. Jansen  Marcus Christl  Christof Vockenhuber  Colin Maden  Naki Akçar  Susan Ivy-Ochs 《地球表面变化过程与地形》2019,44(3):766-780

Determining sediment transfer times is key to understanding source-to-sink dynamics and the transmission of environmental signals through the fluvial system. Previous work on the Bolivian Altiplano applied the in situ cosmogenic ¹⁴C-¹⁰Be-chronometer to river sands and proposed sediment storage times of ~10–20 kyr in four catchments southeast of Lake Titicaca. However, the fidelity of those results hinges upon isotopic steady-state within sediment supplied from the source area. With the aim of independently quantifying sediment storage times and testing the ¹⁴C-¹⁰Be steady-state assumption, we dated sediment storage units within one of the previously investigated catchments using radiocarbon dating, cosmogenic ¹⁰Be-²⁶Al isochron burial dating, and ¹⁰Be-²⁶Al depth-profile dating. Palaeosurfaces appear to preserve remnants of a former fluvial system, which has undergone drainage reversal, reduction in catchment area, and local isostatic uplift since ~2.8 Ma. From alluvium mantling the palaeosurfaces we gained a deposition age of ~580 ka, while lower down fluvial terraces yielded ≤34 ka, and floodplains ~3–1 ka. Owing to restricted channel connectivity with the terraces and palaeosurfaces, the main source of channel sediment is via reworking of the late Holocene floodplain. Yet modelling a set of feasible scenarios reveals that floodplain storage and burial depth are incompatible with the ¹⁴C-¹⁰Be disequilibrium measured in the channel. Instead we propose that the ¹⁴C-¹⁰Be offset results from: (i) non-uniform erosion whereby deep gullies supply hillslope-derived debris; and/or (ii) holocene landscape transience associated with climate or human impact. The reliability of the ¹⁴C-¹⁰Be chronometer vitally depends upon careful evaluation of sources of isotopic disequilibrium in a wide range of depositional and erosional landforms in the landscape. © 2018 John Wiley & Sons, Ltd.  相似文献   

Analysis of one-dimensional models for exchange flows under strong stratification     

Kaptein  Steven J.  van de Wal  Koen J.  Kamp  Leon P. J.  Armenio  Vincenzo  Clercx  Herman J. H.  Duran-Matute  Matias 《Ocean Dynamics》2020,70(1):41-56

Ocean Dynamics - One-dimensional models of exchange flows driven by horizontal density gradients are well known for performing poorly in situations with weak turbulent mixing. The main issue with...  相似文献   

Estimating soil loss of given return period by USLE-M-type models     

Vincenzo Pampalone  Vito Ferro 《水文研究》2020,34(11):2324-2336

  相似文献   

Indentation of a Sensitive Clay by a Flat-Ended Axisymmetrical Punch     

Mireille Sandrine Ewane  Vincenzo Silvestri  Michael James 《Geotechnical and Geological Engineering》2018,36(6):3601-3625

  相似文献   

Deformation patterns of upper Quaternary strata and their relation to active tectonics,Po Basin,Italy     

Alessandro Amorosi  Luigi Bruno  Bruno Campo  Bianca Costagli  Wan Hong  Vincenzo Picotti  Stefano Claudio Vaiani 《Sedimentology》2021,68(1):402-424

Despite increased application of subsurface datasets below the limits of seismic resolution, reconstructing near‐surface deformation of shallow key stratigraphic markers beneath modern alluvial and coastal plains through sediment core analysis has received little attention. Highly resolved stratigraphy of Upper Pleistocene to Holocene (Marine Isotope Stage 5e to Marine Isotope Stage 1) alluvial, deltaic and coastal depositional systems across the southern Po Plain, down to 150 m depth, provides an unambiguous documentation on the deformation of previously flat‐lying strata that goes back in time beyond the limits of morphological, historical and palaeoseismic records. Five prominent key horizons, accurately selected on the basis of their sedimentological characteristics and typified for their fossil content, were used as highly effective stratigraphic markers (M1 to M5) that can be tracked for tens of kilometres across the basin. A facies‐controlled approach tied to a robust chronology (102 radiocarbon dates) reveals considerable deformation of laterally extensive nearshore (M1), continental (M2 and M3) and lagoon (M4 and M5) marker beds originally deposited in a horizontal position (M1, M4 and M5). The areas where antiformal geometries are best observed are remarkably coincident with the axes of buried ramp anticlines, across which new seismic images reveal substantially warped stratal geometries of Lower Pleistocene strata. The striking spatial coincidence of fold crests with the epicentres of historic and instrumental seismicity suggests that deformation of marker beds M1 to M5 might reflect, in part at least, syntectonically generated relief and, thus, active tectonism. Precise identification and lateral tracing of chronologically constrained stratigraphic markers in the ¹⁴C time window through combined sedimentological and palaeoecological data may delineate late Quaternary subsurface stratigraphic architecture at an unprecedented level of detail, outlining cryptic stratal geometries at the sub‐seismic scale. This approach is highly reproducible in tectonically active Quaternary depositional systems and can help to assess patterns of active deformation in the subsurface of modern alluvial and coastal plains worldwide.  相似文献   

Rill flow resistance law under equilibrium bed‐load transport conditions     

Costanza Di Stefano  Alessio Nicosia  Vincenzo Pampalone  Vincenzo Palmeri  Vito Ferro 《水文研究》2019,33(9):1317-1323

In this paper, a recently deduced flow resistance equation for open channel flow was tested under equilibrium bed‐load transport conditions in a rill. First, the flow resistance equation was deduced applying dimensional analysis and the incomplete self‐similarity condition for the flow velocity distribution. Then, the following steps were carried out for developing the analysis: (a) a relationship (Equation  13 ) between the Γ function of the velocity profile, the rill slope, and the Froude number was calibrated by the available measurements by Jiang et al.; (b) a relationship (Equation  17 ) between the Γ function, the rill slope, the Shields number, and the Froude number was calibrated by the same measurements; and (c) the Darcy–Weisbach friction factor values measured by Jiang et al. were compared with those calculated by the rill flow resistance equation with Γ estimated by Equations  13 and 17 . This last comparison demonstrated that the rill flow resistance equation, in which slope and Shields number, representative of sediment transport effects, are introduced, is characterized by the lowest values of the estimate errors.  相似文献   

Jurassic stratigraphy of the Belluno Basin and Friuli Platform: a perspective on far-field compression in the Adria passive margin     

Vincenzo Picotti  Miriam Cobianchi 《Swiss Journal of Geoscience》2017,110(3):833-850

Anomalous patterns of the sedimentary architecture have been recognized in passive margins, and only recently they have been associated with plate reorganization or compressional deformations propagating from distant margins. With the aim of discussing the sedimentary architecture and the potential tectonic perturbations to the passive margin pattern, we present the revision of the stratigraphy of a fossil passive margin, involved in the retrobelt of the Alpine orogeny. The main events at the transition from rifted to passive margin have been controlled by palaeoceanography, i.e. the trophic state of surface waters that hampered the carbonate photozoan productivity for a long period between Toarcian and Callovian. Toward the latest Bajocian–earliest Bathonian, the platform productivity increased, dominated by ooids. A regressional trend up to the Middle Bathonian allowed the rapid infilling of the previous rift basin. The successive aggradation in the platform was still dominated by non-skeletal grains until the Early Oxfordian. The Middle Oxfordian to Early Kimmeridgian was a time of recovery of the palaeoceanographic conditions allowing the establishment of a hydrozoan/coral rich platform. The sedimentation rates in the platform increased at the margin of the productive Friuli–Adriatic Platform. From Late Kimmeridgian on, the sedimentation rates at the platform margin returned to the pre-Oxfordian values. At the scale of the whole Adriatic Platform, the Middle Oxfordian to Early Kimmeridgian interval is variable in thickness from 0 to 800 m, and it depicts a couple of folds of around 80–100 km of wavelength. The subsidence analysis of wells and composite logs from literature suggests this interval as a perturbation to the passive margin trend of around 3 Myr of duration. We interpret this folding event, superimposed to the passive margin subsidence, as the far field expression of the transition from intraoceanic to continental obduction, occurred at the eastern Adria active margin.  相似文献   

Carbonate slope re-sedimentation in a tectonically-active setting (Western Sicily Cretaceous Escarpment,Italy)     

Vincenzo Randazzo  Johan Le Goff  Pietro Di Stefano  John Reijmer  Simona Todaro  Maria Simona Cacciatore 《Sedimentology》2020,67(5):2360-2391

Tectonic processes are widely considered as a mechanism causing carbonate platform margin instabilities leading to the emplacement of mass transport deposits and calciturbidites. However, only few examples establishing a clear link between tectonics and re-sedimentation processes are known from the literature. The two-dimensional and three-dimensional wire-cut walls of hundreds of quarries extracting ornamental limestones (for example, Perlato di Sicilia) from the Western Sicily Cretaceous Escarpment in Italy expose a series of mass transport deposits. The depositional architecture, spatial facies distribution and sedimentary features of these deposits were studied in detail. Thin section analysis was used to define the microfacies characteristics and to determine the age of the re-sedimented limestones. Eleven facies types grouped into four facies associations were recognized that defined specific depositional processes and environments. The stratigraphic architecture of the slope was reconstructed using four composite facies successions based on the detailed analysis and correlation of the field sections. The palaeoslope orientation was reconstructed based on the analysis of synsedimentary faults, slump scars and pinch-out geometries. The Western Sicily Cretaceous Escarpment was strongly influenced by synsedimentary transtensional tectonics in combination with magmatic processes, as suggested by the presence of tuffites and pillow lava intercalations within the re-sedimented carbonate series. These volcanics point to a major role of crustal shear as a trigger for mass transport deposit emplacement. The facies distribution along the Western Sicily Cretaceous Escarpment delivers new insights into the deformation processes accompanying the crustal extension of the Cretaceous western Tethys realm.  相似文献   

Regularized tomographic inversion with geological constraints          下载免费PDF全文

Vincenzo Lipari  Domenico Urbano  Emmanuel Spadavecchia  Jacopo Panizzardi  Nicola Bienati 《Geophysical Prospecting》2017,65(1):305-315

Reflection tomography is the industry standard tool for velocity model building, but it is also an ill‐posed inverse problem as its solution is not unique. The usual way to obtain an acceptable result is to regularize tomography by feeding the inversion with some a priori information. The simplest regularization forces the solution to be smooth, implicitly assuming that seismic velocity exhibits some degree of spatial correlation. However, velocity is a rock property; thus, the geometry and structure of rock formations should drive correlation in velocity depth models. This observation calls for constraints driven by geological models. In this work, we present a set of structural constraints that feed reflection tomography with geometrical information. These constraints impose the desired characteristics (flatness, shape, position, etc.) on imaged reflectors but act on the velocity update. Failure to respect the constraints indicates either velocity inaccuracies or wrong assumptions concerning the constraints. Reflection tomography with structural constraints is a flexible framework that can be specialized in order to achieve different goals: among others, to flatten the base of salt bodies or detachment surfaces, to recover the horizontalness of oil–water contacts, or to impose the co‐location of the same imaged horizon between PP and PS images. The straightforward application of structural constraints is that of regularizing tomography through geological information, particularly at the latest stages of the depth imaging workflow, when the depth migration structural setting reached a consistent geological interpretation. Structural constraints are also useful in minimizing the well‐to‐seismic mis‐ties. Moreover, they can be used as a tool to check the consistency of interpreters' hypothesis with seismic data. Indeed, inversion with structural constraints will preserve image focusing only if the interpreters' insights are consistent with the data. Results from synthetic and real data demonstrate the effectiveness of reflection tomography with structural constraints.  相似文献   

Seismic displacement-based design of embedded retaining structures     

Manuela Cecconi  Vincenzo Pane  Alessia Vecchietti 《Bulletin of Earthquake Engineering》2015,13(7):1979-2001

  相似文献