An improved input energy spectrum verified by the shake table tests     

Ahmet Güllü  Ercan Yüksel  Cem Yalçın  A. Anıl Dindar  Hasan Özkaynak  Oral Büyüköztürk 《地震工程与结构动力学》2019,48(1):27-45

Input energy is the principal component of the energy balance equation. It is beneficial to determine, through its components, how the recoverable and irrecoverable energies are distributed within the structural elements. Several equations and attenuation relations to define mass-normalized input energy spectra exist in the literature. They are mainly proposed for elastic systems subjected to far-fault EQs. There is a lack of experimental verification of these proposed spectra. In this paper, experimental assessment was performed to the existing spectra, and further improvements were accomplished. For this purpose, steel cantilever columns were tested on the shake table for two specific historical EQs coincidently having similar spectral acceleration values. Based on the experimental results, a three-part mass-normalized relative input energy spectrum was formulated including soil type, EQ (corner period, intensity, duration, spectral acceleration, and velocity), and structural behavioral characteristics (period and structural damping). The proposed input energy spectrum was experimentally calibrated and numerically validated for various EQs featuring near- and far-field types. Analytical and experimental comparisons were made between the previously developed spectrum and the newly proposed one. The validation studies and the statistical evaluations exposed that the proposed spectrum yielded better agreement with the experimental and numerical results.  相似文献   

Constraints on unconsolidated pyroclastic flow sediments related REE enrichments originated from potassic-alkaline Gölcük stratovolcano: Darıdere-Direkli-Yakaören (DDY) table 4deposits,southwestern Anatolia of Turkey     

Budakoglu  Murat  Unluer  Ali Tugcan  Doner  Zeynep  Kocaturk  Huseyin  Kaya  Mustafa  Kumral  Mustafa  Kirikoglu  M. Sezai 《中国地球化学学报》2021,40(6):926-944

Acta Geochimica - In the last five decades, Rare Earth Elements (REE) are mostly produced from carbonatite complexes and alkaline magmatic environments. In this respect, pyroclastic flows produced...  相似文献   

Impact of different sampling rates on precise point positioning performance using online processing service     

Serdar Erol  Reha Metin Alkan  ?.Murat Ozulu  Veli Il?i 《地球空间信息科学学报》2021,24(2):302-312

In this study, the effect of different sampling rates (i.e. observation recording interval) on the Precise Point Positioning (PPP) solutions in terms of accuracy was investigated. For this purpose, a field test was carried out in ?orum province, Turkey, on 11 September 2019. Within this context, a Geodetic Point (GP) was established and precisely coordinated. A static GNSS measurement was occupied on the GP for about 4-hour time at 0.10 second (s)/10 Hz measurement intervals with the Trimble R10 geodetic grade GNSS receiver. The original observation file was converted to RINEX format and then decimated into the different data sampling rates as 0.2 s, 0.5 s, 1 s, 5 s, 10 s, 30 s, 60 s, and 120 s. All these RINEX observation files were submitted to the Canadian Spatial Reference System-Precise Point Positioning (CSRS-PPP) online processing service the day after the data collection date by choosing both static and kinematic processing options. In this way, PPP-derived static coordinates, and the kinematic coordinates of each measurement epoch were calculated. The PPP-derived coordinates obtained from each decimated sampling intervals were compared to known coordinates of the GP for northing, easting, 2D position, and height components. According to the static and kinematic processing results, high data sampling rates did not change the PPP solutions in terms of accuracy when compared to the results obtained using lower sampling rates. The results of this study imply that it was not necessary to collect GNSS data with high-rate intervals for many surveying projects requiring cm-level accuracy.  相似文献   

Determination of the Effect of Aeration Rate on Composting of Vegetable–Fruit Wastes     

Ayhan Ünlü  Murat Topal 《洁净——土壤、空气、水》2011,39(11):1014-1021

In this study, it was aimed to determine the effect of various aeration rates on composting to supply the optimum aeration rate for a successful and economic composting. For this aim, vegetable–fruit wastes (VFW) were composted at various aeration rates (0.37, 0.49, 0.62, 0.74, 0.86, and 0.99 L/min kg VS) and moisture, temperature, pH, electrical conductivity, C/N, and cellulose were investigated. Moistures of the reactor that had the highest aeration were generally lower than those of the others. Reactor that had the lowest aeration reached thermophilic phase earlier than the others and stayed more days. This situation was opposite for the reactor that had the highest aeration. pH variations with aeration rates were not significant. Although electrical conductivity did not differ significantly with aeration rates, at the beginning of the thermophilic phase it generally increased with the increase in aeration. The highest C/N reduction was observed in the reactor that had an aeration of 0.62 L/min kg VS. The final cellulose contents were close to each other. It could be said that aeration rates used were efficient on composting of VFW. Taking the C/N into account which is the parameter of the indicator of the stabilization in composting, it could be said that the optimum aeration rate for forced aerobic composting of VFW was 0.62 L/min kg VS.  相似文献   

Regional vertical total electron content (VTEC) modeling together with satellite and receiver differential code biases (DCBs) using semi-parametric multivariate adaptive regression B-splines (SP-BMARS)   总被引：3，自引：2，他引：1  

Murat Durmaz  Mahmut Onur Karslioglu 《Journal of Geodesy》2015,89(4):347-360

  相似文献   

A rapid seismic safety assessment method for mid-rise reinforced concrete buildings     

Onur Kaplan  Yucel Guney  Ahmet Topcu  Yunus Ozcelikors 《Bulletin of Earthquake Engineering》2018,16(2):889-915

The majority of existing buildings are not safe against earthquakes in most of the developing countries. Existing building stocks should be assessed with a seismic safety assessment method before a devastating earthquake. Cheaper and quicker rapid seismic safety assessment methods can be used instead of code-based assessment methods to determine the seismic performance of existing buildings. In this study, an approach was introduced to determine the seismic performance of existing mid-rise reinforced concrete buildings with fewer parameters and process steps than code-based detailed assessment procedures. Calibration and regulation of the introduced method were conducted on the 39 collapsed buildings’ projects in 1999 Kocaeli, Turkey, earthquake. Finally, 55 existing buildings located in Eskisehir, Turkey, assessed with this calibrated method and the results were compared with the results of a code-based detailed assessment method; the results showed a very good agreement of about 83%. This study shows that the proposed method can be applied for the determination of the seismic performance of existing mid-rise reinforced concrete buildings quickly and without compromising reliability.  相似文献   

The 2014 Earthquake Model of the Middle East: seismogenic sources     

Laurentiu Danciu  Karin Şeşetyan  Mine Demircioglu  Levent Gülen  Mehdi Zare  Roberto Basili  Ata Elias  Shota Adamia  Nino Tsereteli  Hilal Yalçın  Murat Utkucu  Muhammad Asif Khan  Mohammad Sayab  Khaled Hessami  Andrea N. Rovida  Massimiliano Stucchi  Jean-Pierre Burg  Arkady Karakhanian  Hektor Babayan  Mher Avanesyan  Tahir Mammadli  Mahmood Al-Qaryouti  Doğan Kalafat  Otar Varazanashvili  Mustafa Erdik  Domenico Giardini 《Bulletin of Earthquake Engineering》2018,16(8):3465-3496

  相似文献   

High Resolution Optical Spectroscopy of a B-type Abundance Standard Candidate in Ori OB1—HD 35039     

Şahin  Timur  Dervişoğlu  Ahmet 《Astronomy Letters》2019,45(8):528-545

Astronomy Letters - We present LTE analysis of high resolution optical spectra for the B-type abundance standard candidate HD 35039 (HR 1765, 22 Ori) with an ambigous binary nature. The spectra...  相似文献   

Investigation of trace metals distribution in water,sediments and wetland plants of K(i)z(i)l(i)rmak Delta,Turkey     

Mehmet Soner Engin  Ahmet Uyanik  Seydahmet Cay 《国际泥沙研究》2017,32(1)

In this study,accumulation and distribution of Pb,Cu,Zn,Co,Ni,Mn and Fe in water,bottom sediments and four plant species (Myriophyllum verticillatum,Hydrocharis morsus-ranae,Nymphaea alba and Typha latifolia) were investigated in (C)ernek Lake of Kizihrmak Delta.The Kizdirmak Delta is one of the largest natural wetlands of Turkey and it is protected by the Ramsar convention since 1993.Selected physico-chemical parameters such as pH,conductivity and dissolved oxygen and also trace metal concentrations were monitored in water.All the parameters obtained were found higher than that of the national standards for the protected lakes and reserves.The accumulated amounts of various trace metals in bottom sediments and wetland plants were found in the following order of Fe ＞ Mn ＞ Zn ＞ Ni ＞ Co ＞ Cu ＞ Pb and Fe ＞ Mn ＞ Zn ＞ Ni ＞ Co respectively.The historical trace metal intake of Myriophyllum verticillatum,Hydrocharis morsus-ranae,Typha latifolia and Nymphaea alba were obtained higher than that of the toxic metal levels and these plants may be accepted as accumulators for the detected trace metals and also bioindicators in the historically polluted natural areas.  相似文献   

Bending of orthotropic super-elliptical plates on intermediate point supports     

Murat Altekin 《Ocean Engineering》2010,37(11-12):1048-1060

Bending analysis of orthotropic super-elliptical plates of uniform thickness was investigated. Optimum location of the point supports was searched by minimizing the maximum absolute deflection. The support location which minimizes the bending moments at the supports was reported. The Ritz method was used and the total potential energy functional was modified by introducing the Lagrange multipliers to improve the accuracy of the stress resultants. The deflection and the bending moments computed at various points for a large variety of plate shapes ranging from an ellipse to a rectangle were checked with those of rectangular and elliptical plates. Good agreement was obtained for both cases. The structural response was found to be sensitive to support position.  相似文献