Simulation of adaptive optics for the Vacuum Tower Telescope     

Anita Enmark  Thomas Berkefeld  Oskar von der Lühe  Torben Andersen 《Experimental Astronomy》2006,21(2):87-99

A simulation model of the adaptive optics of the German Vacuum Tower Telescope (VTT), Observatorio del Teide, Tenerife, is presented. The model uses modules from the integrated model of the Euro50 extremely large telescope, and includes submodels of a Shack-Hartmann wavefront sensor, a de-formable mirror, a tip-tilt mirror, high-voltage amplifier low-pass filters, a reconstructor and a controller. We investigate the impact on the closed loop bandwidth of changes in controller configuration and certain system parameters, such as low pass filter bandwidth and camera integration and readout time. Control strategies were tested on simple models before implementation on the full VTT model. Using the models, different control strategies are compared.  相似文献   

Obtaining basic simulation data for a heterogeneous field with stratified marine soils     

P. A. Finke  W. J. P. Bosma 《水文研究》1993,7(1):63-75

Thinly stratified sedimentary deposits in a heterogeneous field were investigated to obtain basic physical data for the simulation of water flow. A procedure is described which translates a thinly stratified soil profile into a number of functional layers using functional hydrological properties. A functional layer is defined as a combination of one or more soil horizons and should (i) be recognizable during a soil survey using an auger and (ii) show significantly different functional hydrological properties when compared with another functional layer. This procedure gave three easily recognizable functional layers. Sets of hydrological characteristics of these three functional layers were obtained by physical measurements of the soil and by estimation, using textural data for classification into a standard Dutch series. The performance of several combinations of these sets was tested by comparing simulated and measured soil matric potentials for seven plots during one year. The best simulation results were obtained if measured soil hydraulic characteristics were used for relatively homogeneous functional layers and if the soil hydraulic characteristics were estimated at each location for the most heterogeneous layer.  相似文献   

Nonlinear dynamic finite element simulation of Alibey earth dam     

Bilge Siyahi  Haydar Arslan 《Environmental Geology》2008,55(1):77-85

In this study, dynamic behavior and earthquake resistance of Alibey earth dam was investigated. The dam was modeled with four node plane-strain finite elements (FE) and displacement-pore pressure coupled FE analyses were performed. Nonlinear material models such as pressure dependent and independent multi yield materials were implemented during the analyses. Transient dynamic FE analyses were performed with Newmark method. The Newton-Raphson solution scheme was adopted to solve the equations. Liquefaction and/or cyclic mobility effects were considered during the analysis. For the FE analyses, OpenSees (Open System for Earthquake Engineering Simulation) framework was adopted.  相似文献   

Simulating a heavy metal spill under estuarine conditions: Effects on the clam Scrobicularia plana     

E. García-Luque  T. A. DelValls  C. Casado-Martínez  J. M. Forja  A. Gmez-Parra 《Marine environmental research》2004,58(2-5):671

We describe the effect of heavy metals Zn, Cd, Pb and Cu on the induction of methallothioneins on the clam Scrobicularia plana along a salinity gradient simulated under laboratory conditions. The clams were exposed to constant heavy metal concentrations in a dynamic estuary simulator during a 15-day assay to investigate possible induction of metal-binding proteins in them. The concentration of heavy metals in water was analysed. Clams were analysed for methallothionein concentrations. The speciation of Zn, Cd, Pb and Cu along the salinity gradient was modelled. Zn showed the highest concentrations and its prevalent species was the free ion. Intersite differences have been observed in methallothionein concentration and related to the salinity gradient. It seems that synthesis of methallothioneins is the result of physiological forces acting in concert with the changes in the chemical speciation of metals, owing to the trace metals uptake is controlled by means of an interaction of physiology and physicochemistry.  相似文献   

Parameter identification of a compliant nonlinear SDOF system in random ocean waves by reverse MISO method     

R. Panneer Selvam  S. K. Bhattacharyya   《Ocean Engineering》2001,28(9):33

The determination of the drag and inertia coefficients, which enter into the wave force model given by Morison's equation, is particularly uncertain and difficult when a linear spectral model is used for ocean waves, and the structure is compliant and has nonlinear dynamic response. In this paper, a nonlinear System Identification method, called Reverse Multiple Inputs–Single Output (R–MISO) is applied to identify the hydrodynamic coefficients as well as the nonlinear stiffness parameter for a compliant single-degree-of-freedom system. Four different types of problems have been identified for use in various situations and the R–MISO has been applied to all of them. One of the problems requires iterative solution strategy to identify the parameters. The method has been found to be efficient in predicting the parameters with reasonable accuracy and has the potential for use in the laboratory experiments on compliant nonlinear offshore systems.  相似文献   

Path following control system for a tanker ship model     

Lúcia Moreira  Thor I. Fossen  C. Guedes Soares   《Ocean Engineering》2007,34(14-15):2074-2085

A two-dimensional path following control system for autonomous marine surface vessels is presented. The guidance system is obtained through a way-point guidance scheme based on line-of-sight projection algorithm and the speed controller is achieved through state feedback linearization. A new approach concerning the calculation of a dynamic line-of-sight vector norm is presented which main idea is to improve the speed of the convergence of the vehicle to the desired path. The results obtained are compared with the traditional line-of-sight scheme. It is intended that the complete system will be tested and implemented in a model of the “Esso Osaka” tanker. The results of simulations are presented here showing the effectiveness of the system aiming in to be robust enough to perform tests either in tanks or lakes.  相似文献   

新生相形成的模拟实验研究     

雍国平  陈邦林 《海洋科学》1996,20(2):37-39

通过模拟实验制备了硅酸盐类不溶性固体，从Ｘ射线衍射特征和红外光谱特征两方面看，制得的硅酸盐类与河口新生相成分，结构相似，表明铁水解成的β－ＦｅＯＯＨ胶体吸附Ｓｉ，Ａｌ，Ｍｇ，Ｋ等元素，经结构重组可形成硅酸盐矿物，这可能是河口体系新生相的形成原因。  相似文献   

Comparison of numerical models of two debris flows in the Cortina d’ Ampezzo area,Dolomites, Italy   总被引：2，自引：0，他引：2  

Maria Concetta Armento  Rinaldo Genevois  Pia Rosella Tecca 《Landslides》2008,5(1):143-150

The accurate prediction of runout distances, velocities and the knowledge of flow rheology can reduce the casualties and property damage produced by debris flows, providing a means to delineate hazard areas, to estimate hazard intensities for input into risk studies and to provide parameters for the design of protective measures. The application of most of models that describe the propagation and deposition of debris flow requires detailed topography, rheological and hydrological data that are not always available for the debris-flow hazard delineation and estimation. In the Cortina d’Ampezzo area, Eastern Dolomites, Italy, most of the slope instabilities are represented by debris flows; 325 debris-flow prone watersheds have been mapped in the geomorphological hazard map of this area. We compared the results of simulations of two well-documented debris flows in the Cortina d’Ampezzo area, carried on with two different single-phase, non-Newtonian models, the one-dimensional DAN-W and the two-dimensional FLO-2D, to test the possibility to simulate the dynamic behaviour of a debris flow with a model using a limited range of input parameters. FLO-2D model creates a more accurate representation of the hazard area in terms of flooded area, but the results in terms of runout distances and deposits thickness are similar to DAN-W results. Using DAN-W, the most appropriate rheology to describe the debris-flow behaviour is the Voellmy model. When detailed topographical, rheological and hydrological data are not available, DAN-W, which requires less detailed data, is a valuable tool to predict debris-flow hazard. Parameters obtained through back-analysis with both models can be applied to predict hazard in other areas characterized by similar geology, morphology and climate.  相似文献   

Study of geothermal water intrusion due to groundwater exploitation in the Puebla Valley aquifer system, Mexico   总被引：1，自引：1，他引：1  

E. Leticia Flores-Márquez  Gabriel Jiménez-Suárez  Raymundo G. Martínez-Serrano  René E. Chávez  Daniel Silva Pérez 《Hydrogeology Journal》2006,14(7):1216-1230

Significant intrusion of geothermal water into fresh groundwater takes place in the Puebla Valley aquifer system, Mexico. The decline in the potentiometric surface due to the overexploitation of the groundwater induces this intrusion. This hydrological system comprises three aquifers located in Plio-Quaternary volcanic sediments and Mesozoic calcareous rocks. The hydraulic balance of the aquifer shows that the annual output exceeds the natural inputs by 12 million m³. Between 1973 and 2002, a drop in the potentiometric surface, with an 80 m cone of depression, was identified in a 5-km-wide area located southwest of the city of Puebla. Chemical analyses performed on water samples since 1990 have shown an increase in total dissolved solids (TDS) of more than 500 mg/L, coinciding with the region showing a cone of depression in the potentiometric surface. A three-dimensional flow and transport model, based on the hydrogeological and geophysical studies, was computed by using the MODFLOW and MT3D software. This model reproduces the evolution of the aquifer system during the last 30 years and predicts for 2010 an additional drawdown in the potentiometric surface of 15 m, and an increase in the geothermal water intrusion.  相似文献   

Damage risk assessment of breakwaters under tsunami attack     

Ayşen Ergin  Can Elmar Balas 《Natural Hazards》2006,39(2):231-243

Turkey was struck by two major events on 17 August and 12 November 1999, named Izmit (M _w = 7.4) and Düzce (M _w = 7.2) earthquakes, respectively. Rubble mound breakwaters in Izmit Bay experienced little damage, as forecasted by the new risk assessment model in which tsunami occurrence risk was included in the damage estimations. In order to determine the occurrence probability of structural damage under design conditions, including the environmental loading parameters of tsunami and storm waves, tidal range and storm surge, the Conditional Expections Monte Carlo simulation was applied in the risk assessment model developed in this study for the Esenköy Fishery Harbour, Turkey. A tsunami was not the key design parameter when compared to storm waves for the main breakwater of the harbour, however, in places with great seismic activity, the tsunami risk should be important depending on the occurrence probability and magnitude of the tsunami.  相似文献