An integrated GIS-based tool (GTIS) was constructed to estimate site effects related to the earthquake hazards in the Gyeongju area of Korea. To build the GTIS for the study area, intensive site investigations and geotechnical data collections were performed and a walk-over site survey was additionally carried out to acquire surface geo-knowledge data in accordance with the procedure developed to build the GTIS. For practical applications of the GTIS used to estimate the site effects associated with the amplification of ground motion, seismic microzoning maps of the characteristic site period and the mean shear wave velocity to a depth of 30 m were created and presented as a regional synthetic strategy addressing earthquake-induced hazards. Additionally, based on one-dimensional site response analyses, various seismic microzoning maps for short- and mid-period amplification potentials were created for the study area. Case studies of seismic microzonations in the Gyeongju area verified the usefulness of the GTIS for predicting seismic hazards in the region. 相似文献
A screening and ranking framework (SRF) has been developed to evaluate potential geologic carbon dioxide (CO2) storage sites on the basis of health, safety, and environmental (HSE) risk arising from CO2 leakage. The approach is based on the assumption that CO2 leakage risk is dependent on three basic characteristics of a geologic CO2 storage site: (1) the potential for primary containment by the target formation; (2) the potential for secondary containment
if the primary formation leaks; and (3) the potential for attenuation and dispersion of leaking CO2 if the primary formation leaks and secondary containment fails. The framework is implemented in a spreadsheet in which users
enter numerical scores representing expert opinions or published information along with estimates of uncertainty. Applications
to three sites in California demonstrate the approach. Refinements and extensions are possible through the use of more detailed
data or model results in place of property proxies. 相似文献
The influence of local geologic and soil conditions on the intensity of ground shaking is addressed in this study. The amplification
of the ground motion due to local site effects resulted in severe damage to dwellings in the Bam area during the 2003 Bam
Earthquake. A unique set of strong motion acceleration recordings was obtained at the Bam accelerograph station. Although
the highest peak ground acceleration recorded was the vertical component (nearly 1 g), the longitudinal component (fault-parallel
motion) clearly had the largest maximum velocity as well as maximum ground displacement. Subsurface geotechnical and geophysical
(down-hole) data in two different sites have been obtained and used to estimate the local site condition on earthquake ground
motion in the area. The ground response analyses have been conducted considering the nonlinear behavior of the soil deposits
using both equivalent linear and nonlinear approaches. The fully nonlinear method embodied in FLAC was used to evaluate the
nonlinear soil properties on earthquake wave propagation through the soil layer, and compare with the response from the equivalent
linear approach. It is shown that thick alluvium deposits amplified the ground motion and resulted in significant damage in
residential buildings in the earthquake stricken region. The comparison of results indicated similar response spectra of the
motions for both equivalent and nonlinear analyses, showing peaks in the period range of 0.3–1.5 s. However, the amplification
levels of nonlinear analysis were less than the equivalent linear method especially in long periods. The observed response
spectra are shown to be above the NEHRP building code design requirements, especially at high frequencies. 相似文献
Field observations on ground motions from recent earthquakes imply that current knowledge is limited with regard to relating vertical and horizontal motions at liquefiable sites. This paper describes a study with the purpose of clarifying this emerging issue to some extent. A series of numerical analyses is carried out on a liquefiable soil deposit with a verified, fully coupled, nonlinear procedure. It is shown that the transformation of vertical motions in the deposit differs considerably from the transformation of horizontal motions. Both the amplitude and frequency content of the horizontal motions are strongly dependent on the shaking level or the associated nonlinear soil behavior. The transfer function for vertical motions is however likely to be independent of the intensity of input motions; no reduction in the amplitude occurs even in the case of strong shaking. The results are shown to be in consistence with the laboratory observations on shaking table tests and recent field observations that less nonlinearity exists for vertical motions. It is also shown that the possibility exists for using information on spectral ratios between the horizontal and vertical surface motions to quickly identify in situ soil behavior and liquefaction that are not readily covered by conventional field or laboratory experimentation procedures. 相似文献
Under seismic excitation, liquefied clean medium to dense cohesionless soils may regain a high level of shear resistance at large shear strain excursions. This pattern of response, known as a form of cyclic mobility, has been documented by a large body of laboratory sample tests and centrifuge experiments. A plasticity-based constitutive model is developed with emphasis on simulating the cyclic mobility response mechanism and associated pattern of shear strain accumulation. This constitutive model is incorporated into a two-phase (solid–fluid), fully coupled finite element code. Calibration of the constitutive model is described, based on a unique set of laboratory triaxial tests (monotonic and cyclic) and dynamic centrifuge experiments. In this experimental series, Nevada sand at a relative density of about 40% is employed. The calibration effort focused on reproducing the salient characteristics of dynamic site response as dictated by the cyclic mobility mechanism. Finally, using the calibrated model, a numerical simulation is conducted to highlight the effect of excitation frequency content on post-liquefaction ground deformations. 相似文献
An instrumental validation is attempted of an innovative approach devoted to the quick individuation, from macroseismic data, of site amplification phenomena able to significantly modify seismic hazard levels expected on the basis of average propagation effects only. According to this methodology, two evaluations of hazard are performed at each investigated locality: the former, obtained by epicentral intensity data ‘reduced’ at the site through a probabilistic attenuation function and, the latter, computed by integrating such data with seismic effects actually observed at the site during past earthquakes. The comparison, for each locality, between these two hazard estimates allow to orientate the identification of those sites where local amplifications of earthquake ground motion could be significant. In order to check such methodology, indications obtained in this way from macroseismic data are compared with the estimates of transfer functions performed through the HVSR technique applied to microtremors. Results concerning municipalities located in a seismic area of Northern Italy indicate a good agreement between macroseismic and instrumental estimates. 相似文献
Non-linear time domain site response analysis is widely used in evaluating local soil effects on propagated ground motion. This approach has generally provided good estimates of field behavior at longer periods but has shortcomings at relatively shorter periods. Viscous damping is commonly employed in the equation of motion to capture damping at very small strains and employs an approximation of Rayleigh damping using the first natural mode only. This paper introduces a new formulation for the viscous damping using the full Rayleigh damping. The new formulation represents more accurately wave propagation for soil columns greater than 50 m thick and improves non-linear site response analysis at shorter periods. The proposed formulation allows the use of frequency dependent viscous damping. Several examples, including a field case history at Treasure Island, California, demonstrate the significant improvement in computed surface response using the new formulation. 相似文献
The methods used for a building seismic hazard evaluation are presented with the associated results. The goals of the study are (1) to check the soil nature and the existence or not of a possible site effect around the installation and (2) to characterize the dynamic behavior of the building using ambient vibration records.
The results of the soil study with the Nakamura method are very difficult to interpret because they are not stable in space and time. The spectral ratios method has been used with regional earthquake records. The results of the application of this method allowed us to conclude that the installation was free of site effect.
The ambient vibration measurements on the building brought the conclusion to determine the first and second modes of the structure. These results have been used to calibrate numerical model. The modal shapes in plan (high roof) and in elevation (main column) have been evaluated. The damping of the building has been computed using ambient vibration records. 相似文献