On the orthogonality of surface wave eigenfunctions in cylindrical coordinates     

M. G. Bostock 《Geophysical Journal International》1990,103(3):763-767

  相似文献   

利用高光谱数据进行植被生化成分反演方法研究   总被引：3，自引：0，他引：3  

张凤丽  万余庆 《地球信息科学学报》2001,3(4):71-75

高光谱数据包含着丰富光谱信息,能够定量地分析物质成分^[1]。由高光谱数据,可以运用多元逐步线性回归方法反演植被生化组分含量,从而达到监测植被生长状况的目的^[2]。本文具体介绍了多元逐步线性回归方法,及其在氮、木质素和纤维素含量估算中的应用。  相似文献   

基于坐标归一化和奇异值分解的直接线性变换解法   总被引：2，自引：0，他引：2  

周拥军  寇新建 《测绘科学》2008,(Z1)

直接线性变换方法是数字摄影测量和计算机视觉领域最常用的解析处理方法之一,特别适用于未检校数码相机的三维测量,但直接线性参数间的相关性、物方控制的约束和设计矩阵元素数量级的较大差异,均可导致法矩阵严重病态,从而影响解的稳定性。本文借鉴改进的八点基本矩阵估计算法,采用基于坐标归一化和奇异值分解的解法,即首先将像点和物点坐标进行相似变换得到归一化坐标后组成法矩阵,其次利用矩阵奇异值分解方法代替常规的最小二乘方法,模拟和真实数据表明,此方法可以有效提高解算精度和稳定性。  相似文献   

Development of a remotely sensed,historical land-cover change database for rural Chihuahua,Mexico     

《International Journal of Applied Earth Observation and Geoinformation》2005,7(3):232-247

The purpose of this article is to describe the development of a remotely sensed, historical land-cover change database for the northwestern quarter of Chihuahua, Mexico, The database consists of multi-temporal land-cover classifications and change detection images. The database is developed to facilitate future investigations that examine urban–rural linkages as possible drivers of rural land-use and land-cover changes. To develop the needed land-cover change database, this study uses the North American Landsat Characterization (NALC) MSS triplicates because of their temporal depth and spatial breadth. Challenges exist, however, to effective classification and change detection using the NALC triplicates, including illumination differences across multiple scenes and periods caused by topographic and solar variations and the lack of ground reference data for historic periods. Therefore, creation of the database is a four step process. First, extensive pre-processing is performed to enhance comparability of multi-date images. Pre-processing includes topographic correction, mosaic creation and multi-date radiance normalization. Second, ancillary sources of land-cover data are combined with visual interpretations of enhanced images to define reference pixels used to classify the images using the maximum likelihood algorithm. Third, classification accuracy is assessed. Fourth, post-classification change detection is performed. Results indicate significant image improvements after pre-processing that permit very good overall classification (86.26% classified correctly) and change detection. To conclude, findings are presented that indicate significant changes to arid grasslands/shrublands and forest resources in mountainous regions.  相似文献   

水土流失评价数据库建立中的数据标准化研究--以中国潜在水土流失评价数据库为例   总被引：2，自引：0，他引：2  

马晓微  杨勤科  刘宝元 《地域研究与开发》2003,22(3):14-17,35

在水土流失评价数据库的建立研究中，涉及到数据的标准化问题。该研究以中国潜在水土流失评价数据库建立过程中的数据标准化研究为例，探讨建立适合水土流失评价数据标准化的方法。研究包括了水土流失数据标准化建设中的评价数据库的设计、数据的标准化。其中，数据的标准化包括数据的收集与分析、数据的录入、投影变换、其它格式向ARC/INFO格式的转换、补充编制专题文档等。  相似文献   

省级空间信息基础设施建设的意义及途径--以西藏自治区为例     

陶和平  刘淑珍  曹宗杰 《山地学报》2003,21(Z1):118-122

省级空间信息基础设施建设是实现信息化资源、经济、环境管理的基础,但省级空间信息基础设施发展是一项具有战略性的巨型系统工程,跨区域、跨部门、跨学科,其建设和部署必须有统一的领导和安排。文章以西藏自治区为例,根据西藏自治区目前信息化发展现状,探讨了西藏自治区省级空间信息基础设施建设的途径及意义,认为西藏省级空间信息基础设施建设的第一步是提出项目建设的框架及规划,其次根据信息化发展现状及投资力度,制订近期、中长期目标及建设内容,然后根据规划分阶段实施。最后文章讨论了西藏实施省级空间信息的重要意义,为实现西藏电子政府、指导区域经济发展提供依据。  相似文献   

应用航放资料寻找非放射性金属矿产效果探讨   总被引：1，自引：0，他引：1  

陈中华 《铀矿地质》2003,19(2):106-113

本通过对粤北地区已知的52个非放射性金属矿床（点）的地质、物化探特征的统计资料综合分析，建立了评价非放射性金属矿产成矿远景的航空能谱参数模型，结合重磁测量、重砂测量及金属量测量成果，预测了4片非放射性金属矿产成矿远景区。  相似文献   

新疆阿拉尔花岗岩MFC过程的微量元素综合效应     

刘伟 《地质论评》1997,43(5):465-475

新疆阿拉尔花岗岩的微量元素比相关图显示了线性样点列与幂函数曲线形式的样点列相 复杂图型。该图型用简单混合或者单一结果分异模型都不能解释。本文建立了混合－结晶分异复合过程的微量元素综合效应模型。模型１：从初始混合线引起害虫函数曲线束形式的结晶分异线。特殊情况有结晶分异线简化为通过原点的直线束形式或者与初始混合线重合。  相似文献   

VICARIOUS RADIOMETRIC CALIBRATION OF SATELLITE FY-ID SENSORS AT VISIBLE AND NEAR INFRARED CHANNELS          下载免费PDF全文

ZHANG Yuxiang  QIU Kangmu  HU Xiuqing  RONG Zhiguo  ZHANG Lijun 《Acta Meteorologica Sinica》2004,18(4):505-516

For the problem of in-flight test site radiometric calibration for the FY-1D Meteorological Satellite onboard sensor's visible and near infrared channels,this paper described the calibration method,satellite-ground synchronous observation data acquired at China Dunhuang Calibration Test Site,parameter derivation and radiative transfer computation during the calibration,and the calibration result analysis.At FY-1D seven channels (with central wavelength at Channels 1:630 nm,2:865 nm;6:1610 nm;7:455 nm,8:505 nm;9:555 nm;10:932 nm),calibration coefficients obtained during the ground site calibration were compared with that respectively of prelaunch calibration.It is demonstrated that results of FY-1D onboard two sensors' (A and B) at channels 1,2,6 and 10 were close to pre-calibration,and the absolute difference of Gobi desert reflectance computed using test site and pre-launch calibration coefficients was no more than 2%. At other channels,large pre-launch calibration errors resulted in a poor consistency between the test site and pre-launch calibration.The errors can be corrected by the test site calibration results. Based on a rough estimation,the overall error of the calibration was about 6%. The paper also presented the in-flight vicarious calibration at the visible and near infrared channels of FY-1C sensor A which was launched in 1999 and has been put into operational mode since 2002.The results exhibit that FY-1C sensor's response has 23% attenuation at Channels 7 and 8,while only minor degradation at the other channels was found. During the mission,calibrations were also conducted at NOAA-17's Channels 1 and 2 (1:430-830 nm,2:500-1072 nm).A very good consistency has been achieved between the test site and pre-launched calibration results.  相似文献   

Estimating the seismic displacement of friction pendulum isolators based on non‐linear response history analysis     

Keri L. Ryan  Anil K. Chopra 《地震工程与结构动力学》2004,33(3):359-373

A procedure for developing equations that estimate the isolator displacement due to strong ground motion is applied to buildings isolated with the friction pendulum system. The resulting design equations, based on rigorous non‐linear analysis, offer an alternative to the iterative equivalent‐linear methods used by current U.S. building codes. The governing equations of the system are reduced to a form such that the median normalized displacement of the system due to an ensemble of ground motions is found to depend on only the isolation period—a function of the curvature of the isolator—and the friction force at incipient slip normalized by peak ground velocity. The normalization is effective in minimizing the dispersion of the normalized displacement for an ensemble of ground motions, implying that the median normalized displacement is a reliable estimate of response. The design equations reflect the significant (20 to 38%) increase in displacement when the excitation includes two lateral components of ground motion instead of just one component. Equivalent‐linear methods are shown to underestimate by up to 30% the exact median displacement determined by non‐linear response history analysis for one component of ground motion, and building codes include at most a 4.4% increase for a second component. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献