排序方式： 共有14条查询结果，搜索用时 394 毫秒
1.
Suction buckets differ with their easy and cost-efficient installation technique from other foundation types for offshore wind turbines. For successful completion of their installation process, suction is essential, but the imposed seepage leads to the changes in states of the soil in and around the bucket. Especially, a loosening of soil inside the bucket affects the load carrying behaviour of bucket subjected to repetitive loading resulting from environmental conditions. In this study, the behaviour of buckets under cyclic axial compressive loads with considering a possible loosening and related changes in permeability of soil inside the bucket is investigated numerically. In the framework of finite element analysis, a fully coupled two-phase model and a hypoplastic constitutive model are used to describe the saturated sandy soil behaviour under repetitive loading. The porosity-permeability variation is taken into account by Kozeny–Carman relationship. Special attention is dedicated to load carrying behaviour of bucket top plate, inner and outer skirt as well as base and their changes resulting from a loosening of soil inside the bucket with variable aspect ratio. For this purpose, cyclic axial compressive loads which cause an attenuation and progressive failure of soil-bucket system response are considered. The main findings on the changes in load carrying behaviour of bucket are presented and discussed. 相似文献
2.
通过镇江市邮电通信指挥中心大楼深基坑工程的设计与施工,全面介绍了组合钢支撑在深基坑支护工程应用中的设计、施工方法及支撑效果.实践证明,组合钢支撑是一种施工方法简单、施工速度快、对周边环境影响小、安全可靠的支撑形式,具有较强的市场竞争能力及良好的推广应用前景. 相似文献
3.
4.
Knut H. Andersen Philippe Jeanjean Dirk Luger Hans Petter Jostad 《Ocean Engineering》2005,32(7):845-863
Three centrifuge model tests were performed in normally consolidated Speswhite Kaolin to study the penetration of suction anchors in soft clay. The suction anchors could be penetrated by means of underpressure to a depth of about 12.4 to a little more than 14.5 times the diameter. When the anchors were penetrated by underpressure, all clay displaced by the skirt moved into the anchor. At a penetration depth of about half the maximum penetration depth, the volume of the soil heave inside the anchor actually increased more than the volume of the displaced clay. When a material coefficient of 1.5 against plug failure was mobilized, more than the clay displaced by the skirts had accumulated inside the anchor. The penetration resistance increased by 42 and 26% during rest periods of 4.5 and 0.8 days prototype time, respectively. Some uncertainty in the shear strength of the clay beds gave some uncertainty with respect to the interpretation, but the observed behaviour generally confirmed the theoretical analyses. 相似文献
5.
6.
This paper presents a simplified analytical model: the X-shaped cylindrical cavity expansion method (XCEM), which can be used to interpret and predict the displacement, stress, and excess pore pressure caused by the X-section cast in place concrete (XCC) pile installation in soft soil. Analytical solutions for the displacement and strain field are obtained with a streamlined solution, base on the strain path method (SPM). The stress and excess pore pressure can then be subsequently determined with the assumption of the elastic-perfectly plastic soil behavior. A positive agreement was found when the theoretical prediction of the displacement, stress, and excess pores pressure was compared against the field measurements. The proposed XCEM improves the conventional cavity expansion method (CEM) and offers a framework for understanding the non-circular cross-section penetrator problem, which is different from the conventional circular penetrator problem. 相似文献
7.
The paper presents numerical simulations investigating the settlement reduction caused by stone columns in a natural soft clay. The focus is on the influence of the soft soil alteration caused by column installation. A uniform mesh of end-bearing columns under a distributed load was considered. Therefore, the columns were modelled using the “unit cell” concept, i.e. only one column and the corresponding surrounding soil in axial symmetry. The properties of the soft clay correspond to Bothkennar clay, which is modelled using S-CLAY1 and S-CLAY1S, which are Cam clay type models that account for anisotropy and destructuration. The Modified Cam clay model is also used for comparison. Column installation was modelled independently to avoid mesh distortions, and soft soil alteration was directly considered in the initial input values. The results show that the changes in the stress field, such as the increase of radial stresses and mean stresses and the loss of overconsolidation, are beneficial for high loads and closely spaced columns but, on the contrary, may be negative for low loads, widely spaced columns and overconsolidated soils. Moreover, whilst the rotation of the soil fabric reduces the settlement, in contrast the soil destructuration during column installation reduces the improvement. 相似文献
8.
Giovanni Spagnoli Cristina de Hollanda Cavalcanti Tsuha 《Marine Georesources & Geotechnology》2020,38(9):1118-1120
AbstractA closure on the recent discussion regarding the review on the behavior of helical piles as a potential offshore foundation system by the Authors is presented. Installation torque, uplift capacity, installation effects, model pile, installation speed and results proposed by Discussers are commented. 相似文献
9.
Offshore wind power is a rapidly growing area of electricity in China. In the present paper, interaction mechanisms between the caisson for wind turbines and saturated silt sand are investigated with laboratory tests based on two different installation methods, jacking installation and suction installation. For the jacking installation process, the results indicate that the soil pressures inner and outer the skirt of the caisson vary with a similar feature and the magnitudes of the two are nearly balanced. The tip resistance plays a key role in the total jacking installation resistance. This paper examines the predictive performance of qc method and API approach for jacking installation resistance. It is demonstrated that the qc method provides better predictions. The resistance coefficients are recommended. For the case of suction installation, however, the changes of soil pressures inner and outer the skirt are contrasting. Specifically, the inner pressure and tip resistance fall dramatically, but the outer pressure increases when suction is applied. Seepage effect is found to be an important mechanism for the installation of suction caisson. The reduction ratios of the inner friction and tip resistance follow a power-function with the normalized suction. Based on the test results, a prediction method for the required suction has been developed and evaluated. 相似文献
10.
This paper presents a theoretical model for investigating the installation effect of high pressure jet grouting column in soft clay. The model is formulated by assuming the installation process as a series of pressure-controlled spherical cavity expansion in semi-infinite soil, of which the approximate solutions are derived by combining use of two fundamental solutions of spherical cavity expansion in finite spherical symmetry soil and displacement-controlled spherical cavity expansion in semi-infinite soil. The approximate solutions are then validated by comparing the predictions with FEM results as well as published results. The comparison results show that the presented approximate solutions are suitable for the problem of pressure-controlled spherical cavity expansion in semi-infinite soil, particularly in evaluating the limit expansion pressure as well as the expansion pressure-ground surface displacement relation. Subsequently, the proposed approximately solutions are applied to interpret the limit injection pressure and the grouting pressure-ground surface displacement during the installation process of HPJ-GC. Some parametric studies are also conducted. Furthermore, an instrumented field test study of HPJ-GC is conducted in the thick soft soils comprising quaternary alluvial and marine deposits of the Lianyungang-Yancheng Highway located in Jiangsu Province, China. The measured ground heave is compared with the analytical predictions using the proposed theoretical model. Reasonable agreement is achieved. 相似文献