Advances in the fatigue assessment of wire ropes     

Alan G. Paton  Neil F. Casey  Joe Fairbairn  William M. Banks   《Ocean Engineering》2001,28(5)

This paper presents the findings from an in-depth analysis of the (axial) stiffness data recorded during tension–tension fatigue tests on wire ropes, particularly in relation to how changes in stiffness during testing relate to changes in rope strength. A linear relationship between stiffness and strength is shown to exist and a methodology presented for quantifying residual strength with applied cycles. New lower bound fatigue lines for six-strand rope and spiral strand are presented which are based on a 10% loss of strength. These new lines have the advantage of having been established using a common discard criterion for wire ropes.  相似文献   

倒Y形竖井联系测量   总被引：1，自引：0，他引：1  

曾燕  王利群  唐记城 《现代测绘》2008,31(3)

介绍在小直径竖井联系测量中取消联系三角形,改用单根钢丝定点,全站仪引测高程的施测方法。  相似文献   

加固含水平软弱层高陡边坡预应力锚索倾角的取值范围     

宋书志孔纪名  杨宗佶刘正梁 《山地学报》2006,24(B10):217-221

用直线和曲线滑面两种模型，模拟预应力锚索加固含有水平软弱层的高陡边坡的潜在滑动面，通过对锚索加固的力学机理分析来阐述预应力在滑动面主滑方向上产生分力的原因。从锚索受力角度上对锚索倾角的取值范围进行探讨，结合实际造孔过程有不同程度的孔斜或弯曲以及获取较好的锚固灌浆效果，就仰角锚固和俯角锚固两种锚固条件分别得出锚索倾角的取值范围，并以此来判定锚索的预应力是否会在滑动面走向方向上产生不利于坡体稳定的下滑力。  相似文献   

预应力锚索技术在大型水库除险加固工程中的应用          下载免费PDF全文

呼咏  孙志峰  田野 《探矿工程》2004,31(9):46-47,50

介绍了无粘结预应力锚固技术在吉林省二龙山水库除险加固工程中的应用。对造孔、编索、下索、张拉等工艺进行了详细介绍。  相似文献   

梧州某安置小区滑坡分析与治理设计研究     

唐名富  姚柏华  张紫峰  段娜  周洁军 《矿产与地质》2016,(3):477-481

文章从地层岩性、地质构造、水文地质条件等方面阐述该滑坡的基本特征,运用传递系数法对滑坡进行了稳定性分析与评价,为滑坡治理设计提供了依据。根据计算结果提出了采用削坡、预应力锚索+格构梁+锚杆挂网喷射混凝土防护,并结合生物防护及地表排水措施,具有较高的实践和理论意义。  相似文献   

地电供电系统对地磁观测的影响试验     

刘冰欣  黄宝琴 《地震》1994,(4):82-85

通过试验，认为地电供电系统对地磁观测的影响主要是来自供电导线产生的磁场，其强与公式Ｈ＝１／１０．２Ｉ／ｒ计算结果基本相符。而地下电流产生的磁场是很弱的，这对避免和减小其影响提供了新思维。  相似文献   

新型磁栅式引张线仪   总被引：1，自引：0，他引：1  

陈雪丰  巢佰崇  潘正风 《测绘信息与工程》2002,27(2):31-32

详细介绍了新型磁栅式引张线仪的原理、基本结构和系统组成，并对仪器的误差进行了初步的分析。陆水大坝的试验结果证明，该仪器可以满足规范要求。  相似文献   

古田溪一级大坝变形观测系统改造及自动化设计     

龚玉珍  邵有清 《四川测绘》1996,19(4):151-156

本文介绍了古田汉一级大坝原有变形观测项目及存在的主要问题，提出了观测系统改造的原则和要求。详细论述了各观测项目增设、改造及自动化设计的实施方案，给出了相应的精度估算。  相似文献   

电感耦合等离子体发射光谱法测定键合用硅铝丝中硅铁铜     

宋小年  冯天培 《岩矿测试》2006,25(2):189-190196

采用电感耦合等离子体发射光谱法测定硅铝丝（Al—1％Si）中Si及杂质元素Fe和Cu。确定了最少取样量和样品溶解方法，优化了元素分析谱线和仪器的测量条件。实验表明，方法的加标回收率为99％～1叭％，相对标准偏差（n=6）低于1．4％，Si、Fe、Cu的检出限分别为8．5、1．0和0．4μg／L。该方法应用于快速测定键合硅铝丝中的各种元素，结果满意。  相似文献   

Prediction of the sawing quality of Marmarit stones using the capability of artificial neural network     

Hassan Yarmohamadi Samani  Ali Reza Yarahmadi Bafghi 《国际地质力学数值与分析法杂志》2012,36(7):881-891

The sawing rate is one of the most significant and effective parameters in extracting building stones via diamond wire sawing. This parameter designates the capability of diamond wire sawing for sawing different stones; in addition, the parameter gives rise to economical considerations for quarry designers. In this study, the existent relations between stone geotechnical parameters and the sawing rate of stones via diamond wire sawing were analyzed using regression and correlation coefficient as well as the collected data from Marmarit stone quarries. Moreover, we estimated the sawing rate of Marmarit using the dimensional stone rock mass rating (DSRMR); upon comparison of the data obtained from DSRMR our pre‐collected data on quarries, we did not gain satisfactory results from DSRMR, hence we used artificial neural network (ANN). The results showed that the percentage of Silica, the coefficient of water absorption, the uniaxial compressive strength (UCS), and abrasive hardness are the proper parameters for creating the ANN. Discontinuities have the least effects possible on diamond wire sawing. Having given the training possibility of the ANN, and its ability to evaluate relations among input parameters, the ANN, which was being trained with Marmarit's traits, was an accurate network for estimating diamond wire sawing in Marmarit quarries, although it could not generalize this network for other stones such as Chini and Crystal. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献