Internal generation of waves: Delta source function method and source term addition method     

Gunwoo Kim  Changhoon Lee  Kyung-Duck Suh   《Ocean Engineering》2007,34(17-18):2251-2264

In this study, we investigate two internal wave generation methods in numerical modeling of time-dependent equations for water wave propagation, i.e., delta source function method and source term addition method, the latter of which has been called the line source method in literatures. We derive delta source functions for the Boussinesq-type equations and extended mild-slope equations. By applying the fractional step splitting method, we show that the delta source function method is equivalent to the source term addition method employing the energy velocity. This suggests that the energy velocity should be used rather than the phase velocity for the transport of incident wave energy in the source term addition method. Finally, the performance of the delta source function method is verified by accurately generating nonlinear cnoidal waves as well as linear waves for horizontally one-dimensional cases.  相似文献   

A method to estimate the forces exerted by internal solitons on cylindrical piles   总被引：1，自引：0，他引：1  

Shuqun Cai  Xiaomin Long  Zijun Gan 《Ocean Engineering》2003,30(5):673-689

Internal soliton is the large amplitude wave existing in the pycnocline, induced by internal tide in the condition of special bottom topography. During its propagation process, the induced disturbance can bring about strong convergence of sea water and sudden strong current (wave-induced-current), which can cause severe threat to the ocean engineering structures, such as oil drilling platform and pipeline. In this paper, Morison’s empirical method, modal separation and regression analyses are introduced to estimate the forces and torques exerted by internal soliton on cylindrical piles. As an example, a limited set of observational data recording a passage of the internal soliton near Dongsha Islands is used to estimate the horizontal velocity and its acceleration in a vertical section for computing the force and torque on a supposed pile, and the estimation results are reasonable. It is shown that, the higher number of the modes retained in the calculation, the better the estimation of velocity profile fits the observational one. A better overall approximation to the real solution can be reached if there are more observational current data acquired in a whole vertical profile.  相似文献   

Scattering of Semidiurnal Internal Kelvin Wave at Step Bottom Topography     

Yuji?KawamuraEmail author  Yujiro?Kitade  Masaji?Matsuyama 《Journal of Oceanography》2005,61(1):59-68

A three-dimensional, multi-level model was used to study the energy dissipation of semidiurnal internal Kelvin waves due to their interaction with bottom topography. A simplified topography consisting of a channel with an additional shallow bay was used to clarify the wave’s scattering process. When the first mode semidiurnal internal wave given at an open boundary arrives at the bay mouth, higher-mode internal waves are generated at a step bottom of the bay mouth. As a result, the energy of the first mode internal Kelvin wave is effectively decayed. The decay rate of the internal Kelvin wave depends on both the width and length of the additional bay. The maximum decay rate was found when a resonance condition occurs the bay, that is, the bay length is equal to a quarter of wave length of the first mode internal wave on the shallow region. The decay rate in the wide bay cases is higher than that in a narrow case, due to a contribution from the scattering due to the Poincare wave that emanates from the corners of the bay head. The decay rate with the additional bay is 1.1–1.8 times that of the case without the additional bay. The decay rate due to the scattering process is found to be of the same order as that of the internal and bottom friction.  相似文献   

The impact of the M₂ internal tide on data-assimilative model estimates of the surface tide     

E.D. Zaron  G.D. Egbert   《Ocean Modelling》2007,18(3-4):210-216

We use a synthetic data experiment to assess the accuracy of ocean tides estimated from satellite altimetry data, with emphasis on the impact of the phase-locked internal tide, which has a surface expression of several centimeters near its sites of genesis. Previous tidal estimates have regarded this signal as a random measurement error; however, it is deterministic and not scale-separated from the barotropic (surface) tide around complex bathymetric features. The synthetic data experiments show that the internal tide has a negligible impact on the barotropic tidal fields inferred under these circumstances, and the barotropic dissipation (a quadratic functional of the tidal fields) is in good agreement with the energetics of the three-dimensional regional primitive equations model which is the source of the synthetic data.  相似文献   

Effects of scattering and resonance on energy dissipation of an internal tide in a narrow shelf     

Yuji Kawamura  Yujiro Kitade 《Journal of Oceanography》2007,63(1):15-25

The effects of scattering and resonance on the energy dissipation of an internal tide were investigated using a two-dimensional model which is a reassembled version of the theoretical generation model devised by Rattray et al. (1969) for internal tide. The basic character of the scattering process at the step bottom was first investigated with a wide shelf model. When the internal wave incited from a deep region (Region II) into the shallow shelf region (Region I), a passing wave into the shallow region, a reflected wave into the deep region, and a beam-like wave, i.e. a scattered wave (SW), emanated at the step bottom. The SW, which consists of the superposition of numerous internal modes, propagated upward/downward into both regions. The general properties of the SW were well expressed around the shelf edge, even in the present model with viscosity effect. The amplitude of the SW decreased dramatically when the depth of the velocity maximum of the incident internal wave in Region II corresponded with the depth of the shelf edge. In the narrow shelf model, where the decay distance of the internal wave in Region I is longer than the shelf width, the incident internal wave reflected at the coast to form a standing wave. When the internal wave in Region I is enhanced by the resonance, the energy of the SW in Region II is also intensified. Furthermore, the energy of the modes in Region II predominated when the velocity maximum is identical to that of the dominant mode in Region I. These results suggest that the spatial scale of shelf region is a very important factor governing the energy dissipation of the internal tide through reflection and scattering in a narrow shelf.  相似文献   

Molecular identification of ascaridoid nematodes from the deep-sea onion-eye grenadier (Macrourus berglax) from the East Greenland Sea   总被引：2，自引：0，他引：2  

Esra Kellermanns  Sven Klimpel  Harry Wilhelm Palm 《Deep Sea Research Part I: Oceanographic Research Papers》2007,54(12):2194-2202

Macrourus berglax from the East Greenland Sea was studied for the presence of ascaridoid nematodes in 2001, 2002 and 2003. The fishes were collected between 278 and 413 m water depth using a benthopelagic net. Based on the amplification of the internal transcribed spacer ITS-1, 5.8S, ITS-2 and flanking sequences (=ITS+), three ascaridoid nematode species were identified. The prevalence of infestation during the 3 years ranged from 42.9% to 62.9% and 22.9% to 40.0% for the anisakids Anisakis simplex (s.s.) and Pseudoterranova decipiens (s.s.), respectively, and from 28.6% to 60.0% for the raphidascarid Hysterothylacium aduncum. A total of 18 specimens, two of each species and examination year, revealed no sibling species, suggesting a limited distribution of other ascaridoid siblings into the deep sea. The ITS-1, 5.8S and ITS-2 sequences of A. simplex (s.s.) from the East Greenland Sea did not differ from previously published sequence data (GenBank) from other regions in the Atlantic and Pacific oceans. The sequences of P. decipiens (s.s.) corresponded most closely to those of specimens from Richardson Bay, western Pacific, and differed in four positions (0.5%). They corresponded least to those of specimens from Japan (1.5%). The sequence data for H. aduncum differed in two positions in the ITS-1 (0.2%) and three positions in the ITS-2 (0.3%) from sequences from Japan. A high genetic similarity between the regions can be explained by (a) extensive final host migration in the case of A. simplex (s.s.), (b) an overlapping distribution of final host populations along the continental shelves for P. decipiens (s.s.) and (c) a low host specificity and large population size in the intermediate and final hosts for H. aduncum. The occurrence of the identified species in the macrourid fish underlines the potential of cosmopolitan ascaridoid nematodes to distribute not only horizontally but also vertically in the deep sea.  相似文献   

Neoproterozoic trace fossils vs. microbial mat structures: Examples from the Tandilia Belt of Argentina     

H. Porada  E. Bouougri 《Gondwana Research》2008,13(4):480-487

The Tandilia Belt in northeast Argentina includes a Neoproterozoic sequence of sediments (Sierras Bayas Group), in which the Cerro Largo Formation, ca. 750 Ma in age, forms a siliciclastic, shallowing upward succession of subtidal nearshore to tidal flat deposits. Trace fossils Palaeophycus isp. and Didymaulichnus isp. have been described from the upper part of this succession. Specific sedimentary structures consisting of round-crested bulges, arranged in a reticulate pattern, and networks of curved cracks are associated with the trace fossils. These structures are considered to be related to epibenthic microbial mats that once colonized the sediment surface. They reflect stages of mat growth and mat destruction, if compared to analogous structures in modern cyanobacterial mats of peritidal, siliciclastic depositional systems. Also the trace fossils are interpreted as mat-related structures, partly forming components of networks of shrinkage cracks, partly representing the upturned and involute margins of shrinkage cracks or circular openings in desiccating and shrinking, thin microbial mats.

The definition of Didymaulichnus miettensis Young as a Terminal Proterozoic trace fossil is questioned, and it may be considered to interpret the ‘bilobate’ structure as the upturned, opposite margins of microbial shrinkage cracks which have been brought back into contact by compaction after burial.  相似文献   

Estimation of hydraulic permeability considering the micro morphology of rocks of the borehole YAXCOPOIL-1 (Impact crater Chicxulub,Mexico)     

S. I. Mayr  H. Burkhardt  Yu. Popov  A. Wittmann 《International Journal of Earth Sciences》2008,97(2):385-399

Internal surface, formation factor, Nuclear Magnetic Resonance (NMR)-T2 relaxation times and pore radius distributions were measured on representative core samples for the estimation of hydraulic permeability. Permeability is estimated using various versions of the classic Kozeny–Carman-equation (K–C) and a further development of K–C, the fractal PaRiS-model, taking into account the internal surface. In addition to grain and pore size distribution, directly connected to permeability, internal surface reflects the internal structure (“micro morphology”). Lithologies could be grouped with respect to differences in internal surface. Most melt rich impact breccia lithologies exhibit large internal surfaces, while Tertiary post-impact sediments and Cretaceous lithologies in displaced megablocks display smaller internal surfaces. Investigations with scanning electron microscopy confirm the correlation between internal surface and micro morphology. In addition to different versions of K–C, estimations by means of NMR, pore radius distributions and some gas permeability measurements serve for cross-checking and calibration. In general, the different estimations from the independent methods and the measurements are in satisfactory accordance. For Tertiary limestones and Suevites bulk with very high porosities (up to 35%) permeabilites between 10⁻¹⁴ and 10⁻¹⁶ m² are found, whereas in lower Suevite, Cretaceous anhydrites and dolomites, bulk permeabilites are between 10⁻¹⁵ and 10⁻²³ m².  相似文献   

Scattering of elastic waves by a fracture zone containing randomly distributed cracks     

Jun Kawahara  Teruo Yamashita 《Pure and Applied Geophysics》1992,139(1):121-144

We theoretically study the scattering ofP, SV andSH waves by a zonal distribution of cracks, which simulates a fault fracture zone. An investigation is conducted how the geometrical properties of the crack distribution and the frictional characteristics of the crack surface are reflected in the attenuation and dispersion of incident waves, as well as in the amplitudes of the transmitted and reflected waves from the zone. If the crack distribution within the fault zone changes temporally during the preparation process of the expected earthquake, it will be important for earthquake prediction to monitor it, utilizing the scattering-induced wave phenomena.We consider the two-dimensional problem. Aligned cracks with the same length are assumed to be randomly distributed in a zone with a finite width, on which elastic waves are assumed to be incident. The distribution of cracks is assumed to be homogeneous and sparse. The crack surface is assumed to be stress-free, or to undergo viscous friction; the latter case simulates fluid-filled cracks. The opening displacement of the crack is assumed to be negligibly small. The idea of the mean wave formalism is employed in the analysis, and Foldy's approximation is assumed.When the crack surface is stress-free, it is commonly observed for every wave mode (P, SV andSH) that the attenuation coefficientQ ^–1 peaks aroundka1, the phase velocity is almost independent ofk in the rangeka<1 and it increases monotonically withk in the rangeka>1, wherek is the intrinsicS wavenumber anda is the half length of the crack. The effect of the friction is to shift the peak ofQ ^–1 and the corner of the phase velocity curve to the low wavenumber range. The high wavenumber asymptote ofQ ^–1 is proportional tok ^–1 independently of model parameters and the wave modes. If the seismological observation thatQ ^–1 ofS waves has a peak at around 0.5 Hz in the earth's crust is combined with our results, the upper limit of crack size within the crust is estimated about 4 km. The information regarding the transmitted and reflected waves, such as the high wavenumber limit of the amplitude of the transmitted wave etc., allows estimation of the strength of the friction.  相似文献   

西南某电站右岸倾坡内夹泥裂隙成因探讨   总被引：1，自引：0，他引：1  

文志兵  王士天  王运生 《地质灾害与环境保护》2002,13(1):73-76

西南某拟建大型水电站的右岸岩体中存在倾向坡内的夹泥裂隙，通过对其的发育情况以及所处的地质环境进行系统的研究和认真剖析，认为该区内的倾坡内夹泥裂隙的成因并非正常卸荷引起，而是在构造的基础上，穹隆挽近期隆起的结果，为右岸坝肩稳定性评价提供了可靠的依据。  相似文献