Mechanical models of fracture reactivation and slip on bedding surfaces during folding of the asymmetric anticline at Sheep Mountain, Wyoming     

Pablo F. Sanz  David D. Pollard  Patricia F. Allwardt  Ronaldo I. Borja 《Journal of Structural Geology》2008,30(9):1177-1191

  相似文献   

Influence of Structural Non-Stationarity of Surface Roughness on Morphological Characterization and Mechanical Deformation of Rock Joints   总被引：2，自引：2，他引：0  

N. Fardin 《Rock Mechanics and Rock Engineering》2008,41(2):267-297

Summary Structural non-stationarity of surface roughness affects accurate morphological characterization as well as mechanical behaviour of rock joints at the laboratory scale using samples with a size below the stationarity threshold. In this paper, the effect of structural non-stationarity of surface roughness is investigated by studying the scale dependence of surface roughness and mechanical behaviour of rock joints. The results show that the structural non-stationarity mainly affects the accurate characterization of the surface roughness of the fracture samples. It also controls the amount and location of the contact areas during shear tests, which in turn affects the mechanical properties and asperity degradation of the samples. It is concluded that for accurate determination of the morphological and mechanical properties of rock joints at laboratory and field scales, samples with size equal to or larger than the stationarity threshold are required. Author’s address: Nader Fardin, Rock Mechanics Group, Department of Mining Engineering, Faculty of Engineering, University of Tehran, P.O. Box: 11365/4563, Tehran, Iran  相似文献   

江苏大丰潮滩潮流边界层特征研究   总被引：7，自引：0，他引：7  

李占海  高抒  陈沈良 《海洋工程》2007,25(3):53-60

2003年7月中小潮期间使用MIDAS-400用户化数据采集系统在江苏大丰潮滩上进行了垂向多层位同步的流速和悬沙浓度观测。根据观测资料研究了潮流作用下的潮滩底部边界层过程,结果表明,观测地点的潮汐不对称现象十分明显,落潮流速、历时和输水输沙量皆明显大于涨潮;在潮周期内的多数时间里流速剖面符合对数分布,但在风力较强、水流快速增加和流速缓慢的情况下,流速剖面常偏离对数分布;悬沙颗粒垂向混合均匀,悬沙浓度剖面符合Rouse公式;落潮时的底部切应力和摩阻流速明显大于涨潮,摩阻流速与各水层流速通常有较好的线性关系;滩面糙度主要与沙纹形态和推移质运动强度有关,它与摩阻流速存在密切关系;悬沙浓度具有明显的减阻效应,受其影响,摩阻流速和底部切应力分别减小了28%~41%和40%~62%。  相似文献   

Drag Coefficient,Dynamic Roughness and Reference Wind Speed     

Paul?A.?HwangEmail author 《Journal of Oceanography》2005,61(3):399-413

Surface waves are the roughness element of the ocean surface. The parameterization of the drag coefficient of the ocean surface is simplified by referencing to wind speed at an elevation proportional to the characteristic wavelength. The dynamic roughness is analytically related to the drag coefficient. Under the assumption of fetch limited wave growth condition, various empirical functions of the dynamic roughness can be converted to equivalent expressions for comparison. For datasets covering a wide range of the dimensionless frequency (inverse wave age), it is important to account for the variable rate of wave development at different wave ages. As a result, the dependence of the Charnock parameter on wave age is nonmonotonic. Finally, the analysis presented here suggests that the significant wave steepness is a sensitive property of the ocean surface and a single variable normalization of the dynamic roughness using a wavelength or wave height parameter actually produces more robust functions than bi-variable normalizations using wave height and wave slope.  相似文献   

Numerical Simulation of Residual Circulation due to Bottom Rouglmess Variability Under Tidal Flows in A Semi-Enclosed Bay     

槐文信  T.  Komatsu  曾小辉 《中国海洋工程》2005,19(4):601-612

Nowadays there are some chronic serious environmental problems, such as eutrophication, blue tide and so on, in a complicated coastal zone or a semi-enclosed bay, because the water exchanges between an inner bay and an outer sea is weak compared with the supply of contaminant. Under this situation, a method to improve the water quality by 3-dimensional small unsymmetrical structures has been proposed by Komatsu et al. In this paper, several numerical simulations of the tidal current and concentration for various arrangements of bottom roughness in a semi-enclosed model bay are carfled out with a depth-averaged 2-D numerical model. The model is solved by the hybrid finite analytic method with nonstaggered grid. And the SIMPLES algorithm with Rhie and Chow＇ s momentum interpolation technique is used for the simulation. The effect of Komatsu＇ s method for water purification is examined by numerical simulation. The result of numerical experiment indicates that it is possible to generate a new tidal residual current and to activate a tidal exchange by bottom roughness arrangement only.  相似文献   

The sequence of sediment behaviour during wave-induced liquefaction   总被引：4，自引：0，他引：4  

B. MUTLU SUMER  FIGEN HATIPOGLU  JØRGEN FREDSØE  S. KAAN SUMER 《Sedimentology》2006,53(3):611-629

This paper presents the results of an experimental investigation of the complete sequence of sediment behaviour beneath progressive waves. The sediment was silty with d ₅₀ = 0.060 mm. Two kinds of measurements were carried out: pore-water pressure measurements (across the sediment depth), and water-surface elevation measurements. The process of liquefaction/compaction was videotaped from the side simultaneously with the pressure and water-surface elevation measurements. The video records were then analysed to measure: (i) the time development of the mudline, (ii) the time development of liquefaction and compaction fronts in the sediment and (iii) the characteristics of the orbital motion of the liquefied sediment including the motion of the interface between the water body and the sediment. The ranges of the various quantities in the tests were: wave height, H  = 9–17 cm, wave period, T  = 1.6 sec, water depth = 42 cm, and the Shields parameter = 0.34–0.59. The experiments reveal that, with the introduction of waves, excess pore pressure builds up, which is followed by liquefaction during which internal waves are experienced at the interface of the water body and the liquefied sediment, the sequence of processes known from a previous investigation. This sequence of processes is followed by dissipation of the accumulated excess pore pressure and compaction of the sediment which is followed by the formation of bed ripples. The present results regarding the dissipation and compaction appear to be in agreement with recent centrifuge wave-tank experiments. As for the final stage of the sequence of processes (formation of ripples), the ripple steepness (normalized with the angle of repose) for sediment with liquefaction history is found to be the same as that in sediment with no liquefaction history.  相似文献   

Investigation of the effect of aggregate shape and surface roughness on the slake durability index using the fractal dimension approach     

Ersin Kolay  Kamil Kayabali   《Engineering Geology》2006,86(4):271-284

Argillaceous rocks cover about one thirds of the earth's surface. The major engineering problems encountered with weak- to medium-strength argillaceous rocks could be slaking, erosion, slope stability, settlement, and reduction in strength. One of the key properties for classifying and determining the behavior of such rocks is the slake durability. The concept of slake durability index (SDI) has been the subject of numerous researches in which a number of factors affecting the numerical value of SDI were investigated. In this regard, this paper approaches the matter by evaluating the effects of overall shape and surface roughness of the testing material on the outcome of slake durability indices.

For the purpose, different types of rocks (marl, clayey limestone, tuff, sandstone, weathered granite) were broken into chunks and were intentionally shaped as angular, subangular, and rounded and tested for slake durability. Before testing the aggregate pieces of each rock type, their surface roughness was determined by using the fractal dimension. Despite the variation of final values of SDI test results (values of I_d), the rounded aggregate groups plot relatively in a narrow range, but a greater scatter was obtained for the angular and subangular aggregate groups. The best results can be obtained when using the well rounded samples having the lowest fractal values. An attempt was made to analytically link the surface roughness with the I_d parameter and an empirical relationship was proposed. A chart for various fractal values of surface roughness to use as a guide for slake durability tests is also proposed. The method proposed herein becomes efficient when well rounded aggregates are not available. In such condition, the approximate fractal value for the surface roughness profile of the testing aggregates could be obtained from the proposed chart and be plugged into the empirical relation to obtain the corrected I_d value. The results presented herein represent the particular rock types used in this study and care should be taken when applying these methods to different type of rocks.  相似文献   

滇中震旦系碳酸盐岩破碎地层的钻探护孔新技术   总被引：1，自引：1，他引：1  

毛毓坤 《云南地质》2003,22(2):206-210

破碎地层中钻探，采用有效的护孔技术是避免孔内事故发生的重要手段，同时也是保证完成钻探各项技术经济指标的先决条件。本文阐述了在具代表性的磷矿破碎地层中钻进所遇到的护孔难题及其所采用的护孔新技术、新方法。  相似文献   

Organic litter: dominance over stones as a source of interrill flow roughness on low‐gradient desert slopes at Fowlers Gap,arid western NSW,Australia     

David Dunkerley 《地球表面变化过程与地形》2003,28(1):15-29

Thirty‐six runoff plot experiments provide data on flow depths, speeds, and Darcy–Weisbach friction coefficients (f) on bare soil surfaces, and surfaces to which were added sufficient extra plant litter or surface stones to provide projected cover of 5, 10 and 20 per cent. Precision flow depth data were derived with a computer‐controlled gantry and needle gauge for two different discharges for each plot treatment. Taking a fixed flow intensity (Reynolds number, Re = 150) for purposes of comparison shows means of f = 17·7 for bare soil surfaces, f = 11·4 for added stone treatments, and f = 23·8 for added litter treatments. Many individual values of f for stone treatments are lower than for the bare soil surface, but all litter treatments show increases in fcompared to bare soil. The lowering of f in stone treatments relates to the submerged volume that the stones occupied, and the associated concentration of flow onto a smaller part of the plot surface. This leads to locally higher flow intensities and lower frictional drag along threads of flow that the obstacles create. Litter causes higher frictional drag because the particles are smaller, and, for the same cover fraction, are 100 times more numerous and provide 20 times the edge or perimeter length. Along these edges, which in total exceed 2·5 m g^?1 (equivalent to 500 m m^?2 for a loading of 2 t ha^?1), surface tension draws up water from between the litter particles. This reduces flow depth there, and as a consequence of the lower flow intensity, frictional drag rises. Furthermore, no clear passage remains for the establishment of flow threads. These findings apply to shallow interrill flows in which litter is largely immobile. The key new result from these experiments is that under these conditions, a 20 per cent cover of organic litter can generate interrill frictional retardation that exceeds by nearly 41 per cent that of a bare soil surface, and twice that contributed by the same cover fraction of surface stones. Even greater dominance by litter can be anticipated at the many dryland sites where litter covers exceed those tested here. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

Multiscale Roughness Analysis of Particles: Application to the Classification of Detrital Sediments     

Hervé Drolon  Bernard Hoyez  Fabrice Druaux  Alain Faure 《Mathematical Geology》2003,35(7):805-817

  相似文献