Results of deep reflection seismic profiling in the Oberpfalz (Bavaria)     

DEKORP Research Group 《Geophysical Journal International》1987,89(1):353-360

Summary. In order to investigate the target area of the Continental Deep Drilling (KTB) in the Oberpfalz a network of six seismic reflection lines was acquired in 1985 using the Vibroseis technique. The average length of these lines was 50 km. In addition, the 185 km long NW/SE striking line DEKORP 4 with its short appendix line 4-Q of 40 km length was acquired with the same technique. The results reveal a strongly structured upper crust. This is in contrast with previous surveys in the German Variscides which show a poorly reflective upper crust and a strongly reflective lower crust. Except for the S part of DEKORP 4 in the Oberpfalz area the Mono is only weakly reflective. In addition to the Vibroseis survey 96 shots along line DEKORP 4 were recorded by conventional reflection techniques and by portable reflection and refraction stations from university institutes and geological surveys in order to obtain wide-angle reflection and expanding spread data.  相似文献   

Crustal structure at the easternmost termination of the Variscan belt based on CELEBRATION 2000 and ALP 2002 data     

P. Hrubcov  P. roda  CELEBRATION Working Group 《Tectonophysics》2008,460(1-4):55-75

The eastern margin of the Variscan belt in Europe comprises plate boundaries between continental blocks and terranes formed during different tectonic events. The crustal structure of that complicated area was studied using the data of the international refraction experiments CELEBRATION 2000 and ALP 2002. The seismic data were acquired along SW–NE oriented refraction and wide-angle reflection profiles CEL10 and ALP04 starting in the Eastern Alps, passing through the Moravo-Silesian zone of the Bohemian Massif and the Fore-Sudetic Monocline, and terminating in the TESZ in Poland. The data were interpreted by seismic tomographic inversion and by 2-D trial-and-error forward modelling of the P waves. Velocity models determine different types of the crust–mantle transition, reflecting variable crustal thickness and delimiting contacts of tectonic units in depth. In the Alpine area, few km thick LVZ with the Vp of 5.1 km s^− 1 dipping to the SW and outcropping at the surface represents the Molasse and Helvetic Flysch sediments overthrust by the Northern Calcareous Alps with higher velocities. In the Bohemian Massif, lower velocities in the range of 5.0–5.6 km s^− 1 down to a depth of 5 km might represent the SE termination of the Elbe Fault Zone. The Fore-Sudetic Monocline and the TESZ are covered by sediments with the velocities in the range of 3.6–5.5 km s^− 1 to the maximum depth of 15 km beneath the Mid-Polish Trough. The Moho in the Eastern Alps is dipping to the SW reaching the depth of 43–45 km. The lower crust at the eastern margin of the Bohemian Massif is characterized by elevated velocities and high Vp gradient, which seems to be a characteristic feature of the Moravo-Silesian. Slightly different properties in the Moravian and Silesian units might be attributed to varying distances of the profile from the Moldanubian Thrust front as well as a different type of contact of the Brunia with the Moldanubian and its northern root sector. The Moho beneath the Fore-Sudetic Monocline is the most pronounced and is interpreted as the first-order discontinuity at a depth of 30 km.  相似文献   

A Nonlinear Model of Surf Beat     

Nicholas Dodd 《中国海洋工程》1995,(2)

A nonlinear short-wave-averaged (surf beat) model is presented. The model is based on that of Roelvink (1993), but the numerical techniques used in the solution are based on the so-called weighted-averaged flux (WAF) method (eg Watson et al., 1992), with time-operator splitting used for the treatment of some of the source terms. This method allows a small number of computational points to be used, and is particularly efficient in modelling breaking long waves. The short-wave (or primary-wave) energy equation is solved using a more traditional Lax-Wendroff technique. Results of validation indicate that the model performs satisfactorily in most respects.  相似文献   

咸淡水养殖梭鱼的自然繁殖观察和人工繁殖试验     

中国科学院海洋研究所海洋鱼类繁殖研究组 《海洋科学集刊》1978,(14):29-68

梭鱼(Mugil so-iuy Basilewsky)为我国北方咸淡水鱼类人工养殖的主要对象,南方也有养殖,属鲻科鱼类,广泛分布于热带和亚热带水域。其中尤以鲻鱼(Mugil cephalus B.)为甚。由于它们中的大多数种类适盐性广、食物链低、生长快和肉味美,因而成为海水,咸淡水,乃至淡水鱼类养殖的很好对象。主要养于印度-太平洋区域、地中海和黑海沿岸。1969年,在保加利亚瓦尔纳召开的国际生物学计划海洋生产力组(IBP/PM)的会议上,与联合国粮农组织(PAO)一道,把鲻科鱼类列为国际性生物研究课题之一,受到有关国家的普遍重视。近十多年,对于鲻科鱼类的人工繁殖研究,在某些种类上已取得较大进展。鲻梭鱼,可期在几年内,进入种苗的生产阶段。 我国劳动人民对鲻科鱼类养殖至少已有四个世纪的悠久历史,积累了极为丰富的生产经验。但自古以来,都是利用天然种苗进行养殖。近年来,由于大量兴修水利,淡水入海的运流量不断减少,天然种苗场受到某些影响,能捕到的天然苗也不如以往丰盛,加之种苗资源本身因受气象的影响各年也有所变动。为了使生产能按计划进行,人工繁殖种苗已成为当务之急。 1967年,我所和原天津淡水渔业公司工农养殖场合作,对咸淡水养殖梭鱼的人工繁殖开始进行研究。并在人工诱导排卵方面取得成功,所获卵子得到受精和孵化。1968年,中国科学院实验生物研究所的部分同志也参加了这项试验。当年共获得一千万卵子,其中有二百万卵子获得受精。孵苗十四万多尾。因受寒潮影响,大量胚卵在即将孵出前,或在孵出仔鱼之后不久死去。最后仅培育九百余尾达2公分以上的梭鱼苗。这一年的试验,为咸淡水养殖梭鱼的全人工繁殖打开了"通途"。1969年,养殖场由地方移交给部队,我所继而与中国人民解放军某部队进行合作,一直到1972年截止。1969年,室外池塘育苗成活率达30%,育成6厘米以上的梭鱼苗二千尾左右。这些苗经过越冬,到第二年春天,体长达20厘米以上。1972年,经过人工诱导排卵的亲鱼,在池塘中自行产卵和受精,并孵出仔鱼。这对咸淡水养殖梭鱼的人工繁殖来说,又迈开了新的一步。 本文总结了六年来(1967-1972)咸淡水养殖梭鱼人工繁殖试验所取得的初步成果。对咸淡水养殖梭鱼的生物学特性以及自然繁殖也作了初步观察。现将这一材料发表,供有关单位参考。  相似文献   

TRANSALP—deep crustal Vibroseis and explosive seismic profiling in the Eastern Alps     

Ewald Lüschen  Daniela Borrini  Helmut Gebrande  Bernd Lammerer  Karl Millahn  Franz Neubauer  Rinaldo Nicolich  TRANSALP Working Group   《Tectonophysics》2006,414(1-4):9

The TRANSALP consortium, comprising institutions from Italy, Austria and Germany, carried out deep seismic reflection measurements in the Eastern Alps between Munich and Venice in 1998, 1999 and 2001. In order to complement each other in resolution and depth range, the Vibroseis technique was combined with simultaneous explosive source measurements. Additionally, passive cross-line recording provided three-dimensional control and alternative north–south sections. Profits were obtained by the combination of the three methods in sectors or depths where one method alone was less successful.The TRANSALP sections clearly image a thin-skinned wedge of tectonic nappes at the northern Alpine front zone, unexpected graben or half-graben structures within the European basement, and, thick-skinned back-thrusting in the southern frontal zone beneath the Dolomite Mountains. A bi-vergent structure at crustal scale is directed from the Alpine axis to the external parts. The Tauern Window obviously forms the hanging wall ramp anticline above a southward dipping, deep reaching reflection pattern interpreted as a tectonic ramp along which the Penninic units of the Tauern Window have been up-thrusted.The upper crystalline crust appears generally transparent. The lower crust in the European domain is characterized by a 6–7 km thick laminated structure. On the Adriatic side the lower crust displays a much thicker or twofold reflective pattern. The crustal root at about 55 km depth is shifted around 50 km to the south with respect to the main Alpine crest.  相似文献   

The Tornquist Zone, a north east inclining lithospheric transition at the south western margin of the Baltic Shield: Revealed through a nonlinear teleseismic tomographic inversion     

P. Voss  K. Mosegaard  S. Gregersen  TOR Working Group 《Tectonophysics》2006,416(1-4):151

From July 1996 to August 1997 the TOR project operated 130 seismographs in North Germany, Denmark and South Sweden, with the aim of collecting signals from local, regional and teleseismic earthquakes. This data set is particularly interesting since the seismic antenna crosses the most significant geological boundary in Europe, the Tornquist Zone, which in the northern part is the border between the Baltic Shield and the younger European lithosphere. Previous studies have shown significant physical changes in the crust and upper mantle across this transition zone, including two independent teleseismic tomographic studies of the TOR data set. But these two studies disagree on the orientation of the slope of the transition. Both studies used an iterative linearized inversion method. We will in this work Preprint submitted to Elsevier Science 27 July 2005 present an inversion based on Bayesian statistics, where the solution space is examined in order to study a very large number of tomographic solutions and to examine the solution uniqueness and uncertainty. The method is applied to measurements of 3345 relative teleseismic P-phase travel times from 48 teleseismic earthquakes with good azimuthal coverage with respect to the great circle arc of the TOR array. We find the lithospheric transition to be a north east inclination of around 30° to 45° off vertical.  相似文献   

深层地震勘探激发井深探讨     

HUANG Ling YANG Guang-da HAN Li-guo .Geophysical Exploration Company of Jilin Petroleum Group Co.  Ltd  Songyuan  China .Jilin Petroleum Group Company  Songyuan    China .College of GeoExploration Science  Technology  Jilin University  Changchun  China 《吉林大学学报(地球科学版)》2006,(Z2)

深层地震勘探野外资料采集的关键是在保证原始资料一定信噪比的基础上,同时兼顾分辨率,激发井深是决定资料品质的重要因素之一。通过对虚反射滤波作用分析,提出了充分利用虚反射能量设计最佳激发井深,增强下传地震波能量的采集方法。理论分析和试验资料表明,在高速层下4～7m的最佳激发岩性深度是深层勘探的理想井深。  相似文献   

吸水剖面综合解释方法及应用     

ZHANG Jian-min ZHAO Yong-zhong XU Jing HUANG Juan The Logging Company  Jilin Petroleum Group Co.  Ltd  Songyuan  Jilin  China 《吉林大学学报(地球科学版)》2006,(Z2)

吉林油田同位素吸水剖面测井采用~(113)In同位素追踪技术,根据同位素追踪过程解释基本可以判断配水层段吸水情况。但是在注水井存在沾污、大孔道以及串槽等影响时,吸水面积确定比较困难。在同位素测井中增加井温、流量参数,通过多参数综合解释,不仅可以对沾污影响进行合理校正,确定准确的小层吸水量,而且能够正确判断各级封隔器、配水器的工作情况,在地层存在大孔道的情况下,确定地层的吸水面积。吸水剖面综合解释方法在吉林油田已普遍应用,见到明显的效果。  相似文献   

贯彻党风廉政建设责任制重在抓落实     

山西省气象局党组纪检组 《山西气象》2002,(4):44-46

近年来,山西省气象局在上级部门的领导下,坚持以邓小平理论、党的基本路线和十五大、十六大精神为指导,认真坚持从严治党方针,按照党风廉政建设和反腐败三项任务一齐抓的工作格局,紧密结合气象部门实际,围绕全省气象工作会议提出的目标任务,以改革创新的精神,坚持标本兼治,狠抓任务落实,加大了从源头上预防和治理腐败的工作力度,取得了党风廉政建设和反腐败斗争的新成效,有力地促进了两个文明建设和各项工作任务的顺利完成。  相似文献   

Imaging the Dead Sea Transform with scattered seismic waves   总被引：2，自引：0，他引：2  

N. Maercklin  C. Haberland  T. Ryberg  M. Weber  Y. Bartov  the DESERT Group 《Geophysical Journal International》2004,158(1):179-186

  相似文献