The discovery of two distant, massive clusters of galaxies in the ROSAT All-Sky Survey     

A. C. Edge  H. Ebeling  †  M. Bremer  H. Röttgering  M. P. van Haarlem  R. Rengelink  N. J. D. Courtney 《Monthly notices of the Royal Astronomical Society》2003,339(4):913-924

  相似文献   

岩体三维节点偶对分析及其应用          下载免费PDF全文

王思敬  张菊明 《地质科学》1991,(3):277-287

本文讨论了节点偶对分析的三维扩展。节点偶对分析是针对摩擦滑动节理单元的约束边界进行的序列矢量判定。在三维节理单元的分析中,几何约束和相应的力学判据极为复杂,采用节点偶对等效结合力方法才能迎刃而解。文中对三维转向节理模型的分析得到合理的结果,它表明本文所提出的方法可成功地应用于节理岩体的有限元分析。  相似文献   

鲁西北西向断裂系晚中生代活动的几何学、运动学及年代学研究     

王先美 《地质学报》2008,82(1):1258-1273

鲁西隆起区发育有大量的北西向脆性断裂。依据野外断裂构造的几何学、运动学详细解析认为,北西向断裂系经历了早期的右行压剪、右行张剪,以及后期的左行压剪等不同性质的构造活动。由与北西向断裂活动相伴生的同期侵入岩体的 K-Ar测试结果分析,北西向断裂系在距今约160 Ma及距今130~110 Ma分别经历了右行压剪与右行张剪构造活动;通过分布在隆起区不同样品的磷灰石裂变径迹数据分析、冷却史反演,厘定鲁西地体在距今90~80 Ma存在一次区域性快速冷却构造事件,该构造事件与北西向断裂系的左行压剪构造活动相对应。  相似文献   

Experimental solidification of anhydrous latitic and trachytic melts at different cooling rates: The role of nucleation kinetics   总被引：1，自引：0，他引：1  

Gianluca Iezzi  Silvio Mollo  Guido Ventura  Andrea Cavallo  Claudia Romano 《Chemical Geology》2008,253(3-4):91-101

Two sets of cooling experiments were run at atmospheric conditions for two anhydrous starting latitic and trachytic melts: 1) five cooling rates (25, 12.5, 3, 0.5, and 0.125 °C/min) between 1300° and 800 °C, and 2) a 0.5 °C/min cooling rate from 1300 °C with quench temperatures at 1200°, 1100°, 1000° and 900 °C. Trachytic run-products are invariably glassy. Nucleation is also suppressed in the latitic run-products at the three highest cooling rates. Conversely, in the 0.5 and 0.125 °C/min runs, latites have a crystal content of  90 vol.%. The phases are: plagioclase, clinopyroxene, glass and iron-bearing oxide (in order of abundance). The variable quench temperatures, investigated by coupling experiments with Pt wire and Pt capsule sample containers in set 2, again did not produce crystallization of trachyte, whereas latitic samples are characterized by  10 vol.% of oxides, pyroxenes and plagioclase (in order of appearance), at temperature < 1000 °C. Effects of (preferential) heterogeneous nucleation on sample holders, of superheating degree, and chemical species loss during cooling are absent for both melt compositions. The difference of solidification paths between these two silicate melts can be ascribed only to their small chemical differences. In comparison with calculated equilibrium conditions all the experimental latitic and trachytic run-products revealed strong kinetic effects, interpretable in the light of the nucleation theory. The glass-forming ability (GFA) of trachyte is higher, whereas their critical cooling rate (Rc) is lower (< 0.125 °C/min), in comparison to latitic melts (Rc > 0.5 °C/min). The experimental results carried out in this study can be applied to lava flows and domes; trachytic lavas are able to flow for longer period with respect to latitic ones in a metastable condition. Glass-rich terrestrial lavas, i.e. obsidians, can be the result of sluggish nucleation kinetics due to the relative high polymerisation of evolved silicate melts.  相似文献   

Design and Strength Analysis of A Spherical Connector for Lifting Subsystem in Deep Sea Mining System     

冯雅丽张文明  冯福璋 《中国海洋工程》2006,20(4):605-613

1 .IntroductionThe lifting systemis composed of pipes andtheir connectors .It is not onlythe lifting channel formanganese nodule betweenthe miningship andintermediate bin,but alsothe supporting massfor deepsea miningequipment and cables .Sothe reliability…  相似文献   

Elasto-Plastic Analysis of Tubular Joints of Offshore Platforms by Finite Element Method     

Chen Tieyun Zhu Zhenghong Professor  Dept. of Naval Architecture  Ocean Engineering  Shanghai Jiao Tong University  Shanghai Lecturer 《中国海洋工程》1991,(1)

The plastic node method is reformulated by the variational principle and is applied to elasto-plastic finite element analysis of tubular joints, eventually including the effect of internal and external gussets, stiffener rings, etc., if necessary. Four different joints are studied here in detail for the elasto-plastic behavior, the strain at the hot spot, the strain concentration factor around the intersection line, and the propagation of the plastic region with loading up to collapse in order to determine the ultimate strength, safety factor, and development of the plastic field. The present results are in good agreement with the experimental results.  相似文献   

海水冷却技术   总被引：10，自引：1，他引：10  

侯纯扬 《海洋技术学报》2002,21(4):33-40

城市用水中约 5 0 %是工业冷却水。海水代替淡水作为工业冷却用水——海水冷却 ,是解决我国沿海城市和地区淡水资源危机问题的重要途径之一。海水冷却技术包括海水直流冷却技术和海水循环冷却技术 ,目前我国基本具备了具有自主知识产权的海水(直流、循环 )冷却关键技术。寻求政府在资金、政策等方面的大力支持 ,加强有关行业、院所、企业的“强强联合”,适时借鉴国外先进的海水冷却塔技术 ,加快产业化技术示范 ,是推进海水循环冷却技术快速发展的必由之路  相似文献   

黄骅电厂取水河段取水特性的数模与物模研究     

童中山  应新亚  钱炳法 《海洋工程》1997,(4)

本文采用数值模拟与物模试验相结合的研究方法，详细地研究了黄骅电厂一、二、三期工程的取水特性。结果表明，现有河道只能满足电厂一期工程的取水需求；若将现有河道进行适当开挖，可以满足电厂三期取水需要。  相似文献   

盐碱水NaCl浓度和碱度对银鲫(Carassius auratus gibelio)幼鱼毒性的初步研究   总被引：2，自引：0，他引：2  

郑伟刚  张兆琪  张美昭  董双林 《中国海洋大学学报(自然科学版)》2001,31(4):513-517

通过对银鲫(Carassiusauratusgibelio)幼鱼(L=3.56±0.28cm)的NaCl浓度(pH=8.80±0.10)及碱度(pH=8.84±0.26)的急性毒性试验，用概率单位法求得其24，48，96h的半致死浓度(LC50值)NaCl浓度分别为11.53、10.77、8.58g/L；碱度分别为98.74、79.49、64.19mmol/L。在此基础上采用水生毒理联合效应相加指数法进行了氯化钠与碳酸氢钠浓度的联合毒性实验(浓度=11)，结果在96h内二者的关系全部为协同作用,且其协同性逐渐减弱并趋向于相加作用。  相似文献   

非常规管节点疲劳寿命分析与计算   总被引：6，自引：1，他引：6  

谭开忍肖熙  黄小平 《海洋工程》2005,23(3):51-54,59

对非常规管节点的疲劳寿命进行了分析研究，用SESAM计算疲劳载荷，应用精细有限元分析计算热点应力，用规范的S—N曲线计算管节点的疲劳寿命。通过实例计算表明，这些处理对非常规管节点疲劳寿命分析与计算是很有效的。  相似文献