Compression reference of soil structure evaluation with reconstituted clays at different initial water contents     

Ling-Ling Zeng  Zhen-Shun Hong  Yu-Jun Cui  Martin D. Liu 《Marine Georesources & Geotechnology》2018,36(7):759-767

  相似文献   

Influence of soft clays on the response spectra for structures in eastern Canada     

Ren  Tinawi  Marc Sarrazin  Andr  Filiatrault 《Soil Dynamics and Earthquake Engineering》1993,12(8):469-477

The 1990 edition of the National Building Code of Canada (Associate Committee of the National Building Code, National Research Council, Ottawa, 1990) makes a clear distinction between eastern and western Canada in terms of seismic acceleration and velocity zones. While it is well established that ground motions can be amplified significantly through loose clay deposits, no results are available that take into consideration the typical high frequency content of ground motions in eastern Canada. This paper develops ground amplification curves for clays having depths between 10 and 70 m excited by typical eastern Canadian ground motions scaled to two different values of peak horizontal accelerations. Simplified free-field spectral design curves, which could be used by structural designers, are proposed. The curves show that maximum spectral accelerations occur for structural periods between 0.2 and 0.5 s. In addition, soil depth does not appear to be an important parameter controlling the response of typical clay deposits in eastern Canada.  相似文献   

SANICLAY: simple anisotropic clay plasticity model     

Yannis F. Dafalias  Majid T. Manzari  Achilleas G. Papadimitriou 《国际地质力学数值与分析法杂志》2006,30(12):1231-1257

SANICLAY is a new simple anisotropic clay plasticity model that builds on a modification of an earlier model with an associated flow rule, in order to include simulations of softening response under undrained compression following K_o consolidation. Non‐associativity is introduced by adopting a yield surface different than the plastic potential surface. Besides, the isotropic hardening of the yield surface both surfaces evolve according to a combined distortional and rotational hardening rule, simulating the evolving anisotropy. Although built on the general premises of critical state soil mechanics, the model induces a critical state line in the void ratio–mean effective stress space, which is a function of anisotropy. To ease interpretation, the model formulation is presented firstly in the triaxial stress space and subsequently, its multiaxial generalization is developed systematically, in a form appropriate for implementation in numerical codes. The SANICLAY is shown to provide successful simulation of both undrained and drained rate‐independent behaviour of normally consolidated sensitive clays, and to a satisfactory degree of accuracy of overconsolidated clays. The new model requires merely three constants more than those of the modified Cam clay model, all of which are easily calibrated from well‐established laboratory tests following a meticulously presented procedure. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

DEM analysis of the crack propagation in brittle clays under uniaxial compression tests   总被引：2，自引：0，他引：2  

Luis F. Vesga  Luis E. Vallejo  Sebastian Lobo‐Guerrero 《国际地质力学数值与分析法杂志》2008,32(11):1405-1415

  相似文献   

A Note on Soil Structure Resistance of Natural Marine Deposits   总被引：1，自引：1，他引：1  

洪振舜刘松玉  刘志方 《中国海洋工程》2004,18(2):321-326

It has been well documented that natural normally-consolidated marine soils are generally subjected to the effects of soil structure. The interpretation of the resistance of soil structure is an important issue in the theory study and engineering practice of ocean engineering and geotechnical engineering. It is traditionally considered that the resistance of soil structure gradually disappears with increasing stress level when the applied stress is beyond the consolidation yield stress. In this study, however, it is found that this traditional interpretation of the resistance of soil structure can not explain the strength behavior of natural marine deposits with a normally-consolidated stress history A new interpretation of the resistance of soil structure is proposed based on the strength behavior. In the preyield state, the undrained strength of natural marine deposits is composed of two components: one developed by the applied stress and the other developed by the resistance of soil structure. When the applied stress is beyond the consolidation yield stress, the strength behavior is independent of the resistance of soil structure.  相似文献   

Sample Disturbance in Soft and Sensitive Clays: Analysis and Assessment     

K. Nagendra Prasad  S. Triveni  T. Schanz  Late T. S. Nagaraj 《Marine Georesources & Geotechnology》2007,25(3):181-197

Despite the sophisticated methods employed to obtain high quality samples, they are prone to disturbance, due to stress release, let apart, due to sampling tools and techniques adopted. Critical reappraisal of different methods suggest that any method of sample quality assessment involving strength and deformation parameters would enable easier implementation and correct other engineering parameters for estimated sample disturbance. In this technical paper, sample disturbance index, using merely the slopes of compression paths, (representing mechanical response), in the pre- and post-yield stress regimes under odeometric loading conditions is proposed. This method is based on single oedometer test results on samples of unknown degrees of disturbance during sampling and handling. The unique feature of this approach is that the ideal rigid plastic material behavior is taken as reference. This eliminates the need for any additional experimental data or any calculations from the relationships formulated with any set of assumptions.  相似文献   

Natural and man-induced stress evolution of slopes: the Monte Mario hill in Rome     

F. Bozzano  S. Martino  M. Priori 《Environmental Geology》2006,50(4):505-524

The paper deals with stress-release effects induced by man-made cuts or excavations into natural stiff clay slopes that experienced erosion in response to valley deepening. The study was focused on the Monte Mario hill in Rome (Italy), which formed part of an area of recent urban expansion. The methodology of the study relied on a reference engineering-geology model, which was developed on the basis of site and laboratory data and stress–strain analyses. The latter analyses were carried out with the finite-difference code FLAC 4.0. Numerical modelling was based on a sequential approach, taking into account the main evolutionary stages of the Tiber river valley in Romeȁ9s urban area and then making cuts at the bottom of the slope located south of the Monte Mario Astronomical Observatory. The simulation revealed the stress-release effects that fluvial erosion and excavation fronts have caused on the investigated slopes and their consequent gravitational instabilities. These processes appear with metre-scale displacements, followed by stress-release cracks (actually observed on the slopes under review). In quantifying stress-release deformations, the simulation took into account the possible role of creep in the observed retardation of stress-release effects.Research activities were carried on with the co-operation of Dȁ9Arcangelo A. (Consorzio TREESSE, andrea.darcangelo@libero.it) and Moretti S. (IMG S.r.l. Servizi Tecnici per lȁ9Ingegneria e lȁ9Ambiente, moretti@img-srl.it)  相似文献   

A Solution to the Problem of Predicting the Suitability of Silty–clayey Materials for Cement-stabilization     

Evangelos I. Stavridakis 《Geotechnical and Geological Engineering》2006,24(2):379-398

Major geotechnical problems in construction involving silty–clayey soils are due to their low strength, durability and high compressibility of soft soils, and the swell–shrink nature of the overconsolidated swelling soils. Confronted with these problems, a suitable ground improvement technique is needed, for deep excavations in soft clays, for stability, durability and deformation control. Cement-stabilization is one of the alternatives. An increase in strength and durability, reduction in deformability are the main aims of this method. Conventional cement-stabilization methods are used mainly for surface treatment. However, the use of cement has recently been extended to a greater depth in which cement columns were installed to act as a type of soil reinforcement (deep cement–soil mixing and cement jet grouting). In situ engineering properties of these silty–clayey soils are often variable and difficult to predict. For this reason cement-stabilization methods have a basic target to control the aforementioned engineering properties of these clays so that the properties of a silty–clayey soil become more like the properties of a soft rock such as clayey shale or lightly cemented sandstone. So cement-stabilization of these soils is essential to control their engineering properties and to predict their engineering behaviour for construction. In an effort to predict, classify and study the suitability of silty–clayey soils for cement-stabilization both slaking and unconfined compressive strength tests were carried out on clayey–sand mixtures consisted of two types of clays, kaolin and bentonite. Finally diagrams were prepared to study the variation of slaking and strength due to compaction, curing time and cement percentage and also to predict areas of efficient cement-stabilization.  相似文献   

柱撑粘土矿物层间域的性质及其环境意义   总被引：10，自引：3，他引：10  

吴平霄  叶代启  明彩兵 《矿物岩石地球化学通报》2002,21(4):228-233

柱撑粘土矿物是近年来胺国内外矿物学广泛关注的矿物材料之一。柱撑粘土矿物层间域是一个特殊的化学反应场所。本系统评述了氮氧化物、重金属离子、阴离子、肥料养分及有机污染物等环境污染物在柱撑粘土矿物层间域中的催化还原、吸附、脱附、控释及光催化反应机理，着重阐述了柱撑粘土矿物的层间域性质，讨论了它们的环境化学行为对环境的影响和意义。  相似文献   

层柱粘土材料制备与应用研究   总被引：9，自引：1，他引：9  

周春晖  葛忠华  李春生  李小年 《矿物岩石地球化学通报》2002,21(4):242-246

简述了层柱粘土矿物材料研究与应用的现状和进展。利用粘土矿物蒙脱石作母体，通过大体积的铝、锆、硅等交联剂插层可制成层柱多孔材料，在酸催化、氧化还原催化中均有十分广阔的应用前景。研究表明，改进制备工艺后可提高层柱蒙脱石的热稳定性、比表面积和催化活性；通过酸或表面活性剂等预处理，再进行粘土的支撑，可以调节和控制层柱粘土的结构与性能；采用有机改性和模板导向等技术，可获得孔径介于大微孔和中孔之间的新型层柱粘土矿物材料，并应用于大分子催化反应与吸附，为粘土矿物材料合成和应用开辟了新方向。  相似文献