Decoupling of stalagmite-derived Asian summer monsoon records from North Atlantic temperature change during marine oxygen isotope stage 5d   总被引：2，自引：0，他引：2  

Houyun Zhou  Jianxin Zhao  Chuan-Chou Shen  Yuexing Feng  Huazheng Guan  Chen-Feng You 《Quaternary Research》2008,70(2):315-321

The Asian monsoon is an important component of the global climate system. Seasonal variations in wind, rainfall, and temperature associated with the Asian monsoon systems affect a vast expanse of tropical and subtropical Asia. Speleothem-derived summer monsoon variation in East Asia was previously found to be closely associated with millennial-scale change in temperature in the North Atlantic region between 75 and 10 ka. New evidence recovered from East Asia, however, suggests that the teleconnection between summer monsoon in East Asia and temperature change in the North Atlantic region may have significantly reduced during 120 to ~ 110 ka, a period directly after the full last interglaciation and corresponding roughly to marine oxygen isotope stage 5d. This reduction may be due to the low ice volume in the North Hemisphere at that time, which makes the millennial-scale change in temperature in the North Atlantic region less effective in influencing the Asian summer monsoon. This is important for investigating the mechanisms controlling the Asian summer monsoon and the paleoclimatic teleconnection between East Asia and the North Atlantic region, and for predicting monsoon-associated precipitation in East Asia under a global-warming trend.  相似文献   

“Cretaceous black flysch” in the Pieniny Klippen Belt, West Carpathians: a case of geological misinterpretation     

Krzysztof Birkenmajer  Przemys&#x;aw Gedl  Ryszard Myczy&#x;ski  Jaros&#x;aw Tyszka 《Cretaceous Research》2008,29(3):535-549

This is a critical assessment of the paper by Oszczypko et al. (2004: Cretaceous Research 25, 89–113), in which they tried to prove a mid-Cretaceous age for the Szlachtowa (“black flysch”) and Opaleniec Formations, in the Pieniny Klippen Belt, West Carpathians, both of which had previously been shown to be of Jurassic age. We argue that the mid-Cretaceous age assignment is a misinterpretation, primarily resulting from their field samples having been collected from some Cretaceous lithostratigraphic units, tectonically associated with the Jurassic formations, and/or from tectonic contact-breccias involving Jurassic and Cretaceous strata. In addition, we suggest that they have overlooked a number of significant palaeontological papers, published since 1962, which record the presence of in situ ammonites, aptychi, belemnites, thin-shelled bivalves (Bositra), gryphaeids, foraminifera, and ostracod assemblages, all indicating a Jurassic (mainly Aalenian), and not a Cretaceous, age for the Szlachtowa Formation, and also the in situ Jurassic (Bajocian) ammonites and thin-shelled bivalves (Bositra), Bositra-microfacies, and age-diagnostic foraminiferal assemblages of the Opaleniec Formation.Our presentation here of recently published dinocyst data from well-preserved assemblages further supports the Jurassic ages for the Szlachtowa (“black flysch”) and Opaleniec Formations.  相似文献   

软硬互层金刚石复合片钻头在地浸砂岩型铀矿中的研究及应用          下载免费PDF全文

要二仓  邢预恩  杨爱军 《探矿工程》2008,35(1):68-70

针对近年在巴音戈壁盆地及鄂尔多斯盆地钻探所遇到的复杂地质情况,研究试验了PDC钻头,在地浸砂岩铀矿钻探生产中取得了良好的效果,并制定总结了相应的钻进参数.  相似文献   

用于砾石夹层钻进的新型PDC钻头的研制与使用          下载免费PDF全文

李天明  李大佛  陈洪俊  雷艳  刘红旗 《探矿工程》2006,33(8):57-60,63

无压浸渍工艺生产的PDC石油钻头钻遇砾石夹层不适应。根据砾石夹层砾石坚硬、软硬互层、非均质、研磨性强的特点，研究了新型PDC钻头，在钻头结构上主要采取外抛内锥带辅助切削齿的结构形式，在复合片上主要采用非平面结合方式，即采用双向多条直槽非平面结合。按此方案设计与生产了3只钻头，分别在3口井试用，直接钻穿砾石夹层馆陶组地层井段，钻井效率提高26%，突破了砾石夹层钻进不能使用PDC钻头的禁区。  相似文献   

PDC钻头切削齿破岩载荷规律的分析     

许爱 《探矿工程》2006,33(7):59-61

对PDC钻头冠部形状及不同的布齿密度和切削齿在不同的磨损状态下对PDC钻头切削齿受力的影响进行了分析；用相邻的3个切削齿之间的关系(不同的切削齿与切削齿之间的径向距离和切削齿之间的高度差)来分析PDC钻头冠部形状和切削齿布齿密度对切削齿受力的影响，以及将切削齿的磨损状态简化成与切削齿在钻头上装配方向垂直的平面来分析切削齿磨损状态对切削齿受力的影响。  相似文献   

硬致密泥岩钻进的新型复合片钻头的研究与应用          下载免费PDF全文

李雨蔡家品  贾美玲张建元 赵尔信 《探矿工程》2006,33(9):60-61,54

介绍了一种新型齿形的复合片钻头，在硬致密泥岩中钻进，与常规复合片钻头相比，具有很高的钻进效率和高的钻头寿命，解决了泥岩钻进效率低的难题。  相似文献   

PDC钻头在寺河煤矿瓦斯预抽放钻井中的应用   总被引：2，自引：1，他引：2  

吴小建  李新民 《中国煤田地质》2006,18(1):64-65,68

在寺河矿区一期瓦斯地面预抽放钻井施工中，使用传统的镶齿三牙轮钻头钻进，钻进速度低，仅为2.0m／h，且井斜不易控制、钻头寿命短、成本较高。通过对寺河煤矿地层特征的分析，在二期工程施工中，9#煤以上地层优选六翼内凹式PDC钻头钻进，采取一定技术措施并合理调整钻压、转速及泵量等钻进参数，钻速可达7．0m/h，井斜也得到有效控制，降低了钻井成本。  相似文献   

电镀PDC石油全面钻头及其在油气田中的应用          下载免费PDF全文

胡三虎 《探矿工程》1997,(1):45-46

采用低温电镀工艺生产ＰＤＣ石油全面钻头对金刚石无任何热损伤，对喷咀进行组合设计，在两口井中进行试验，取得了很好的经济效益和社会效益，并分析了钻头的特点及存在的问题。  相似文献   

合理设计岩屑规程保证正常钻进条件——金刚石钻进技术专题之一          下载免费PDF全文

汤凤林  段隆臣  В.Ф.Чихоткин  刘晓阳 《探矿工程》2004,31(6):45-48

论述了正常钻进的条件，提出了合理岩屑规程是保证正常钻进的关键和设计钻头的主要依据之一，讨论了岩屑规程与金刚石钻头唇面工作状态、孔底表面粗糙度和岩屑粒度的关系，提出了相应的建议。  相似文献   

桩基筒形翼状钻头的改进设计及应用     

杨建林  兰凯  段隆臣  张涛  徐辉雄 《地质科技情报》2005,24(Z1):19-22

针对浙江省温州市世贸中心大厦桩基施工中硬岩钻进时出现的堵管、卡钻和效率低等问题,从所钻地层和钻头的磨损分析出发,提出了钻头的改进设计方案.改进型筒形翼状钻头比原先使用的平底滚刀钻头增加了18个孕镶金刚石-针状硬质合金复合式钻齿和3个钎头,并按受力特点进行了合理分布.实际钻进效果表明改进型钻头应用于超深、大直径钻孔的钻进效率较高、钻进过程平稳.针对钻头的实际磨损情况提出了钻头进一步改进设计的建议.  相似文献