Yields of Nucleosynthesis from massive and intermediate mass stars and constraints on their final evolution     

D. C. V. Mallik  Sushma V. Mallik 《Journal of Astrophysics and Astronomy》1985,6(3):113-130

Nucleosynthetic yields and production rates of helium and heavy elements are derived using new initial mass functions which take into account the recent revisions in O star counts and the stellar models of Maeder (1981a, b) which incorporate the effects of massloss on evolution. The current production rates are significantly higher than the earlier results due to Chiosi & Caimmi (1979) and Chiosi (1979), and a near-uniform birthrate operating over the history of the galactic disc explains the currently observed abundances. However, the yields are incompatibly high, and to obtain agreement it is necessary to assume that stars above a certain mass do not explode but proceed to total collapse. Further confirmation of this idea comes from the consideration of the specific yields and production rates of oxygen, carbon and iron and the constraints imposed by the observational enrichment history in the disc as discussed by Twarog & Wheeler (1982). Substantial amounts of⁴He and¹⁴C, amongst the primary synthesis species, are contributed by the intermediate mass stars in their wind phases. If substantial numbers of them exploded as Type I SN, their contribution to the yields of¹²C and⁵⁶Fe would be far in excess of the requirements of galactic nucleosynthesis. Either efficient massloss precludes such catastrophic ends for these stars, or the current stellar models are sufficiently in error to leave room for substantial revisions in the specific yields. The proposed upward revision of the¹²C (α,γ)¹⁶O rate may produce the necessary changes in stellar yields to provide a solution to this problem. Stars that produce most of the metals in the Galaxy are the same ones that contribute most to the observed supernova rate.  相似文献   

Detailed <Superscript>40</Superscript>Ar/<Superscript>39</Superscript>Ar dating of geologic events associated with the Mantos Blancos copper deposit,northern Chile     

Verónica Oliveros  Gilbert Féraud  Luis Aguirre  Luis Ramírez  Michel Fornari  Carlos Palacios  Miguel Parada 《Mineralium Deposita》2008,43(3):281-293

The ⁴⁰Ar/³⁹Ar geochronological method was applied to date magmatic and hydrothermal alteration events in the Mantos Blancos mining district in the Coastal Cordillera of northern Chile, allowing the distinction of two separate mineralization events. The Late Jurassic Mantos Blancos orebody, hosted in Jurassic volcanic rocks, is a magmatic-hydrothermal breccia-style Cu deposit. Two superimposed mineralization events have been recently proposed. The first event is accompanied by a phyllic hydrothermal alteration affecting a rhyolitic dome. The second mineralization event is related to the intrusion of bimodal stocks and sills inside the deposit. Because of the superposition of several magmatic and hydrothermal events, the obtained ⁴⁰Ar/³⁹Ar age data are complex; however, with a careful interpretation of the age spectra, it is possible to detect complex histories of successive emplacement, alteration, mineralization, and thermal resetting. The extrusion of Jurassic basic to intermediate volcanic rocks of the La Negra Formation is dated at 156.3 ± 1.4 Ma (2σ) using plagioclase from an andesitic lava flow. The first mineralization event and associated phyllic alteration affecting the rhyolitic dome occurred around 155–156 Ma. A younger bimodal intrusive event, supposed to be equivalent to the bimodal stock and sill system inside the deposit, is probably responsible for the second mineralization event dated at ca. 142 Ma. Other low-temperature alteration events have been dated on sericitized plagioclase at ca. 145–146, 125, and 101 Ma. This is the first time that two distinct mineralization events have been documented from radiometric data for a copper deposit in the metallogenic belt of the Coastal Cordillera of northern Chile. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.  相似文献   

The sandstone-hosted stratiform copper mineralization at Mwitapile and its relation to the mineralization at Lufukwe, Lufilian foreland, Democratic Republic of Congo   总被引：2，自引：0，他引：2  

Hamdy A. El Desouky  Philippe Muchez  Roger Tyler 《Ore Geology Reviews》2008,34(4):561-579

The Lufilian foreland is a triangular-shaped area located in the SE of the Democratic Republic of Congo and to the NE of the Lufilian arc, which hosts the well-known Central African Copperbelt. The Lufilian foreland recently became an interesting area with several vein-type (e.g., Dikulushi) and stratiform (e.g., Lufukwe and Mwitapile) copper occurrences. The Lufilian foreland stratiform Cu mineralization is, to date, observed in sandstone rock units belonging to the Nguba and Kundelungu Groups (Katanga Supergroup).The Mwitapile sandstone-hosted stratiform Cu prospect is located in the north eastern part of the Lufilian foreland. The host rock for the Cu mineralization is the Sonta Sandstone of the Ngule Subgroup (Kundelungu Group). A combined remote sensing, petrographic and fluid inclusion microthermometric analysis was performed at Mwitapile and compared with similar analysis previously carried out at Lufukwe to present a metallogenic model for the Mwitapile- and Lufukwe-type stratiform copper deposits. Interpretation of ETM+ satellite images for the Mwitapile prospect and the surrounding areas indicate the absence of NE–SW or ENE–WSW faults, similar to those observed controlling the mineralization at Lufukwe. Faults with these orientations are, however, present to the NW, W, SW and E of the Mwitapile prospect. At Mwitapile, the Sonta Sandstone host rock is intensely compacted, arkosic to calcareous with high silica cementation (first generation of authigenic quartz overgrowths). In the Sonta Sandstone, feldspar and calcite are present in disseminated, banded and nodular forms. Intense dissolution of these minerals caused the presence of disseminated rectangular, pipe-like and nodular dissolution cavities. Sulfide mineralization is mainly concentrated in these cavities. The hypogene sulfide minerals consist of two generations of pyrite, chalcopyrite, bornite and chalcocite, separated by a second generation of authigenic quartz overgrowth. The hypogene sulfide minerals are replaced by supergene digenite and covellite. Fluid inclusion microthermometry on the first authigenic quartz phase indicates silica precipitation from an H₂O–NaCl–CaCl₂ fluid with a minimum temperature between 111 and 182 °C and a salinity between 22.0 and 25.5 wt.% CaCl₂ equiv. Microthermometry on the second authigenic quartz overgrowths and in secondary trails related to the mineralization indicate that the mineralizing fluid is characterized by variable temperatures (Th = 120 to 280 °C) and salinities (2.4 to 19.8 wt.% NaCl equiv.) and by a general trend of increasing temperatures with increasing salinities.Comparison between Mwitapile and Lufukwe indicates that the stratiform Cu mineralization in the two deposits is controlled by similar sedimentary, diagenetic and structural factors and likely formed from a similar mineralizing fluid. A post-orogenic timing is proposed for the mineralization in both deposits. The main mineralization controlling factors are grain size, clay and pyrobitumen content, the amount and degree of feldspar and/or calcite dissolution and the presence of NE–SW to ENE–WSW faults. The data support a post-orogenic fluid-mixing model for the Mwitapile- and Lufukwe-type sandstone-hosted stratiform Cu deposits, in which the mineralization is related to the mixing between a Cu-rich hydrothermal fluid, with a temperature up to 280 °C and a maximum salinity of 19.8 wt.% NaCl equiv., with a colder low salinity reducing fluid present in the sandstone host rock. The mineralizing fluid likely migrated upwards to the sandstone source rocks along NE–SW to ENE–WSW orientated faults. At Lufukwe, the highest copper grades at surface outcrops and boreholes were found along and near to these faults. At Mwitapile, where such faults are 2 to 3 km away, the Cu grades are much lower than at Lufukwe. Copper precipitation was possibly promoted by reduction from pre-existing hydrocarbons and non-copper sulfides and by the decrease in fluid salinity and temperature during mixing. Based on this research, new Cu prospects were proposed at Lufukwe and Mwitapile and a set of recommendations for further Cu exploration in the Lufilian foreland is presented.  相似文献   

金川镍铜矿床数学模型对深部矿化变化趋势的指示     

田毓龙  把多恒  高志武  洪托  陈兴义  卢耀军 《地质与勘探》2008,44(1):82-88

按矿化特征将金川X矿区主矿体分为致密块状特富矿、海绵状富矿和浸染状贫矿.应用MicroMine软件对3类矿化体分别建立了数学模型,并应用距离平方反比法对模型单元块进行了镍、铜品位估值.通过分析和对比矿床数学模型900m至1300m不同水平剖面上的Ni、Cu品位及Ni/Cu比值的变化,得出在X矿区的中部西侧是一个Ni和Cu的矿化中心,并且向深部Cu的矿化强度高于Ni.  相似文献   

南黄海表层沉积物天然湿容重和含水量的分布及其与粒度之间的关系   总被引：2，自引：0，他引：2  

徐善民 《海洋科学》1991,15(3):38-41

本文论述了南黄海表层沉积物天然湿容重和含水量的分布,并利用回归分析的方法讨论了容重和含水量与粒度之间的关系。结果表明,容重和含水量与粘土粒级相关性最好,容重与粘土粒级含量(相似文献   

Local Distribution and Seasonal Variation of Fe, Pb, Zn, Cu, Cd, Na, K, Ca, and Mg Concentrations in the Seagrass Cymodocea nodosa (ucria) Aschers. in the Antikyra Gulf, Greece     

P. Malea  S. Haritonidis 《Marine Ecology》1995,16(1):41-56

  相似文献   

菊花岛海区沉积物类型及矿物特征初探     

宋云香  张永华 《海洋湖沼通报》1994,(1):9-16

本文对菊花岛海区沉积物类型，重矿物和粘土矿物组合分区及其分布特征进行了分析，同时对测区沉积物来源进行探讨。  相似文献   

Fe(OH)_3胶体与铜离子作用的研究     

张恩仁  田玉红  张正斌  刘莲生 《热带海洋学报》2001,(4)

使用切向流超滤系统得到粒度较均匀的Fe(OH)3胶体,进而对Fe(OH)3胶体粒子与Cu2 的作用进行了研究,并将实验结果与南沙群岛海区表层水中铜与胶体物质结合状况的调查数据进行了比较分析,得到如下结果:(1)在海水介质中,铜在Fe(OH)3胶体上结合的百分率(pH>5)随pH的升高而下降,随着Fe(OH)3胶体浓度的减小而下降?(2)在天然海水介质中,使铜在Fe(OH)3胶体上结合的百分率在50%-70%的有机物浓度为1.0mg·L-1,有机物浓度的增大使铜与无机胶体结合的百分率有下降的趋势?  相似文献   

Optimum Sample Size to Detect Perturbation Effects: The Importance of Statistical Power Analysis – A Critique     

Marco Ortiz 《Marine Ecology》2002,23(1):1-9

Abstract. The current article describes statistical power analysis as an efficient strategy for the estimation of the optimum sample size. The principle aim is constructively to criticise and enrich the results presented by Mouillot et al. (1999) , who estimate the optimum sample size for evaluating possible perturbations. The authors did not make any reference to statistical power analysis, even though their objective clearly went beyond a simple stock evaluation to assess management strategies in a particular marine ecosystem. Surprisingly, they proposed (a priori) an ANOVA design to test a hypothesis considering both space and temporal scales. However, the authors did not cover important topics related with power analysis and the precautionary principle, both used into environment impact assessment programmes for marine ecosystems. Based on their results and on statistical power analysis, it is demonstrated that the variability (dispersion statistics), a key factor they used to estimate the sample size, is less relevant than the magnitude of perturbation (effect size). Therefore, a greater effort must be devoted to estimate the effect size of a particular phenomenon rather than a desired variability.  相似文献   

氨基酸在粘土高岭石上吸附等温线的研究   总被引：2，自引：0，他引：2  

刘效兰  张正斌 《海洋科学》2002,26(9):1-4

研究了4种氨基酸（甘氨酸，赖氨酸，天冬氨酸，谷氨酸）在粘土高岭石上的吸附等温线以及金属铜离子对其等温线的影响。研究表明，氨基酸在高岭石上的吸附等温线以及金属铜离子存在时的吸附等温线均属Langmuir型等温线；铜离子浓度增加时，其等温线斜率也增加，并认为体系可形成Ⅰ型三元表面络合物，铜离子对氨基酸在高岭石上等温线影响的规律和在相同体系中它对氨基酸在高岭石上交换吸附百分率E（%）-pH曲线的影响规律相一致。  相似文献