排序方式： 共有14条查询结果，搜索用时 132 毫秒
1.
疏松砂岩稠油油藏出砂冷采机理及配套技术研究 总被引：3，自引：0，他引：3
稠油出砂冷采技术对地层原油含有溶解气的各类疏松砂岩稠油油藏具有较广泛的适应性，它通过大量砂子的产出和泡沫油的形成，获得较高的原油产量，河南油田于1996年在国内率先开展稠油出砂冷采技术调研及可行性研究，出砂冷采机理及配套工艺技术研究，并于1997年6月进入现场先导试验，矿场试验已展示出明显出砂冷采特征的G4906井，日产油量20t-30t，是常规开采和蒸汽吞吐的10倍和4倍以上，开采成本比蒸汽吞吐降低47%，出砂冷采工业化应用配套技术的形成和应用，将使国内及河南油田稠油资源利用程度进一步提高。 相似文献
2.
Transmissivity (T) is one of the most important parameters in groundwater studies, and is generally estimated from pumping tests. T can also be deduced from abundantly available specific-capacity (Q/s) data by using analytical and/or empirical approaches, further upscaled by geostatistical methods. A different, remote sensing based, hydrogeomorphological approach is proposed, to upscale T from point- or well-scale to aquifer-scale, and it is applied to the piedmont alluvial aquifer system of Doon Valley in India. In the first step, Q/s and T data-pairs available from aquifer tests were used to establish an empirical, logarithmic relation. Subsequently, satellite imagery along with available data from published and unpublished maps, literature sources and ground surveys were used to divide the aquifer system into major hydrogeomorphological domains that control the groundwater occurrence and flow. Then, the T data derived from Q/s (using the empirical relation) and that available from pumping tests at well-scale were upscaled to aquifer-scale by averaging the T values within each hydrogeomorphological domain. Such a stratification approach is especially useful in areas where availability of only a few data-pairs of known Q/s and T limit the use of geostatistical techniques. A comparative study of the published empirical relations between Q/s and T in various hydrogeologic settings revealed that the relation obtained for Doon Valley aquifer system is close to that found for a similar alluvial aquifer system in Morocco. 相似文献
3.
黄淮地区巨厚松散层岩性结构特征以及采矿对其水动态的影响 总被引：2，自引：0，他引：2
本文选择地处黄淮地区的淮南、淮北、大屯、兖州和邢台等矿区中典型矿井的巨厚松散层,分析了该地区巨厚松散层的岩性结构特征,从水体、地层和采矿波及类型等方面论述了采矿对松散层地下水动态的影响特征,解释和解决了某些实际工程问题。 相似文献
4.
Elastic properties of an unconsolidated sand are largely dependent on the elastic properties of its constituent grain and the micro-structure that defines how the grains are arranged within themselves. Coordination number, that is the average number of contacts a grain has with its neighbours, and contact surface area are the two parameters closely related to the microstructure. Moreover, grain shapes and sorting also have substantial influence on these parameters. To calculate these parameters and find any potential relationships with the shape factors, we acquire high-resolution micro computed tomography images of four mechanically compacted unconsolidated dry sand samples that are of different shape factors and sorting indices. After a comprehensive voxel-based data processing, we calculate shape factors such as sphericity and roundness of each grain in all samples. Using own algorithm, we then calculate the coordination number and contact surface area. Results show that samples of well-sorted and higher spherical and rounded grains have higher coordination number and contact surface area than the samples of poorly sorted and lower spherical and rounded grains. Among the poorly sorted samples, coordination number is largely dependent on the fraction of larger grain sizes present in the sample. Inside any given sample, grains of lower sphericity tend to have higher coordination numbers. Moreover, more spherical and rounded grains have greater contact surface area with their neighbours. 相似文献
5.
R. I. Acworth 《Hydrogeology Journal》2007,15(7):1279-1289
The vertical hydraulic gradient in an unconfined sand aquifer frequently exceeds the horizontal gradient when measured close to a surface discharge boundary, around an abstraction bore or close to a saline interface. The vertical gradient can be efficiently investigated using a multi-channel manometer board connected to a bundled piezometer installed using hollow-stem-auger-drilling techniques. The design and construction of a manometer board is described. Manometer board data from a site in a 30-m-deep fresh-water aquifer adjacent to a pumping bore are described. The bore is screened in the lower part of the aquifer and the impacts of partial penetration are evident on the manometer board results. Data are then described from the centre of a coastal sand spit where fresh water overlies saline water. Fluid electrical conductivity measurements from the individual tubes of the bundled piezometer are used to derive fluid density at each of the bundled piezometer ports. The average fluid density of water above the mini-piezometer port at each depth is then calculated using Gaussian quadrature. The environmental-water head profiles are compared to point-water and fresh-water head profiles and the implications of the incorrect use of point-water or fresh-water head vertical profiles are clearly demonstrated. 相似文献
6.
Saleh K. Al Mansoori Stefan IglauerChristopher H. Pentland Martin J. Blunt 《Advances in water resources》2009
We measure the trapped saturations of oil and gas as a function of initial saturation in water-wet sand packs. We start with a water-saturated column and inject octane (oil), while water and oil are produced from the bottom. Once water production has ceased, air (gas) then enters from the top, allowing oil and gas to drain under gravity for different times. Finally water is then injected from the bottom to trap both oil and gas. The columns are sliced and the fluids analyzed using gas chromatography. We find that for high initial gas saturations more gas can be trapped in the presence of oil than in a two-phase (gas/water) system. The residual gas saturation can be over 20% compared to 14% in two-phase flow [Al Mansoori SK, Iglauer S, Pentland CH, Bijeljic B, Blunt MJ. Measurements of non-wetting phase trapping applied to carbon dioxide storage. Energy Procedia 2009;1(1):3173–80]. This is unlike previous measurements on consolidated media, where the trapped gas saturation is either similar or lower to that reached in an equivalent two-phase experiment. For lower initial gas saturation, the amount of trapping follows the initial-residual trend seen in two-phase experiments. The amount of oil trapped is insensitive to initial gas saturation or the amount of gas that is trapped, again in contrast to measurements on consolidated media. More oil is trapped than would be predicted from an equivalent two-phase (oil/water) system, although the trapped saturation is never larger than the maximum reached in two-phase flow (around 11%) [Pentland CH, Al Mansoori SK, Iglauer S, Bijeljic B, Blunt MJ. Measurement of non-wetting phase trapping in sand packs. In: SPE 115697, proceedings of the SPE annual technical conference and exhibition, Denver, Colorado, USA; 21–24 September 2008]. These initially surprising results are explained in the context of oil layer stability and the competition between snap-off and piston-like advance. In two-phase systems, displacement is principally by cooperative piston-like advance with relatively little trapping, whereas in consolidated media snap-off is generally more significant. However, oil layer collapse events during three-phase waterflooding rapidly trap the oil which acts as a barrier to direct water/gas displacement, except by snap-off, leading to enhanced gas trapping. 相似文献
7.
孔隙度在岩石物理和地震勘探领域都是一个非常重要的参数,水饱和地层的孔隙度可以用于求海底地层的弹性模量进而求取纵横波速度、识别水合物以及估计水合物的储量等.然而在没有打钻的情况下要相对准确地了解海底未固结成岩地层的孔隙度变化趋势是困难的.历史上有学者提出了几个模型,都是基于孔隙度随深度的增加呈现指数下降的趋势,并且需要知道指数模型中的若干参数,因此就产生了两个问题,一是孔隙度是否随深度增加而呈现指数下降,二是指数模型中参数如何选取.本文从另外一个角度,即利用海底介质的压实性从表层开始往下逐层求取水饱和地层的孔隙度,此方法被称之为"体积模量法",它仅需要知道表层孔隙度和地层矿物组分,从而节省了勘探成本.本文将该方法应用于我国南海地区和美国ODP井数据,结果与测井数据以及地震反演数据吻合得较好. 相似文献
8.
含水合物松散沉积物的声学特性对海上天然气水合物地球物理勘探和资源评价具有重要意义.研制了适用于高压条件下含水合物沉积物声学特性探测的纵横波一体化新型弯曲元换能器,提出利用频谱分析(FFT)和小波分析(WT)相结合的方法获取纵横波速度,并进行了多个轮次的水合物声学特性模拟实验研究.结果表明,新型弯曲元技术可以灵敏探测松散沉积物中水合物的生成和分解,随着水合物饱和度(Sh)的增大,纵横波速度呈规律性增长:当Sh<25%时,纵横波速度增长较快,水合物可能胶结沉积物颗粒生成;25%~60%之间,声速增长较为缓慢,水合物可能与沉积物颗粒呈接触关系;在Sh>60%时声速随着水合物饱和度增加又快速增长,表明水合物可能重新胶结沉积物颗粒生成. 相似文献
9.
10.
Deformation mechanisms and hydraulic properties of fault zones in unconsolidated sediments; the Roer Valley Rift System,The Netherlands 总被引：1，自引：0，他引：1
In general, faults cutting through the unconsolidated sediments of the Roer Valley Rift System (RVRS), The Netherlands, form
strong barriers to horizontal groundwater flow. The relationships between deformation mechanisms along fault zones and their
impact on the hydrogeological structure of the fault zone are analyzed in a shallow (0–5 m below land surface) trench over
one of the faults in the study area. Recently developed digital-image-analysis techniques are used to estimate the spatial
distribution of hydraulic conductivity at the millimeter-scale and to describe the micromorphologic characteristics of the
fault zone. In addition, laboratory measurements of hydraulic conductivity on core-plug samples show the larger-scale distribution
of hydraulic conductivity in the damage zone flanking the main fault plane. Particulate flow is the deformation mechanism
at shallow depths, which causes the damage zone around the fault, in the sand-rich parts, to have a relatively enhanced hydraulic
conductivity. The fault core is characterized by reduced hydraulic conductivity due to clay smearing, grain-scale mixing,
and iron-oxide precipitation.
Electronic Publication 相似文献