排序方式： 共有8条查询结果，搜索用时 21 毫秒
1
1.
2.
Takashi Sano Takaaki Fukuoka Toshiaki Hasenaka 《Geostandards and Geoanalytical Research》2004,28(3):443-448
We determined chlorine contents in nine GSJ (Geological Survey of Japan) reference materials (JB-1, 1a, 2, 3; JA-1, 2, 3; JR-1, 2) by prompt gamma neutron activation analysis, employing the standard addition method. Pressed powder disks of each reference material were used for neutron irradiation and gammaray measurement, after known quantities (25-200 μl) of sodium chloride solution were added. The influence of the nearby sodium peak overlap was checked, and fluctuations in the chlorine count rate were corrected using silicon as an internal standard. The slopes of calibration lines for seven reference materials (JB-1, 2, 3; JA-1, 2, 3; JR-2) and SiO2 powders fall within 5% error, and their chlorine values were obtained from the intercepts. Chlorine contents in JB-1 a and JR-1 were also determined by using the calibration lines. Our chlorine values ranged from 26.1 to 934 μg g-1 , which agrees well with the previously reported values. 相似文献
3.
Takashi Sano Toshiaki Hasenaka Hiroyuki Sawahata Takaaki Fukuoka 《Geostandards and Geoanalytical Research》2006,30(1):31-37
Prompt gamma neutron activation analysis was applied to the determination of the titanium, potassium, samarium and gadolinium contents of nine Geological Survey of Japan (GSJ) reference materials (JB-1, 1a, 2, 3; JA-1, 2, 3; JR-1, 2). Firstly, the values in JB-1 were determined by the standard addition method: pressed powder disks of JB-1 were used for neutron irradiation and gamma-ray measurements, after known quantities of standard reagents had been added. Secondly, the contents of eight other reference materials were determined by comparison methods using JB-1 as the comparative standard. The precision of analyses were obtained by replicate determinations on these samples. The relative standard deviation was generally less than 5%. For most samples, analysed values agreed well (< 5%) with the recommended values. 相似文献
4.
Hiroshi Tsuno Atsuyuki Ohta Hiroyuki Kagi Noboru Imai Hiroaki Tao Masaharu Nomura 《Geostandards and Geoanalytical Research》2006,30(1):55-62
The oxidation states of chromium in GSJ JSO-2 (artificially contaminated soil) and three other geochemical reference materials (GSJ JSO-1, JLS-1 and JMS-1) were observed using X-ray near edge structure (XANES). For comparison, other artificially contaminated soil materials (mimic-JSO-2) were prepared by adding Cr(VI) into JSO-1. Their oxidation states of chromium were determined using XANES. The chromium contents were 1118 μg g-1 for JSO-2, 1352 μg g-1 for mimic-JSO-2 and 69-113 μg g-1 for the other reference materials. Most chromium was present as hexavalent in mimic-JSO-2. No hexavalent species were detected in other samples. These results for chromium oxidation state in JSO-2 and mimic-JSO-2 obtained with XANES resembled those obtained from a chemical extraction method. The present JSO-2 has no trace of Cr(VI), although Cr(VI) was added as a major species during preparation. On the other hand, the content of Cr(VI) obtained in mimic-JSO-2 agreed with the original Cr(VI) content. A time-elapse study showed that Cr(VI) contents in mimic-JSO-2 decreased gradually to 70% of the original abundance during 240-day preservation in dry conditions. Moreover, the abundance of Cr(VI) decreased markedly to 15% after 240 days in the wet mimic-JSO-2 containing 20% m/m of water. These experiments suggested that soil humidity enhanced the reduction of Cr(VI) and that Cr(VI) was reduced even in dry conditions. Consequently, it is reasonable to infer that Cr(VI) doped into JSO-2 was completely reduced to Cr(III) during the preservation period of 5 years. The certification of the long-term stability of the chemical form in reference materials will be much more important in future. 相似文献
5.
6.
Kenji Shimizu Takaaki Itai Minoru Kusakabe 《Geostandards and Geoanalytical Research》2006,30(2):121-129
A simple and accurate method to determine fluorine and chlorine contents in small amounts (∼ 30 mg) in rock has been developed using ion chromatography after extraction by alkaline fusion. Powdered sample was mixed with sodium carbonate and zinc oxide at a mass ratio of 1:3:1, and was fused in an electric furnace at 900 °C for 30-40 minutes. An aqueous solution obtained by dissolving the fused silicate rock was diluted to the appropriate concentration of sodium carbonate (< ∼ 24 mmol l-1 ) to minimise the tailing effect on F- during ion chromatography caused by the large amount of carbonate species originating from the flux. Fluorine and chlorine contents were then determined by a standard additions method. Based on the relative standard deviation of the backgrounds, detection limits of both fluorine and chlorine were ∼ 4 μg g-1 , when 30 mg test portions were fused and diluted by a factor of 1200. We also report new fluorine and chlorine contents in nine GSJ (Geological Survey of Japan) reference materials, including peridotite (JP-1), granite (JG-1a), basalts (JB-1b, 2 and 3), andesites (JA-1 and 2) and rhyolites (JR-1 and 2). Fluorine and chlorine contents in the reference materials in this study were consistent with previously reported values. Reproducibilities were < 10 % for samples with F and Cl concentrations of > 20 μg g-1 and < 20 % with F and Cl < 20 μg g-1 . 相似文献
7.
Shigeru Terashima Kohei Sato Masahiro Taniguchi Takashi Okai Noboru Imai 《Geostandards and Geoanalytical Research》2003,27(3):259-271
Two new geochemical reference materials, copper ore JCu-1 and zinc ore JZn-1 have been prepared by the Geological Survey of Japan (GSJ) for the determination of major and minor elements and isotopic compositions. JCu-1 is a sample of Cu-bearing sulfide ore typical of the Kamaishi mine in Iwate Prefecture, Japan, and is composed mainly of hedenbergite, chalcopyrite, quartz and calcite. Pyrrhotite, magnetite and actinolitic amphibole were also commonly found. The Zn-rich ore, JZn-1 is a crude ore from the Kamioka Pb-Zn mine in Gifu Prefecture, Japan. The sample consists of hedenbergite, quartz, calcite, sphalerite and epidote as main crystalline phase. Homogeneity test results showed that all studied constituents including ore elements such as Cu, Pb and Zn can be considered to be homogeneously distributed. Provisional collaborative analyses were carried out in ten laboratories, and the data were evaluated using a robust statistical method using z-scores. Recommended values for a number of major elements including TiO2 , Al2 O3 , MnO, MgO, CaO, Na2 O, K2 O, Fe (total), Zn, Cu and Pb were established. In addition, information values for eighteen major, minor and trace elements are presented to support future collaborative analyses. 相似文献
8.
1998 Compilation of Analytical Data for Five GSJ Geochemical Reference Samples: The "Instrumental Analysis Series" 总被引：1，自引：0，他引：1
Noboru Imai Shigeru Terashima Shiro Itoh Atsushi Ando 《Geostandards and Geoanalytical Research》1999,23(2):223-250
Analytical data for five GSJ (Geological Survey of Japan) reference samples, the "Instrumental analysis series" received by October 1998, are compiled. The data reported in publications and personal communications were evaluated statistically, taking into account the analytical method and sample preparation. Based on the selected available data, recommended and preferred values for fourteen major and fifty one minor and trace elements are proposed. 相似文献
1