软硬互层金刚石复合片钻头在地浸砂岩型铀矿中的研究及应用          下载免费PDF全文

要二仓  邢预恩  杨爱军 《探矿工程》2008,35(1):68-70

针对近年在巴音戈壁盆地及鄂尔多斯盆地钻探所遇到的复杂地质情况,研究试验了PDC钻头,在地浸砂岩铀矿钻探生产中取得了良好的效果,并制定总结了相应的钻进参数.  相似文献   

地震折射波的虚拟射线理论及其应用     

焦湘恒  王修田 《中国海洋大学学报(自然科学版)》1987,(2)

本文提出了一种地震折射液的虚拟射线理论,根据该理论,只要已知地表层的速度,即可直接由折射波信息提取地震参数,从而可实现折射界面的反演。 文中通过实际介质模型的计算机实验结果,验证了该理论的正确性。  相似文献   

Action of Cnoidal Waves on Vertical Walls     

Qiu Dahong  Zang Jun  Jia Ying Academician of the Chinese Academy of Sciences  Professor  the State Key Laboratory of Coastal  Offshore Engineering 《中国海洋工程》1996,(2)

Based on the 2nd order cnoidal wave theory, the characters of shallow water standing waves and their action on vertical walls are studied in this paper. The theoretical expressions of the wave surface elevation in front of and the wave pressure on the vertical wall are obtained. In order to verify the theoretical results, model tests were made in the State Key Laboratory of Coastal and Offshore Engineering at DUT. For the wave surface elevation in front of the wall and the wave forces on the wall at the moment when the wave surface at the wall surface goes down to the bottom of the wave trough, the calculated results coincide quite well with the experimental results. For the wave forces on the wall at the moment when the wave surface at the wall surface goes up to the top of the wave crest, the theoretical expressions are modified by the experimental results. For the convenience of practical use, calculations are made for the wave conditions which usually occur in enginering practice by use of the inves  相似文献   

斜坡提砌石护面厚度的计算     

张怀慧  李玉成 《海洋工程》2002,20(2):14-18

介绍了斜坡式防波堤砌石护面中的插砌条石和干砌块石在波浪作用下的力学图式及作用机理 ,重点给出考虑摩擦力作用时的砌石块体稳定厚度的计算公式 ,并结合工程实例验证了公式的适用性  相似文献   

随机载荷下的疲劳损伤计算公式     

伍义生 《海洋工程》1994,(1)

本文推导了随机载荷下的疲劳损伤计算公式。数值计算结果表明：Ｐ．Ｈ．Ｗｉｒｓｃｈｉｎｇ给出的公式在宽带情况下与实际情况不符；Ｇ．Ｃｈａｕｄｈｕｒｙ给出的公式在窄带情况下与实际不符；本文绘出的公式不仅适合于窄带，也适合于具有各种不同带宽的宽带随机载荷。  相似文献   

长江口泥沙絮凝静水沉降动力学模式的试验研究   总被引：10，自引：1，他引：10  

关许为  陈英祖 《海洋工程》1995,(1)

细颗粒泥沙在咸水中的絮凝沉降是河流泥沙向海输送过程中在河口区发生的重要现象，是河口拦门沙形成与发育的主要原因之一。本文根据室内模拟试验研究，提出长江口泥沙絮凝静水沉降的二级动力学模式，通过该式求得不同泥沙含量和盐度情况下絮凝沉降的衰减系数，半衰期和平均沉降速率等动力学参数，定量地分析泥沙含量和盐度对泥沙絮凝沉降过程的影响。  相似文献   

高斯投影公式的机助推导     

殷海峰  白征东  程伯辉 《测绘科学》2008,33(2):7-9

随着GPS应用的普及,高斯投影在测量中出现的机会越来越多。许多文献上都给出了推导过程,这个推导过程的运算量是非常大的,而且计算精度难于提高。经过研究,一种易于编程的递推公式被发现,虽然这个公式在计算量上没有减少,但是可以较好地解决精度问题。  相似文献   

About the specification of erosion flux for soft stratified cohesive sediments     

Georges Chapalain  Y. Peter Sheng  André T. Temperville 《Mathematical Geology》1994,26(6):651-676

The present paper deals with the specification of bed erosion flux that accounts for the effects of sediment-induced stratification in the water column. Owing to difficulties in measuring the bed shear stress _b and the erosive shear strength _s, we suggest a series of methods that combine laboratory and numerical experiments. A simplified turbulent transport model that includes these effects helps to quantify _b and _s. Focusing on soft stratified beds, the present study considers erosion rate formulas of the form =_f exp {[T_b-T_s]} where is a model constant (=1 for Gularte's (1978) formula and =1/2 for Parchure's (1984) formula). First, the bed erosive strength profile _s(Z) is adjusted by forcing the turbulent transport model with measured erosion rates. Second, three procedures are suggested to determine the erosion rate formula coefficients _f and : a global procedure and two different layer-by-layer procedures. Each procedure is applied to an erosion experiment conducted in a rotating annular flume by Villaret and Paulic (1986). The use of the layer-by-layer procedure based on a least squares fitting technique provides a closer fit than the global procedure. The present study points out the complementarity of experimental and numerical approaches and also suggests possible improvements in laboratory test procedures.  相似文献   

用于砾石夹层钻进的新型PDC钻头的研制与使用          下载免费PDF全文

李天明  李大佛  陈洪俊  雷艳  刘红旗 《探矿工程》2006,33(8):57-60,63

无压浸渍工艺生产的PDC石油钻头钻遇砾石夹层不适应。根据砾石夹层砾石坚硬、软硬互层、非均质、研磨性强的特点，研究了新型PDC钻头，在钻头结构上主要采取外抛内锥带辅助切削齿的结构形式，在复合片上主要采用非平面结合方式，即采用双向多条直槽非平面结合。按此方案设计与生产了3只钻头，分别在3口井试用，直接钻穿砾石夹层馆陶组地层井段，钻井效率提高26%，突破了砾石夹层钻进不能使用PDC钻头的禁区。  相似文献   

PDC钻头切削齿破岩载荷规律的分析     

许爱 《探矿工程》2006,33(7):59-61

对PDC钻头冠部形状及不同的布齿密度和切削齿在不同的磨损状态下对PDC钻头切削齿受力的影响进行了分析；用相邻的3个切削齿之间的关系(不同的切削齿与切削齿之间的径向距离和切削齿之间的高度差)来分析PDC钻头冠部形状和切削齿布齿密度对切削齿受力的影响，以及将切削齿的磨损状态简化成与切削齿在钻头上装配方向垂直的平面来分析切削齿磨损状态对切削齿受力的影响。  相似文献