Fluid Inclusion Feature of Gold-Bearing Quartz Veins from the Jinniushan Gold Deposit, Shandong, China     

Shen Ping  Shen Yuanchao  Li Guangming  LIU Tiebing  ZENG Qingdong 《世界地质(英文版)》2002,5(2)

The auriferous veins at Jinniushan occurs within the Jinniushan faulted zone in the Kunyushan Granite. Optical observation reveals that gold ore body formed during the main stage of hydrothermal activity. Detailed geothermometric studies of fluid inclusions from the veins show that the forming temperature ranges between 130℃ and 370℃ and the salinity is from 4.01 to 15.21 wvt percent NaCl. The ore-forming fluid is featured by low to moderate salinity, and low to moderate temperature. According to investigations of the values of vapor/liquid and temperatures of the ore-forming fluids, we propose that the boiling fluid inclusions exist in the main mineralization stages. Fluid boiling is suggested as a mechanism for the precipitation of gold from the hydrothermal fluid in the Jinniushan gold deposit.  相似文献   

液核地球自转速率变化的带谐潮效应Ⅱ--数值计算与比较     

张捍卫  郑勇  杜兰  盘关松 《天文研究与技术》2003,(2):67-74

地球自转速率的潮汐变化可由无量纲参数k/cm)(k和cm分别为壳幔的有效Love数和有效极转动惯量)来表征。对于一个具有弹性地幔、平衡海潮和核幔不耦合的地球k/cm=0.944,且与潮波频率无关。海潮的非平衡扰动使k/cm为复数,且与频率有关。大气对自转速率有效勒夫数的贡献约为Δkat=0.0075。同时地幔滞弹性对勒夫数也产生扰动。利用本文得到的理论公式和最新的潮汐数据计算了地球自转速率的潮汐变化,及其有关地球物理机制的影响。  相似文献   

四川石棉独立碲矿床蚀变岩的地质地球化学研究     

银剑钊  陈毓川  周剑雄  杨百川  郭成远 《地球科学与环境学报》1996,(4)

四川石棉大水沟独立碲矿床堪称世界首例，其矿体两侧的围岩蚀变较窄，且蚀变带与矿脉及未蚀变岩呈清楚而截然的接触关系。主要围岩蚀变为白云石化、白（绢）云母化、云英岩化及电气石化等。这些蚀变作用分别发生于１７７．７～１６５．１Ｍａ和９１．７１～８０．１９Ｍａ。蚀变作用过程中ＳｉＯ２大量析出，Ａｌ２Ｏ３、ＴｉＯ２、ＣａＯ、ＭｇＯ、Ｋ２Ｏ、Ｈ２Ｏ、ＣＯ２、Ｆｅ２Ｏ３、ＭｎＯ则有不同程度地带入。与此同时，ＲＥＥ在此过程中包集体迁出，Ｔｅ、Ｂｉ、ＡＳ等元素的含量则决定于蚀变作用及其强度，而与原岩无关。  相似文献   

山东内生金矿矿床谱系及其致矿地质异常          下载免费PDF全文

徐金芳 《山东国土资源》2001,17(2):32-36

矿床谱系是对成矿多样性的理论概括,而成矿多样性又是由不同级别、不同性质的致矿地质异常决定的.本文论述了山东省内生金矿矿床谱系及其致矿地质异常.  相似文献   

凤太矿田层控铅锌(铜)矿床的成矿物质来源探讨     

隗合明  吕仁生 《地球科学与环境学报》1990,(1)

秦岭凤太矿田层控铅锌(铜)矿床的金属物质、硫和成矿溶液主要来自深部基底的岩石,属海底喷流—沉积成因矿床。从这一理论认识出发可进一步分析控矿地质条件及今后在该区有效地寻找同类矿床。  相似文献   

黄金的成色     

刘儒 《吉林地质》1994,13(3):81-83,45

黄金的成色并不是一成不变的，它成色的高低是与成矿温度、成矿阶段、深度、时代、变质程度、水溶液及风化作用等有一定关系，我们从这些关系中可以寻找到我们找矿的捷径和依据。  相似文献   

柿竹园矿床大理岩型锡矿石工艺矿物学研究   总被引：1，自引：0，他引：1  

谭延松 《湖南地质》1991,10(3):223-228

大理岩型锡矿石产于燕山早、中期千里山花岗岩与中、上泥盆统灰岩的外接触带。矿石呈细脉、网脉浸染状,锡矿物有:锡石、黄锡矿,富钛尼日利亚石、尼日利亚石和木锡矿,脉石矿物绿帘石、石榴石、电气石、萤石、方解石及磁黄铁矿等亦含锡,锡主要呈锡的浊立矿物存在,占总锡量的89.78％,其中锡石锡占总锡量的80.01％,其次有呈类质同象形式存在的锡,在绿帘石、石榴石、电气石等矿物中以Sn~(4+)取代Fe~(3+),这类锡占总量的8.33％。工艺矿物学研究表明,该类锡矿石以“贫”、“细”、“杂”为特征。锡不仅十分分散,而且品位偏低,矿石矿物组合及镶嵌关系复杂、相互包裹,紧密连生;锡矿物粒度微细,粒径一般为0.2～0.01mm,部分为<0.0l～0.002mm,是一种难选的锡矿石类型。通过锡的回收试验,采用选冶联合工艺流程,预测锡的最佳回收率可达50％以上。  相似文献   

Fluid geochemistry in the Ivigtut cryolite deposit, South Greenland     

Jasmin Khler  Jens Konnerup-Madsen  Gregor Markl 《Lithos》2008,103(3-4):369-392

The 1.27 Ga old Ivigtut (Ivittuut) intrusion in South Greenland is world-famous for its hydrothermal cryolite deposit [Na₃AlF₆] situated within a strongly metasomatised A-type granite stock. This detailed fluid inclusion study characterises the fluid present during the formation of the cryolite deposit and thermodynamic modelling allows to constrain its formation conditions.Microthermometry revealed three different types of inclusions: (1) pure CO₂, (2) aqueous-carbonic and (3) saline-aqueous inclusions. Melting temperatures range between − 23 and − 15 °C for type 2 and from − 15 to − 10 °C for type 3 inclusions. Most inclusions homogenise between 110 and 150 °C into the liquid.Stable isotope compositions of CO₂ and H₂O were measured from crushed inclusions in quartz, cryolite, fluorite and siderite. The δ¹³C values of about − 5‰ PDB are typical of mantle-derived magmas. The differences between δ¹⁸O of CO₂ (+ 21 to + 42‰ VSMOW) and δ¹⁸O of H₂O (− 1 to − 21.7‰ VSMOW) suggest low-temperature isotope exchange. δD (H₂O) ranges from − 19 to − 144‰ VSMOW. The isotopic composition of inclusion water closely follows the meteoric water line and is comparable to Canadian Shield brines. Ion chromatography revealed the fluid's predominance in Na, Cl and F. Cl/Br ratios range between 56 and 110 and may imply intensive fluid–rock interaction with the host granite.Isochores deduced from microthermometry in conjunction with estimates for the solidification of the Ivigtut granite suggest a formation pressure of approximately 1–1.5 kbar for the fluid inclusions. Formation temperatures of different types of fluid inclusions vary between 100 and 400 °C. Thermodynamic modelling of phase assemblages and the extraordinary high concentration in F (and Na) may indicate that the cryolite body and its associated fluid inclusions could have formed during the continuous transition from a volatile-rich melt to a solute-rich fluid.  相似文献   

Fluid entrapment and reequilibration during subduction and exhumation: A case study from the high-grade Nestos shear zone, Central Rhodope, Greece     

Kurt Krenn  Christoph Bauer  Alexander Proyer  Evripidis Mposkos  Georg Hoinkes 《Lithos》2008,104(1-4):33-53

A fluid inclusion study on metamorphic minerals of successive growth stages was performed on highly deformed paragneisses from the Nestos Shear Zone at Xanthi (Central Rhodope), in which microdiamonds provide unequivocal evidence for ultrahigh-pressure (UHP) metamorphism. The correlation of fluid inclusion density isochores and fluid inclusion reequilibration textures with geothermobarometric data and the relative chronology of micro- and macro-scale deformation stages allow a better understanding of both the fluid and metamorphic evolution along the P–T–d path. Textural evidence for subduction towards the NE is recorded by the orientation of intragranular NE-oriented fluid inclusion planes and the presence of single, annular fluid inclusion decrepitation textures. These textures occur within quartz “foam” structures enclosed in an earlier generation of garnets with prolate geometries and rarely within recrystallized matrix quartz, and reequilibrated both in composition and density during later stages of exhumation. No fluid inclusions pertaining to the postulated ultrahigh-pressure stage for microdiamond-bearing garnet–kyanite–gneisses have yet been found. The prolate shape of garnets developed during the earliest stages of exhumation that is recorded structurally by (L  S) tectonites, which subsequently accommodated progressive ductile SW shearing and folding up to shallow crustal levels. The majority of matrix kyanite and a later generation of garnet were formed during SW-directed shear under plane-strain conditions. Fluid inclusions entrapped in quartz during this stage of deformation underwent density loss and transformed to almost pure CO₂ inclusions by preferential loss of H₂O. Those inclusions armoured within garnet retained their primary 3-phase H₂O–CO₂ compositions. Reequilibration of fluid inclusions in quartz aggregates is most likely the result of recrystallization along with stress-induced, preferential H₂O leakage along dislocations and planar lattice defects which results in the predominance of CO₂ inclusions with supercritical densities. Carbonic fluid inclusions from adjacent kyanite–corundum-bearing pegmatoids and, the presence of shear-plane-parallel fluid inclusion planes within late quartz boudin structures consisting of pure CO₂-fluid inclusions with negative crystal shapes, bear witness of the latest stage of deformation by NE-directed extensional shear.This study shows that the textures of early fluid inclusions that formed already during the prograde metamorphic path can be preserved and used to derive information about the kinematics of subduction that is difficult to obtain from other sources. The textures of early inclusions, together with later generations of unaltered primary and secondary inclusions in metamorphic index minerals that can be linked to specific deformation stages and even P–T conditions, are a welcome supplement for the reconstruction of a rather detailed P–T–d path.  相似文献   

Fluid and source magma evolution of the Questa porphyry Mo deposit,New Mexico,USA   总被引：14，自引：1，他引：13  

Leonhard M. Klemm  Thomas Pettke  Christoph A. Heinrich 《Mineralium Deposita》2008,43(5):533-552

Combined fluid inclusion microthermometry and microanalysis by laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS) are used to constrain the hydrothermal processes forming a typical Climax-type porphyry Mo deposit. Molybdenum mineralisation at Questa occurred in two superimposed hydrothermal stages, a magmatic-hydrothermal breccia and later stockwork veining. In both stages, texturally earliest fluids were single-phase, of low salinity (~7 wt.% NaCl_equiv.) and intermediate-density. Upon decompression to ~300 bar, they boiled off a vapour phase, leaving behind a residual brine (up to 45 wt.% NaCl_equiv) at temperatures of ~420°C. The highest average Mo concentrations in this hot brine were ~500 μg/g, exceeding the Mo content of the intermediate-density input fluid by about an order of magnitude and reflecting pre-concentration of Mo by fluid phase separation prior to MoS₂ deposition from the brine. Molybdenum concentrations in brine inclusions, then, decrease down to 5 μg/g, recording Mo precipitation in response to cooling of the saline liquid to ~360°C. Molybdenite precipitation from a dense, residual and probably sulphide-depleted brine is proposed to explain the tabular shape of the ore body and the absence of Cu-Fe sulphides in contrast to the more common Cu-Mo deposits related to porphyry stocks. Cesium and Rb concentrations in the single-phase fluids of the breccia range from 2 to 8 and from 40 to 65 μg/g, respectively. In the stockwork veins, Cs and Rb concentrations are significantly higher (45–90 and 110–230 μg/g, respectively). Because Cs and Rb are incompatible and hydrothermally non-reactive elements, the systematic increase in their concentration requires two distinct pulses of fluid exsolution from a progressively more fractionated magma. By contrast, major element and ore metal concentrations of these two fluid pulses remain essentially constant. Mass balance calculations using fluid chemical data from LA-ICPMS suggest that at least 25 km³ of melt and 7 Gt of deep input fluid were necessary to provide the amount of Mo contained in the stockwork vein stage alone. While the absolute amounts of fluid and melt are uncertain, the well-constrained element ratios in the fluids together with empirical fluid/melt partition coefficients derived from the inclusion analyses suggest a high water content of the source melt of ~10%. In line with other circumstantial evidence, these results suggest that initial fluid exsolution may have occurred at a confining pressure exceeding 5 kbar. The source of the molybdenum-mineralising fluids probably was a particularly large magma chamber that crystallised and fractionated in the lower crust or at mid-crustal level, well below the shallow intrusions immediately underlying Questa and other porphyry molybdenum deposits. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.  相似文献