The double solid reactant method: II. An application to the shallow groundwaters of the Porto Plain,Vulcano Island (Italy)     

Matteo Lelli  Roberto Cioni  Luigi Marini 《Environmental Geology》2008,56(1):139-158

This paper presents an example of application of the double solid reactant method (DSRM) of Accornero and Marini (Environmental Geology, 2007a), an effective way for modeling the fate of several dissolved trace elements during water–rock interaction. The EQ3/6 software package was used for simulating the irreversible water–rock mass transfer accompanying the generation of the groundwaters of the Porto Plain shallow aquifer, starting from a degassed diluted crateric steam condensate. Reaction path modeling was performed in reaction progress mode and under closed-system conditions. The simulations assumed: (1) bulk dissolution (i.e., without any constraint on the kinetics of dissolution/precipitation reactions) of a single solid phase, a leucite-latitic glass, and (2) precipitation of amorphous silica, barite, alunite, jarosite, anhydrite, kaolinite, a solid mixture of smectites, fluorite, a solid mixture of hydroxides, illite-K, a solid mixture of saponites, a solid mixture of trigonal carbonates and a solid mixture of orthorhombic carbonates. Analytical concentrations of major chemical elements and several trace elements (Cr, Mn, Fe, Ni, Cu, Zn, As, Sr and Ba) in groundwaters were satisfactorily reproduced. In addition to these simulations, similar runs for a rhyolite, a latite and a trachyte permitted to calculate major oxide contents for the authigenic paragenesis which are comparable, to a first approximation, with the corresponding data measured for local altered rocks belonging to the silicic, advanced argillic and intermediate argillic alteration facies. The important role played by both the solid mixture of trigonal carbonates as sequestrator of Mn, Zn, Cu and Ni and the solid mixture of orthorhombic carbonates as scavenger of Sr and Ba is emphasized.

Luigi Marini (Corresponding author)Email:

  相似文献   

Diel Patterns in Chlorophyll <Emphasis Type="Italic">a</Emphasis> Specific Absorption Coefficient and Absorption Efficiency Factor of Picoplankton     

Nobuaki?OhiEmail author  Hiroaki?Saito  Satoru?Taguchi 《Journal of Oceanography》2005,61(3):379-388

Diel patterns in the chlorophyll a specific absorption coefficient of surface picoplankton, a*_pico (γ) (m²·[mg chlorophyll a]⁻¹), were studied at 7 stations under daily cycle of in situ light condition in the western subarctic Pacific and Japan Sea. All the data were normalized by dividing the anomaly with daily averaged a*_pico (γ). Opposite diel patterns were observed for the normalized a*_pico (443) and a*_pico (675) with maximum toward dawn or dusk and minimum toward midday at 4 stations under low-irradiance (LI) conditions and vice versa at 3 stations under high-irradiance (HI) conditions. The absorption efficiency factors at red absorption peak, Q _a (675), were determined by reconstruction with intracellular chlorophyll a concentration and cell diameter. The normalized Q _a (675) also showed diel pattern with maximum toward midday and minimum toward dawn or dusk under LI. The diel pattern in a*_pico (675) and Q _a (675) were primarily caused by changes in intracellular chlorophyll a concentration due to photoadaptation under LI. The diel pattern in a*_pico (443) was influenced by pigmentation, as recognized by blue to red ratio [a*_pico (443)/a*_pico (675)] under HI. This study proposed that the opposite diel pattern in a*_pico (γ) might occur for a wide range of algal species. The results presented here have important consequences for the interpretation of diel variations in optical properties observed in the open ocean.  相似文献   

关于“包装产品的计量标准型一次抽检方案”的确定     

陈峥  赵维谦  李晓川 《中国海洋大学学报(自然科学版)》1989,(4)

本文给出了“包装产品的计量标准型一次抽检方案”,并通过一个实例说明本方案比一般《计量标准型一次抽检方案》更为优越。  相似文献   

System for normalization of a hamiltonian function based on lie series     

Krzysztof Gozdziewski  Andrzej J. Maciejewski 《Celestial Mechanics and Dynamical Astronomy》1990,49(1):1-10

A software system for normalization of a Hamiltonian function is described. A few examples of its applications are given. It is written in PASCAL and runs on an IBM XT/AT with 640 KB memory.  相似文献   

VLBI资料处理软件系统OCCAM V6.0简介     

张捍卫  胡晓民  王爱生 《测绘与空间地理信息》2005,28(3):47-50

OCCAM V6．0是在PC机上开发的一套VLBI大地测量数据处理软件。该软件用标准FORTRAN77(90)语言编写，可在Windows95以上版本和LINUX环境下的PC机上运行，其主要特点是操作简便、兼容性好、处理容量大、速度快和结果输出多样化等。随着该软件的不断改进和发展，利用OCCAM进行VLBI数据分析的学者逐渐增多，OCCAM软件的使用也日益广泛。本文简要介绍了OCCAM软件的安装、各个模块的主要功能和在运行中的注意事项，供今后OCCAM用户在使用过程中参考。  相似文献   

均匀土-箱基-结构相互作用体系的计算分析   总被引：4，自引：0，他引：4  

李培振  吕西林  陈波  陈跃庆 《地震工程与工程振动》2002,22(5):115-121

采用通用有限元程序ANSYS，针对捱动台试验中的均匀土-箱基-结构试验进行了三维有限元分析，计算中土体的本构模型采用等效线性模型，利用面-面接触单元考虑土体与基础交界面的状态非线性。计算表明，基础底面和土体发生滑移，基础侧面和土体之间发生了滑移和脱离，上部结构柱顶加速度反应主要由基础转动引起的摆动分量组成，通过与试验结果的对照研究，二者得出的规律基本一致，验证了采用的计算模型与分析方法的合理性，为进一步计算研究和实际工程应用奠定了基础。  相似文献   

用ANSYS模拟结构-地基动力相互作用振动台试验的建模方法   总被引：37，自引：6，他引：37  

陈波  吕西林  李培振  陈跃庆 《地震工程与工程振动》2002,22(1):126-131

本文以结构－地基动力相互作用振动台模型试验为基础，结合通用有限元软件ANSYS，对结构－地基动力相互作用体系进行有限元计算建模的一些问题作了研究，主要包括柔性土容器的模拟、土体动力本构模型的选用、土体与结构交界面上的状态非线性模型、网格划分、重力的考虑、结构中钢筋的处理以及对称性的应用等。文中给出了利用上述建模方法对结构－地基动力相互作用体系进行计算的一些加速度时程结果，并与试验结果相对照，吻合较好。通过计算分析，验证了简化处理方法的合理性和计算模型的可行性。  相似文献   

国外中期数值预报业务模式的性能及发展趋势   总被引：1，自引：0，他引：1       下载免费PDF全文

杨学胜 《气象》1997,23(1):3-10

作者简单介绍了国内预报员较为熟悉的欧洲中期天气预报中心，美国国家气象中心和日本气象厅三个中期预报模式的性能及预报效果，包括近几年颇为流行的半拉格朗日时间积分方案，物理过程参数化方案的完善和改进，中期数值预报业务模式的发展趋势等。  相似文献   

A stochastic method for the prediction of icebreaker bow extreme stresses     

《Applied Ocean Research》2019

It is well established that the ship-ice interaction process is quite complex and associated ice loads on the icebreaker hull is a stochastic process. Obviously, novel accurate statistical methods and models should be developed and applied to estimate extreme bow stresses.This paper studies icebreaker bow stresses based on measured distribution of ice thickness in the Arctic Ocean on the way to and from the North Pole. Since the vessel route was carefully selected searching for easier ice conditions, the Arctic Ocean crossing was not a straight linear but a meandering path. Thus, the specific ship route data was biased with respect to general ice statistics in the region, but true with respect to the route specific ice data encountered by a ship navigating in that region. Therefore the route specific ice thickness data is directly needed for ship design and navigation analysis. It is assumed that captains are competent and knowledgeable, and therefore will select a route that provides the most favourable ice conditions.This paper contributes to study of the newest Chinese self-designed polar icebreaker, serving the purpose of enhancing icebreaker operational reliability. Finite Element Method software package ANSYS/LS-DYNA has been employed to simulate bow stress pattern for a particular icebreaker operating in the Arctic Ocean. Extreme bow stresses were estimated using Naess-Gaidai method. The latter is a first application of Naess-Gaidai method to a distribution with lower bound. Thus this paper aims at introducing an efficient method of estimating route-specific icebreaker extreme bow stresses.  相似文献   

基于耦合场分割算法的ANSYS二次开发及其应用   总被引：2，自引：0，他引：2  

周健  孔戈  张刚  秦天 《地震工程与工程振动》2006,26(2):73-79

耦合场分割算法是当前研究的热点之一。本文首先对比研究了瞬态热传导方程和孔压增长消散方程,提出了一种适用于ANSYS二次开发的分割算法,并对2种不同的预测值计算模式对计算稳定性的影响进行了分析。然后,据之对ANSYS温度—结构耦合场模块进行了开发,形成了岩土工程有效应力计算模块。数值实验表明,这种方法具有较高的计算精度和良好的计算稳定性,并且能够充分利用现有程序资源,具有较高的工程应用价值。  相似文献