排序方式: 共有6条查询结果,搜索用时 15 毫秒
1
1.
给出的卫星激光测距的二轴系统实现了通过软件控制望远镜coude光路调整、接收系统SPAD和APD的自动切换、视场光阑大小的自动调节、以及发射光束指向的精确控制。该系统是基于MPC07运动控制卡,通过人机交互界面进行实时控制,旨在实现不同功能的调节,提高卫星激光测距的自动化程度。详细介绍了该系统的硬件组成、技术指标及软件工作方式。 相似文献
2.
通过测试不同Cl~-(NaCl)掺量磷酸镁水泥(MPC)浸取液中离子浓度及MPC硬化体的孔结构和吸水率,研究了Cl~-掺量和浸取时间对MPC硬化体平均孔径、孔隙率、孔径分布、孔体积分布、吸水率、MPC浸取液中Cl~-、Na~+、OH~-、Mg~(2+)、PO■和K~+浓度的影响,结果表明外掺Cl~-对MPC孔结构、离子溶出及吸水率有显著影响,当Cl~-掺量为1%时,MPC硬化体结构密实、孔隙率低、平均孔径小、吸水率小、MPC水化产物在水中的溶蚀量小。 相似文献
3.
M. Maldonado A. Desbiens R. del Villar 《International Journal of Mineral Processing》2009,93(1):26-33
A constrained model predictive control (MPC) strategy is proposed to deal with the problem of optimizing flotation column operation using secondary variables. Froth depth, collection zone gas hold-up and bias rate are selected as secondary variables to be controlled whereas tailing, wash-water and gas flow rate are used as manipulated variables. The control problem was formulated in order to minimize the tracking error of the gas hold-up and bias rate by maintaining gas flow rate, wash-water flow rate and bias rate within their operational limits. In particular, a strategy was conceived to optimize the column flotation process based on establishing an unreachable high set point for the gas hold-up (which is equivalent to maximizing the bubble surface area available for particle collection at a given flotation reagent dosage and thus recovery), while simultaneously satisfying operational constraints (such as ensuring a positive bias rate to prevent gangue entrainment and therefore concentrate grade deterioration). Several other operational constraints on wash-water, gas rate, gas hold-up and bias rate were considered, their use being justified from a processing point of view. Since this study deals with the hydrodynamic characteristics of flotation columns, a pilot flotation column working with a two-phase system is sufficient to demonstrate the advantages of using predictive control for this process optimization. 相似文献
4.
采用磷酸镁水泥(MPC)对铅污染土进行固化/稳定化处理。基于无侧限抗压强度试验和渗透试验,研究了MPC添加量、水土比对固化污染土强度及渗透特性的影响规律。结果表明,固化土的强度随MPC添加量增加而增大,渗透系数减小;水土比对固化土的强度及渗透特性的影响均存在临界值,为0.45。低于临界值时,固化土的强度随着水土比的增加而增加,渗透系数随着水土比的增加而减小。压汞试验(MTP)结果表明,随MPC添加量的增大,固化土孔隙体积减小,水土比不超过临界值时,固化土孔隙体积随着水土比的增大而减小。扫描电镜试验结果表明,随着MPC添加量的增加,土颗粒团聚化越明显,胶结程度加强;水土比不超过临界值时,土颗粒团聚体增多。镁钾磷酸盐晶体(MKP)主要通过减少孔径大于1 ?m的孔隙体积来影响固化土的强度和渗透特性。 相似文献
5.
RapidIO高速串行总线作为新一代嵌入式系统互连总线,具有高速度、低延时、高可靠性等特性,同时能够很好地适应高速互连协议的规模化应用的要求。RapidIO互连架构是一个开放的标准,可应用于连接多处理器、存储器和通用计算平台。介绍了RapidIO互联体系的层次、主要协议以及系统拓扑结构,在MPC8548E处理器及Tsi578交换芯片组成的RapidIO互连系统硬件平台上进行基于VxWorks操作系统的RapidIO驱动开发,实现Ra-pidIO的主要功能,如读写、消息传递、门铃事务等,验证了RapidIO的基本功能。 相似文献
6.
负温下磷酸镁水泥混凝土的力学性能与抗冻性能 总被引:1,自引:1,他引:0
研究了磷酸镁水泥(MPC)混凝土在20℃、-10℃、-15℃、-20℃养护环境下的力学性能和抗冻性能,为MPC混凝土应用于寒区旱区的抢修工程提供科学依据。MPC混凝土力学性能按照国标GB/T 50081-2002进行试验,抗冻性能按照GB/T 50082-2009进行试验。结果表明:20℃养护条件下,MPC混凝土的28 d抗压强度达到65.3 MPa,抗折强度达到6.8 MPa;-10℃养护条件下,28 d抗压强度达到59.7 MPa,抗折强度达到7.2 MPa;300次快速冻融循环后,-10℃养护条件下MPC混凝土质量损失率为3.5%,相对动弹性模量为83.5%,抗冻性能优于20℃养护条件下的MPC混凝土。-10℃养护条件下MPC混凝土力学性能和抗冻性能优异,可用于寒区旱区的抢修工程。 相似文献
1