Experimental investigations in a recirculating wind tunnel of the mechanisms of formation of accretionary lapilli have demonstrated that growth is controlled by collision of liquid-coated particles, due to differences in fall velocities, and binding as a result of surface tension forces and secondary mineral growth. The liquids present on particle surfaces in eruption plumes are acid solutions stable at 100% relative humidity, from which secondary minerals, e.g. calcium sulphate and sodium chloride, precipitate prior to impact of accretionary lapilli with the ground. Concentric grain-size zones within accretionary lapilli build up due to differences in the supply of particular particle sizes during aggregate growth. Accretionary lapilli do not evolve by scavenging of particles by liquid drops followed by evaporation — a process which, in wind tunnel experiments, generates horizontally layered hemispherical aggregates. Size analysis of particles in the wind tunnel air stream and particles adhering to growing aggregates demonstrate that the aggregation coefficient is highly grain-size dependent. Theoretical simulation of accretionary lapilli growth in eruption plumes predicts maximum sizes in the range 0.7–20 mm for ash cloud thicknesses of 0.5–10 km respectively. 相似文献
The pipe shapes, infill and emplacement processes of the Attawapiskat kimberlites, including Victor, contrast with most of the southern African kimberlite pipes. The Attawapiskat kimberlite pipes are formed by an overall two-stage process of (1) pipe excavation without the development of a diatreme (sensu stricto) and (2) subsequent pipe infilling. The Victor kimberlite comprises two adjacent but separate pipes, Victor South and Victor North. The pipes are infilled with two contrasting textural types of kimberlite: pyroclastic and hypabyssal-like kimberlite. Victor South and much of Victor North are composed of pyroclastic spinel carbonate kimberlites, the main features of which are similar: clast-supported, discrete macrocrystal and phenocrystal olivine grains, pyroclastic juvenile lapilli, mantle-derived xenocrysts and minor country rock xenoliths are set in serpentine and carbonate matrices. These partly bedded, juvenile lapilli-bearing olivine tuffs appear to have been formed by subaerial fire-fountaining airfall processes.
The Victor South pipe has a simple bowl-like shape that flares from just below the basal sandstone of the sediments that overlie the basement. The sandstone is a known aquifer, suggesting that the crater excavation process was possibly phreatomagmatic. In contrast, the pipe shape and internal geology of Victor North are more complex. The northwestern part of the pipe is dominated by dark competent rocks, which resemble fresh hypabyssal kimberlite, but have unusual textures and are closely associated with pyroclastic juvenile lapilli tuffs and country rock breccias±volcaniclastic kimberlite. Current evidence suggests that the hypabyssal-like kimberlite is, in fact, not intrusive and that the northwestern part of Victor North represents an early-formed crater infilled with contrasting extrusive kimberlites and associated breccias. The remaining, main part of Victor North consists of two macroscopically similar, but petrographically distinct, pyroclastic kimberlites that have contrasting macrodiamond sample grades. The juvenile lapilli of each pyroclastic kimberlite can be distinguished only microscopically. The nature and relative modal proportion of primary olivine phenocrysts in the juvenile lapilli are different, indicating that they derive from different magma pulses, or phases of kimberlite, and thus represent separate eruptions. The initial excavation of a crater cross-cutting the earlier northwestern crater was followed by emplacement of phase (i), a low-grade olivine phenocryst-rich pyroclastic kimberlite, and the subsequent eruption of phase (ii), a high-grade olivine phenocryst-poor pyroclastic kimberlite, as two separate vents nested within the original phase (i) crater. The second eruption was accompanied by the formation of an intermediate mixed zone with moderate grade. Thus, the final pyroclastic pipe infill of the main part of the Victor North pipe appears to consist of at least three geological/macrodiamond grade zones.
In conclusion, the Victor kimberlite was formed by several eruptive events resulting in adjacent and cross-cutting craters that were infilled with either pyroclastic kimberlite or hypabyssal-like kimberlite, which is now interpreted to be of probable extrusive origin. Within the pyroclastic kimberlites of Victor North, there are two nested vents, a feature seldom documented in kimberlites elsewhere. This study highlights the meaningful role of kimberlite petrography in the evaluation of diamond deposits and provides further insight into kimberlite emplacement and volcanism. 相似文献
In this contribution we report a study of poorly exposed, rhyodacitic welded-ignimbrite deposit from Minas Gerais. A petrographic study of textures indicate high temperature of emplacement. Key features include eutaxitic texture, flattened and agglutinated lapilli and glass menisci. Most of the feldspar minerals and glass are extensively altered to clay minerals, which pseudomorph the original volcanic textures. Glass menisci and spherules suggest a possible process of liquid immiscibility. Immobile trace element distribution indicates a possible link with other post-Palaeozoic felsic volcanic rocks in Brazil, a magmatism interpreted as due to basaltic underplating and partial melting of a hydrous continental crust. A peculiar feature is a high Light REE/Heavy REE ratio. Depletion in heavy rare earth elements is possibly due to a residual HREE-bearing phase in the source. The geologic context of these rocks suggests a Lower Cretaceous age and a tectonic relationship with a continental rifting event. 相似文献
The late Pleistocene San Venanzo maar and nearby Pian di Celle tuff ring in the San Venanzo area of Umbria, central Italy, appear to represent different aspects of an eruptive cycle accompanied by diatreme formation. Approximately 6x106 m3 of mostly lapillisized, juvenile ejecta with lesser amounts of lithics and 1x106 m3 of lava were erupted. The stratigraphy indicates intense explosive activity followed by lava flows and subvolcanic intrusions. The pyroclastic material includes lithic breccia derived from vent and diatreme wall erosion, roughly stratified lapilli tuff deposited by concentrated pyroclastic surge, chaotic scoriaceous pyroclastic flow and inverse graded grain-flow deposits. The key feature of the pyroclastics is the presence of concentric-shelled lapilli generated by accretion around the lithics during magma ascent in the diatreme conduits. The rock types range from kalsilite leucite olivine melilitite lavas and subvolcanic intrusions to carbonatite, phonolite and calcitic melilitite pyroclasts. Juvenile ejecta contain essential calcite whose composition and texture indicate a magmatic origin. Pyroclastic carbonatite activity is also indicated by the presence of carbonatite ash beds. The San Venanzo maar-forming event is believed to have been trigered by fluid-rich carbonatite-phonolite magma. The eruptive centre the moved to the Pian di Celle tuff ring, where the eruption of degassed olivine melilititic magma and late intrusions ended magmatic activity in the area. In both volcanoes the absence of phreatomagmatic features together with the presence of large amounts of primary calcite suggests carbonatite segregation and violent exsolution of CO2 which, flowing through the diatremes, produced the peculiar intrusive pyroclastic facies and triggered explosions. 相似文献
Ambae Island is a mafic stratovolcano located in the northern Vanuatu volcanic arc and has a NE–SW rift-controlled elongated shape. Several hundred scoria cones and fissure-fed lava fields occur along its long axis. After many decades of quiescence, Ambae Island erupted on the 28th of November 2005, disrupting the lives of its 10,000 inhabitants. Its activity remained focused at the central (crater-lake filled) vent and this is where hazard-assessments were focused. These assessments initially neglected that maars, tephra cones and rings occur at each tip of the island where the eruptive activity occurred < 500 and < 300 yr B.P. The products of this explosive phreatomagmatic activity are located where the rift axis meets the sea. At the NE edge of the island five tephra rings occur, each comparable in size to those on the summit of Ambae. Along the NE coastline, a near-continuous cliff section exposes an up to 25 m thick succession of near-vent phreatomagmatic tephra units derived from closely spaced vents. This can be subdivided into two major lithofacies associations. The first association represents when the locus of explosions was below sea level and comprises matrix-supported, massive to weakly stratified beds of coarse ash and lapilli. These are dominant in the lowermost part of the sequence and commonly contain coral fragments, indicating that the loci of explosion were located within a reef or coral sediment near the syn-eruptive shoreline. The second type indicate more stable vent conditions and rapidly repeating explosions of high intensity, producing fine-grained tephra with undulatory bedding and cross-lamination as well as megaripple bedforms. These surge and fall beds are more common in the uppermost part of the succession and form a few-m-thick pile. An older tephra succession of similar character occurs below, and buried trees in growth position, as well as those flattened within base surge beds. This implies that the centre of this eruption was very near the coastline. The processes implied by these deposits are amongst the most violent forms of volcanism on this island. In addition, the lowland and coastal areas affected by these events are the most heavily populated. This circumstance is mirrored on many similar volcanic islands, including the nearby SW Pacific examples of Taveuni (Fiji), Upolu and Savai'i (Samoa), and Ambrym (Vanuatu). These locations are paradoxically often considered safe areas during summit/central-vent eruptions, simply because they are farthest from the central sources of ash-fall and lahar hazard. The observations presented here necessitate a revision of this view. 相似文献
The Monticchio Lakes Formation MLF is a newly identified carbonatite-melilitite tuff sequence which is exposed in the southwestern sector of the Vulture volcano. It is the youngest example ca. 0.13 m.y. of this type of volcanism in Italy, although other carbonatites of smaller volume, but with similar characteristics, have been discovered recently. This volcanic event occurred in isolation after a 0.35 m.y. period of inactivity at Vulture. The eruption produced two maar-type vents and formed tuff aprons mainly composed of dune beds of lapilli. Depositional features suggest that a dry surge mechanism, possibly triggered by CO2 expansion, was dominant during tuff emplacement. The MLF event involved a mixture of carbonatite and melilitite liquids which were physically separated before the eruption. Abundant mantle xenoliths are direct evidence of the deep-seated origin of the parental magma and its high velocity of propagation towards the surface. Often, these nodules form the core of lapilli composed of concentric shells of melilitite andror porphyritic carbonatite. Coarse-ash beds alternate with lapilli beds and consist of abundant lumps and spherulae of very fine-grained calcite immersed in a welded, highly compacted carbonatite matrix. Porphyritic carbonatite shells of the lapilli and fine-grained spherulae of calcite in the tuff matrix suggest incipient crystallisation of a carbonatite liquid in subvolcanic conditions and eruption of carbonatite-spray droplets. Dark coloured juvenile fragments mainly consist of melilite, phlogopite, calcite, apatite, perovskite, and häuyne crystals in a carbonatite or melilitite matrix. The rocks have an extremely primitive, ultramafic composition with very high Mga) 85. and Cr and Ni content 1500 ppm-. The calcite contains high SrO, BaO and REE of up to 1.5 wt.%. Similar compositions are typical of primary, magmatic carbonates which are found in both intrusive and extrusive carbonatites. The high modal Sr-Ba-REE-rich calcite, the typical mineralogy, and the high amount of Sr-group elements identify the carbonate component as a carbonatite. The very high Mga, mantle debris and C, O, He isotope ratios in the range of mantle values indicate a near-primary character for the carbonatite which is distinctive of a restricted group of extrusive carbonatites only found in continental rift areas. 相似文献
This paper describes the internal organisation of two diatremes (Águas Emendadas and Neuzinha) and one small breccia-filled conduit (Tigre) in the central portion of the Late Cretaceous Goiás Alkaline Province (GAP), central Brazil, and explores the criteria for facies recognition. The GAP kamafugitic diatremes are emplaced into Carboniferous sandstones of the Aquidauana Formation, at the northern margin of the Paraná Basin. They are usually elliptical structures, not longer than 900 m, filled with breccia and partially covered by thin kamafugitic to basanitic lava flows. The breccias are dominated by juvenile pyroclasts, with subordinate amounts of cognate fragments and xenoliths. In addition to variations in ash and lapilli proportions, juvenile fragment types may be used to discriminate genetic processes and the corresponding pyroclastic deposits.
An extensive field, textural and compositional dataset was analysed by multivariate statistical techniques. Combined with field observations, this allowed us to define a set of facies for kamafugitic diatremes, and, more importantly, to understand the internal structure of the studied bodies and to cross-correlate them. Seven distinct facies were recognised. The Fluidised Conduit Facies (FCF) represents high-energy, strongly fluidised but only moderately fragmented systems. It occurs in a confined environment, and is typical of deeper parts of the conduit, before the actual diatreme level is reached by the ascending fluidised magma. Large amounts of spinning droplets are formed within this region. The Fluidised Conduit–Diatreme Facies (FCDF) is characteristic of intermediate depths in the conduit, where highly fluidised and highly fragmented systems produce large amounts of ash. Spinning droplets decrease in abundance, ordinary juvenile fragments become very common, and xenoliths from the country rock in the immediate vicinity of the diatreme are present. The Fluidised Fragmented Facies (FFF) and the Magmatic Fluidised Facies (MFF) produce very heterogeneous deposits that dominate the shallower part of the system, making up most of the diatreme-filling materials. The Fluidised Fragmented Facies can be distinguished by much higher degrees of fluidisation, fragmentation and system energy. It occupies the internal part of the diatreme and is characterised by the common presence of tuff pockets, tuff fragments, and accretionary and armoured lapilli. The Magmatic Fluidised Facies typically occupies the outer portion of the diatreme and can be distinguished from the Fluidised Fragmented Facies by the dominance of lapilli over ash and by the presence of abundant wrapped fragments. The Magmatic Facies (MF) and the Coherent Magmatic Facies (CMF) are volumetrically subordinate and represent late stages, when less fluidised and less fragmented material, or even coherent magma erupts relatively passively, in the aftermath of the main explosive stage that generated the diatreme. The Border Facies is defined by the increased abundance of material from the immediate country rock. At Águas Emendadas and Neuzinha this facies is marked by the presence of fragments of peperite-like rock, formed by the interaction of the fluidised magma with friable sandstone. 相似文献
The Cambrian Gahcho Kué kimberlite cluster includes four main pipes that have been emplaced into the Archaean basement granitoids of the Slave Craton. Each of the steep-sided pipes were formed by the intrusion of several distinct phases of kimberlite in which the textures vary from hypabyssal kimberlite (HK) to diatreme-facies tuffisitic kimberlite breccia (TKB). The TKB displays many diagnostic features including abundant unaltered country rock xenoliths, pelletal lapilli, serpentinised olivines and a matrix composed of microlitic phlogopite and serpentine without carbonate. The HK contains common fresh olivine set in a groundmass composed of monticellite, phlogopite, perovskite, serpentine and carbonate. A number of separate phases of kimberlite display a magmatic textural gradation from TKB to HK, which is characterised by a decrease in the proportion of pelletal lapilli and country rock xenoliths and an increase in groundmass crystallinity, proportion of fresh olivine and the degree of xenolith digestion.
The pipe shapes and infills of the Gahcho Kué kimberlites are similar to those of the classic South African pipes, particularly those of the Kimberley area. Similar intrusive magmatic emplacement processes are proposed in which the diatreme-zone results from the degassing, after breakthrough, of the intruding magma column. The transition zones represent ‘frozen’ degassing fronts. The style of emplacement of the Gahcho Kué kimberlites is very different from that of many other pipes in Canada such as at Lac de Gras, Fort à la Corne or Attawapiskat. 相似文献
The Glaramara tuff presents extensive exposures of the medial and distal deposits of a large tuff ring (original area >800 km2) that grew within an alluvial to lacustrine caldera basin. Detailed analysis and correlation of 21 sections through the tuff show that the eruption involved phreatomagmatic to magmatic explosions resulting from the interaction of dacitic magma and shallow-aquifer water. As the eruption developed to peak intensity, numerous, powerful single-surge pyroclastic density currents reached beyond 8 km from the vent, probably >12 km. The currents were strongly depletive and deposited coarse lapilli (>5 cm in diameter) up to 5 km from source, with only fine ash and accretionary lapilli deposited beyond this. As the eruption intensity waned, currents deposited fine ash and accretionary lapilli across both distal and medial regions. The simple wax–wane cycle of the eruption produced an overall upward coarsening to fining sequence of the vertical lithofacies succession together with a corresponding progradational to retrogradational succession of lithofacies relative to the vent. Various downcurrent facies transitions record transformations of the depositional flow-boundary zones as the depletive currents evolved with distance, in some cases transforming from granular fluid-based to fully dilute currents primarily as a result of loss of granular fluid by deposition. The tuff-ring deposits share several characteristics with (larger) ignimbrite sheets formed during Plinian eruptions and this underscores some overall similarities between pyroclastic density currents that form tuff rings and those that deposit large-volume ignimbrites. Tuff-ring explosive activity with such a wide area of impact is not commonly recognized, but it records the possibility of such currents and this should be factored into hazard assessments. 相似文献
