排序方式： 共有40条查询结果，搜索用时 46 毫秒
1.
Roger Guérin 《Hydrogeology Journal》2005,13(1):251-254
2.
The proposed work is incorporated into the research theme concerning the maintenance and inspection of sensitive facilities in production systems. It is essential to promote the methodological deployment of inspection techniques to ensure the good functioning of services provided by complex production systems as well as their different components. We use a risk-based inspection methodology offering an organized analysis with knowledge sharing for collaborative possibilities in a multidisciplinary context and it consists of the following steps: data acquisition and information collection, failure analysis (probability and consequences), risk assessment, inspection plan, mitigation and revaluation. The application of this methodology can improve the maintenance management strategies of industrial companies. The inspection department is able to forecast its potential failure, root causes and impacts on the safe operation of the considered production system, based on a reliable inventory of existing situations and review options for continuous improvement in maintenance management. In particular, we addressed the application of a Risk-Based Inspection (RBI) methodology in the French petroleum company with operations on the west coast of central and southern Africa. The incorporation of expert knowledge into risk assessment is helping to find the best preventive plan for pipeline inspection in the case study. 相似文献
3.
由于信息技术的快速发展和开发工具的日趋成熟,影响管理信息系统开发成功的瓶颈已不再是以技术为主的问题,而更多的是以人为主的风险管理问题。本文主要从风险识别与评估、风险应对与监控、风险回顾与改进这四个方面,阐述了北京市测绘设计研究院设备管理信息系统开发项目的风险管理经验,证实了准确识别和评估项目所面临的风险并进行有效应对和监控,是提高项目成功率的有效手段。 相似文献
4.
绳索取心钻探时,斜孔钻进发生的埋钻事故较难处理,在松软易碎地层中埋钻事故又极难预防。经多年实践,提出事故发生后采取优化钻孔井身结构,结合爆破法处理有效省时,节约成本又减少损失。 相似文献
5.
简要介绍了瞬变电磁法原理和特点、WDC－2B型瞬变电磁勘探系统及其野外工作方法。在充分考虑富盛铅锌矿地质矿产和物性特征的基础上，重点应用重叠回线装置，研究已知矿体上方的瞬变电磁响应特征及其与地质矿产的联系，提出了在富盛铅锌矿地质物性条件下，瞬变电磁响应模式为“上凹下凸”，同时对矿区外围发现的瞬变电磁响应异常，结合矿区的地质物性资料进行了初步解释。 相似文献
6.
大陆科学钻探是获取地下实物信息的唯一手段, 具有钻进地层条件复杂、取芯要求特殊、对钻探工具及装备要求高等特点。美国和德国的先进钻探装备代表了国际深部钻探装备的发展方向; 近十年来, 国内深井和超深井钻机研制取得了较快发展; 本文着重分析了美国NOV理想钻机、德国海瑞克TI-350全液压钻机、中国“地壳一号”万米钻机。国际大陆科学钻探装备关键技术包括顶部驱动钻井技术、钻探装备自动化技术、钻探装备信息化技术。顶部驱动钻井技术利用顶驱装置取代孔口转盘驱动钻杆回转, 钻井作业的能力和效率得到显著提高; 钻探装备自动化技术以实现安全、可靠、高效地运移及拧卸钻具为目的, 主要包括自动猫道、自动摆排管装置和自动上卸扣装置; 钻探装备信息化技术是伴随着现代机电液一体化控制技术和随钻测量技术发展起来的, 通过对地面与井下数据的联合分析, 实现数据综合解释和自主钻进。未来深部大陆科学钻探装备的研制应秉承安全、可靠、高效、节能、舒适的设计理念, 以实现自动化、智能化、信息化钻井为发展目标。 相似文献
7.
所述的有源带通滤波器是采用现代网络理论，通过查图表反复计算数值调试并利用多项式综合滤波器的设计理论得到的设计结果，从频率响应特性曲线和电路结构可见，它完全满足了设计时所提供的各项技术指标的要求。文中详细地讨论了由单元电路到全极点多反馈滤波网络电路设计时的理论根据，各支路参数实际的计算和调试方法。这种电路结构简单合理，调试和维修十分方便，代替了无源滤波器中的大型电感和电容，有利于设备小型化。 相似文献
8.
R. I. Acworth 《Hydrogeology Journal》2007,15(7):1279-1289
The vertical hydraulic gradient in an unconfined sand aquifer frequently exceeds the horizontal gradient when measured close to a surface discharge boundary, around an abstraction bore or close to a saline interface. The vertical gradient can be efficiently investigated using a multi-channel manometer board connected to a bundled piezometer installed using hollow-stem-auger-drilling techniques. The design and construction of a manometer board is described. Manometer board data from a site in a 30-m-deep fresh-water aquifer adjacent to a pumping bore are described. The bore is screened in the lower part of the aquifer and the impacts of partial penetration are evident on the manometer board results. Data are then described from the centre of a coastal sand spit where fresh water overlies saline water. Fluid electrical conductivity measurements from the individual tubes of the bundled piezometer are used to derive fluid density at each of the bundled piezometer ports. The average fluid density of water above the mini-piezometer port at each depth is then calculated using Gaussian quadrature. The environmental-water head profiles are compared to point-water and fresh-water head profiles and the implications of the incorrect use of point-water or fresh-water head vertical profiles are clearly demonstrated. 相似文献
9.
Hirokazu Iemura Touraj Taghikhany Sarvesh K. Jain 《Bulletin of Earthquake Engineering》2007,5(1):85-103
Seismic isolation is one of the effective methods to protect equipments. It helps to keep seismic response accelerations in
equipment below its allowable limits. Among different types of isolation systems, the combination of restoring spring and
slider, also called as resilient sliding isolation (RSI) system, is the one which has been effectively used for protection
of equipment. Principal design parameters for this type of isolation system are period of system (stiffness of spring) and
friction coefficient of slider. There may be number of combinations of these design parameters which can enable the isolated
equipment to remain functional during and after the predicted seismic event. The optimum design of RSI system can be considered
as the one which maintains the response acceleration in the equipment below its allowable limit and at the same time keeps
the relative displacement between floor and the equipment to the minimum. This study deals with optimum design of resilient
sliding system. First the RSI system is modeled analytically by (i) precise and (ii) simplified SDOF models. The accuracy
of the model is then validated by shaking table tests. The validated simplified SDOF model is then used to determine optimum
design parameters for different levels of allowable accelerations. Results show that the optimum period decreases and the
optimum friction coefficient increases with higher allowable acceleration. 相似文献
10.
