排序方式： 共有8条查询结果，搜索用时 31 毫秒
1
1.
Primary Ore Mineral Assemblage and Fluid Inclusion Study of the Batu Hijau Porphyry Cu-Au Deposit, Sumbawa, Indonesia 总被引：3，自引：0，他引：3
Abstract. The Batu Hijau porphyry Cu‐Au deposit, Sumbawa Island, Indonesia, is associated with a tonalitic intrusive complex. The temperature‐pressure condition of mineralization at the Batu Hijau deposit is discussed on the basis of fluid inclusion microthermometry. Then, the initial Cu‐Fe sulfide mineral assemblage is discussed. Bornite and chalcopyrite are major copper ore minerals associated with quartz veinlets. The quartz veinlets have been classified into ‘A’ veinlets associated with bornite, digenite, chalcocite and chalcopyrite, ‘B’ veinlets having chalcopyrite bornite along vuggy center‐line, rare ‘C’ chalcopyrite‐quartz veinlets, and late ‘D’ veinlets consisting of massive pyrite and quartz (Clode et al., 1999). Copper and gold mineralization is associated with abundant ‘A’ quartz veinlets. Abundant fluid inclusions are found in veinlet quartz consisting mainly of gas‐rich inclusions and polyphase inclusions throughout the veinlet types. The hydrothermal activity occurred in temperature‐pressure conditions of aqueous fluid immiscibility into hypersaline brine and dilute vapor. The halite dissolution (Tm[halite]) and liquid‐vapor homogenization (Th) temperatures of the polyphase inclusions in veinlet quartz range from 270 to 472d?C and from 280 to 454d?C, respectively. The estimated salinity ranges from 36 to 47 wt% (NaCl equiv.). The apparent pressures lower than 300 bars are estimated to have been along the liquid‐vapor‐halite curve for the fluid inclusions having the Th lower than the Tm that trapped the brine saturated with halite, or at slightly higher pressure relative to liquid‐vapor‐halite curve for the fluid inclusions having the Th higher than the Tm that trapped the brine unsaturated with halite. The actual temperature and pressure during the hydrothermal activity at the Batu Hijau deposit are estimated to have been around 300d?C and 50 bars. At such temperature‐pressure conditions, the principal and initial Cu‐Fe sulfide mineral assemblages are thought to be chalcopyrite + bornite solid solution (bnss) for the chalcopyrite‐bearing assemblage, and chalcocite‐digenite solid solution and bnss for the chalcopyrite‐free assemblage. 相似文献
2.
The Batu Hijau deposit is the only porphyry type deposit in production in the Sunda‐Banda arc, Indonesia. This study discusses the reason for the localization of copper grade at the deep part of the deposit based on the observation of opaque mineral assemblage. In addition, the formation condition of quartz veins and opaque minerals is discussed on the basis of the fluid inclusion microthermometry. Samples were selected from drill holes SBD100, SBD168, SBD194, SBD254, and SBD257 to cover the wide vertical range. At the Batu Hijau deposit, quartz veins have been classified mainly into four types called A, B, C and D veins, and the A veins contain mainly bornite, often associated with digenite and chalcocite. In addition, magnetite occurs in A veins. However, at the deep part of the deposit, there are quartz veins associated with magnetite, but few copper sulfides such as bornite and chalcopyrite in quartz veins, as observed in SBD257. Quartz veins at depth in SBD257 have abundant magnetite and pyrite. Pyrite in quartz veins at depth in SBD257 mainly occur at the rim of magnetite grains or interstices between them. In quartz veins in SBD254, there are abundant copper sulfides such as bornite and chalcopyrite in spite of the depth. Bornite and chalcopyrite occur as inclusions in magnetite grains in quartz veins in SBD254. Pyrite which often occurs in low grade zone in quartz veins in SBD254 is also recognized at the rims of copper sulfides. This indicates that pyrite in SBD257 and SBD254 formed later than magnetite. On the other hand, blebs of bornite and chalcopyrite inclusions in magnetite grains, which are recognized in quartz veins in SBD168 at shallow high grade part, suggest that the hydrothermal fluid, from which magnetite was deposited also brought the copper sulfides such as bornite and chalcopyrite to the deep part of the Batu Hijau deposit. Therefore, it is concluded that initially the high grade ore zone extended to depth without localization. However due to the later overprinting hydrothermal activity, copper sulfides and magnetite were replaced or dissolved and pyrite was formed, resulting the low grade zone at the deep part of the deposit. Dissolution temperatures (Td) of halite obtained by from fluid inclusion microthermometry show significant differences between SBD168 and other drill holes. The high Td obtained in SBD168 may indicate larger volume of NaCl crystals in hydrothermal fluid at the time of entrapment of the fluid inclusions and formation of other opaque minerals such as magnetite and copper‐iron sulfides. It suggests that the ratio of vapor to brine is also higher at the shallow part of the deposit. The higher vapor to brine ratio may suggest a higher degree of boiling. Removal of vapor phase separated from brine during boiling increases the concentration of substances dissolved in the brine, and this will result in saturation, as evidenced by the salinity and NaCl saturation. The higher degree of boiling suggested by the higher vapor to brine ratio at shallow part may have increased the copper concentration in the brine that may have lead the saturation, resulted in the deposition of copper‐bearing minerals. 相似文献
3.
This paper discusses the mineralogy, whole-rock geochemistry and elemental mass balance of the hydrothermal alteration zones within the Batu Hijau porphyry copper-gold deposit, Sumbawa Island, Indonesia. The hydrothermal alteration and mineralisation developed in four stages, namely (i) the early stage consisting of a central copper-gold-bearing biotite (potassic), proximal actinolite (inner propylitic) and the distal chlorite-epidote (outer propylitic) zones; (ii) the transitional stage represented by the chlorite-sericite (intermediate argillic) zone; (iii) the late stages distinguished into the sericite-paragonite (argillic) and pyrophyllite-andalusite (advanced argillic) zones; and (iv) the very late stage typified by the illite-sericite zone. In general, major elements (particularly Ca, Mg, Na and K) and some minor and rare earth elements decrease from the least altered rocks towards the late alteration zones as a consequence of the breakdown of Ca-bearing hornblende, biotite and plagioclase. Chemical discrimination by means of millicationic R1 -R2 diagram indicates that R1 [4Si − 11(Na + K) − 2(Fe + Ti)] increases while R2 [6Ca + 2Mg + Al] decreases with increasing alteration intensity, from least-altered, through early, transitional, to late alteration zones. Rare earth elements-chondrite (C1 ) normalised patterns also exhibit the depletion of the elements through the subsequent alteration zones. These results are consistent with the elemental mass balance calculation using the isocon method which shows that the degree of mass and volume depletion systematically increases during alteration. A decrease of the elements as well as mass and volume from early, through transitional to late alteration stages may imply a general decrease of the element activities in hydrothermal fluids during the formation of the alteration zones. 相似文献
4.
5.
6.
Copper–gold mineralization at the world‐class Batu Hijau porphyry deposit, Sumbawa Island, Indonesia, is closely related to the emplacement of multiple stages of tonalite porphyries. Petrographic examination indicates that at least two texturally distinct types of tonalite porphyries are currently recognized in the deposit, which are designated as “intermediate tonalite” and “young tonalite”. They are mineralogically identical, consisting of phenocrysts of plagioclase, hornblende, quartz, biotite and magnetite ± ilmenite, which are set in a medium‐coarse grained groundmass of plagioclase and quartz. The chemical composition of the rock‐forming minerals, including plagioclase, hornblende, biotite, magnetite and ilmenite in the tonalite porphyries was systematically analyzed by electron microprobe. The chemical data of these minerals were used to constrain the crystallization conditions and fluorine–chlorine fugacity of the corresponding tonalitic magma during its emplacement and crystallization. The crystallization conditions, including temperature (T), pressure (P) and oxygen fugacity (fO2), were calculated by applying the hornblende–plagioclase and magnetite–ilmenite thermometers and the Al‐in‐hornblende barometer. The thermobarometric data indicate that the tonalite porphyries were emplaced at 764 ± 22°C and 1.5 ± 0.3 × 105 kPa. If the pressure is assumed to be lithostatic, it is interpreted that the rim of hornblende and plagioclase phenocrysts crystallized at depths of approximately 5.5 km. As estimated from magnetite–ilmenite thermometry, the subsolidus conditions of the tonalite intrusion occurred at temperatures of 540–590°C and log fO2 ranging from ?20 to ?15 (between Ni‐NiO and hematite–magnetite buffers). This occurred at relatively high fO2 (oxidizing) condition. The fluorine–chlorine fugacity in the magma during crystallization was determined on the basis of the chemical composition of magmatic biotite. The calculation indicates that the fluorine–chlorine fugacity, represented by log (fH2O)/(fHF) and (fH2O)/(fHCl) in the corresponding tonalitic magma range from 4.31 to 4.63 and 3.62 to 3.79, respectively. The chlorine fugacity (HCl) to water (H2O) is relatively higher than the fluorine fugacity (HF to water), reflecting a high activity of chlorine in the tonalitic magma during crystallization. The relatively higher activity of chlorine (rather than fluorine) may indicate the significant role of chloride complexes (CuCl2? and AuCl2?) in transporting and precipitating copper and gold at the Batu Hijau deposit. 相似文献
7.
Arifudin Idrus Jochen Kolb F.Michael Meyer Johan Arif Dudy Setyandhaka Syamsul Kepli 《Resource Geology》2009,59(3):295-306
Batu Hijau is a world-class gold-rich porphyry copper deposit, situated in Sumbawa Island, Indonesia. Deep drilling indicates that several intervals of calc-silicate rock were intersected, where they are apparently interbedded with volcaniclastic rocks. The calc-silicate rocks occur at the contact with copper-gold-bearing tonalite porphyries. The rocks are fine-grained and granular with green, reddish-brown and white layers. The green layers consist mostly of fine-grained clinopyroxene (diopside and hedenbergite) and the reddish-brown layers consist mostly of garnet (andradite), whereas the white layers are commonly composed of calcite and zeolite (chabazite). The calc-silicate rocks were formed by contact metasomatism of andesitic volcaniclastic rocks, as it is calcic in composition. Paragenesis study reveals at least two stages of calc-silicate mineralization. Stage 1 (prograde) is characterized by the presence of garnet (andradite), clinopyroxene (diopside and hedenbergite), anorthite and quartz at 340–360 C (high salinity 35–45 NaCl wt percentage eqn.). Stage 2 (retrograde) is characterized by chlorite and rare epidote at 280–300 C (low salinity 1–10 NaCl wt% eqn.). Late calcite ± quartz veinlets and calcite + chabazite veins/veinlets may also be related to this stage and cross cut the oldest mineral assemblages. Mineralization (magnetite, chalcopyrite and pyrite) may occur during the retrograde stage. Clinopyroxene and garnet were modified by Fe-rich hydrothermal fluid (oxidizing condition) indicated by increase of Fe from core to rim of both the cogenetic minerals. The presence of the calc-silicate rocks associated with massive magnetite-chalcopyrite-pyrite assemblage indicates the occurrence of calcic-exoskarn surrounding the Batu Hijau porphyry copper-gold deposit. 相似文献
8.
Gold paragenesis and chemistry at Batu Hijau, Indoneisa: implications for gold-rich porphyry copper deposits 总被引：3，自引：0，他引：3
Gold is an important by-product in many porphyry-type deposits but the distribution and chemistry of gold in such systems remains poorly understood. Here we report the results of petrographic, electron microprobe, laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS), and flotation test studies of gold and associated copper sulfides within a paragenetic framework from the world-class Batu Hijau (914 mt @ 0.53% Cu, 0.40 g/t Au) porphyry copper–gold deposit, Indonesia. Unlike many other porphyry copper–gold deposits, early copper minerals (bornite–digenite–chalcocite) are well preserved at Batu Hijau and the chalcopyrite–pyrite overprint is less developed. Hence, it provides an excellent opportunity to study the entire gold paragenesis of the porphyry system. In 105 polished thin sections, 699 native gold grains were identified. Almost all of the native gold grains occurred either within quartz veins, attached to sulfide, or as free gold along quartz or silicate grain boundaries. The native gold grains are dominantly round in shape and mostly 1–12 m in size. The majority of gold was deposited during the formation of early A veins and is dominantly associated with bornite rather than chalcopyrite. The petrographic and LA-ICP-MS study results indicate that in bornite-rich ores gold mostly occurs within copper sulfide grains as invisible gold (i.e., within the sulfide structure) or as native gold grains. In chalcopyrite-rich ores gold mostly occurs as native gold grains with lesser invisible gold. Petrographic observations also indicate a higher proportion of free gold (native gold not attached to any sulfide) in chalcopyrite-rich ores compared to bornite rich ores. The pattern of free gold distribution appears to correlate with the flotation test data, where the average gold recovery value from chalcopyrite-rich ores is consistently lower than bornite-rich ores. Our data suggest that porphyry copper-gold deposits with chalcopyrite-rich ores are more likely to have a higher proportion of free gold and may require different ore processing strategies.Editorial handling: R. P. Richards 相似文献
1