Reliability assessment of granular filters in embankment dams     

Roberto Mínguez  Fernando Delgado  Ignacio Escuder  Manuel G. de Membrillera 《国际地质力学数值与分析法杂志》2006,30(10):1019-1037

Empirical criteria have been used successfully to design filters of most embankment large dam projects throughout the world. However, these empirical rules are only applicable to a particular range of soils tested in laboratory and do not take into account the variability of the base material and filter particle sizes. In addition, it is widely accepted that the safety of fill dams is mainly dependent on the reliability of their filter performance. The work herein presented consists in a new general method for assessing the probability of fulfilling any empirical filter design criteria accounting for base and filter heterogeneity by means of first‐order reliability methods (FORM), so that reliability indexes and probabilities of fulfilling any particular criteria are obtained. This method will allow engineers to estimate the safety of existing filters in terms of probability of fulfilling their design criteria and might also be used as a decision tool on sampling needs and material size tolerances during construction. In addition, sensitivity analysis makes possible to analyse how reliabilities are influenced by different sources of input data. Finally, in case of a portfolio risk assessment, this method will allow engineers to compare the safety of several existing dams in order to prioritize safety investments and it is expected to be a very useful tool to evaluate probabilities of failure due to internal erosion. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

Elastic solutions for stresses in a transversely isotropic half‐space subjected to three‐dimensional buried parabolic rectangular loads     

Cheng‐Der Wang  Jyh‐Jong Liao 《国际地质力学数值与分析法杂志》2002,26(14):1449-1476

In many areas of engineering practice, applied loads are not uniformly distributed but often concentrated towards the centre of a foundation. Thus, loads are more realistically depicted as distributed as linearly varying or as parabola of revolution. Solutions for stresses in a transversely isotropic half‐space caused by concave and convex parabolic loads that act on a rectangle have not been derived. This work proposes analytical solutions for stresses in a transversely isotropic half‐space, induced by three‐dimensional, buried, linearly varying/uniform/parabolic rectangular loads. Load types include an upwardly and a downwardly linearly varying load, a uniform load, a concave and a convex parabolic load, all distributed over a rectangular area. These solutions are obtained by integrating the point load solutions in a Cartesian co‐ordinate system for a transversely isotropic half‐space. The buried depth, the dimensions of the loaded area, the type and degree of material anisotropy and the loading type for transversely isotropic half‐spaces influence the proposed solutions. An illustrative example is presented to elucidate the effect of the dimensions of the loaded area, the type and degree of rock anisotropy, and the type of loading on the vertical stress in the isotropic/transversely isotropic rocks subjected to a linearly varying/uniform/parabolic rectangular load. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

紫阳滑坡治理工程实例分析     

刘满全 《地球科学与环境学报》1994,(2)

本文介绍紫阳骨坡治理工程中有关抗滑桩的设计与施工。文中详细地论述了设计中设计人员应根据工程的具体情况去灵活处理的一些技术问题，如确定有关参数的选择原则，计算上的条件简化和一些具体技术细节的处理方法等．  相似文献   

Centrifugal test of a road embankment built after new dredger fill on thick marine clay     

Fayun Liang  Mingyi Zhao  Chengrui Qin  Yajie Jia  Zhongwei Wang  Guiping Yue 《Marine Georesources & Geotechnology》2020,38(1):114-121

Abstract

The construction of a 100-km road network is planned on a land reclamation area in the Oujiang Estuary in China. The embankment had a height of 4 m and a base width of 60 m. The reclamation area is newly filled by a 3-m dredger fill on a 48-m thick layer of marine clay. Estimation of the settlement of the future road network is difficult. To guide the construction of the road network, a 1/100-scale centrifuge model test was performed with a marine clay sample from the construction site to simulate the layered settlements and evaluate the drainage effect of prefabricated vertical drains in the dredger fill in the following 10 years. The results of the centrifuge modeling test are verified by 10-month in situ monitoring, which shows agreement between the centrifuge modeling test results and the in situ results. The test results indicate that additional time is needed to reinforce the newly added dredger fill by the surcharge preloading method to uplift the elevation of the reclamation area with dredger fill.  相似文献   

Inertial and hydrodynamic inertial loads on floating units     

Marcelo Ramos Martins   《Ocean Engineering》2007,34(16):2146-2160

The analysis of the dynamic behavior of floating units usually employs a coordinate system with origin in the unit's center of gravity, which significantly simplifies the global mass matrix. Hydrodynamic coefficients are then computed considering the same coordinate system. However, to analyze other conditions of mass distribution and maintain the simplicity of a global mass matrix, it is necessary to determine again the hydrodynamic coefficients, thereby reducing the efficiency of the entire process. Another important point is that the geometries frequently used in floating units are such that the cross-terms of an added mass are relatively unimportant when compared with the main terms, and it is, therefore, common to use only some of them to analyze the unit's dynamic behavior. Recently, however, in the search for production systems suitable for water depths greater than 3000 m, other geometries have been considered in technical and economic feasibility studies. It is possible that for these new geometries all terms of the added mass matrix must be included in the analysis. This paper presents the full development used to determine the complete global mass matrix, the inertial and hydrodynamic inertial loads that make use of the added mass matrices considering any coordinate system and the six degrees of freedom, including all cross-terms.  相似文献   

海洋环境荷载下输液立管的静、动力特性研究   总被引：1，自引：1，他引：1  

郭海燕  王树青  刘德辅 《中国海洋大学学报(自然科学版)》2001,31(4):605-611

考虑管内流动流体和管外海洋环境荷载共同作用 ,建立海洋立管侧向运动微分方程。用Hermite插值函数离散 ,在微机上编写海洋立管静、动力分析程序 ,通过计算分析研究管内流体对立管侧向变形和应力的作用 ;另外 ,探讨管内流体的流动速度和立管顶端的预张力对立管动力特性的影响。结果表明 ,立管变形和应力均随管内流体流动速度增加而增大 ,同时内流速度的增大会降低立管的固有频率 ,但适当增大立管顶端预张力会抵消内流流速增加引起的固有频率下降。  相似文献   

青藏高原清水河多年冻土区铁路路基沉降变形特征研究   总被引：3，自引：1，他引：3  

李忠  徐文明  陈明长 《工程地质学报》2006,14(6):824-829

通过埋设在青藏铁路路基中两个断面内的6条沉降观测管3 a来的地基沉降变形资料,研究了高原多年冻土区铁路路基的沉降变形特征,分析了填筑铁路路基对下伏多年冻土融化变形的影响。研究表明,由于受到填筑路基时赋存在路基填料内的热量的影响,铁路路基下伏多年冻土上限在施工初期会有一个明显的下移沉降,铁路路基也随之有一个较大幅度的工后下沉变动,随着时间的推移,路基下降速率会逐渐下降,但在短时间内不会停止下来,而且由于太阳辐射和路基边坡形状的影响,路基向阳面与背阴面的变形有较大的差别,且在近南北向展布的路基上表现最为明显。  相似文献   

基于气象因子的华中电网负荷预测方法研究   总被引：7，自引：0，他引：7       下载免费PDF全文

胡江林  洪斌等 《应用气象学报》2002,13(5):600-608

在分析各种节假日负荷变化规律的基础上, 利用气象因子作预报变量, 使用动态的综合线性回归和自回归相结合的混合线性回归方法及非线性的人工神经网络方法来进行华中电网日负荷和日最大负荷及日最小负荷的预测。对12个月共365天的独立样本试预报表明, 该客观方案对华中电网负荷的预测精度可满足业务调度的需要。  相似文献   

薄钢板剪力墙抗震性能试验研究   总被引：15，自引：6，他引：15  

苏幼坡  刘英利  王绍杰 《地震工程与工程振动》2002,22(4):81-84

通过4个薄钢板剪力墙和1个钢筋混凝土框架的试验，研究了薄钢板剪力墙在低周往复荷载作用下的刚度、承载力、延性和耗能性能。试验表明，利用薄钢板剪力墙在低周往复荷载作用下的刚度、承载力、延性和耗能性能。试验表明，利用薄钢板剪力墙作为抗侧力构件是可行的。在钢筋混凝土框架中设置薄钢板可有效地增加刚度，承载力和耗能性能。  相似文献   

Atmospheric nitrogen inputs into the North Sea: effect on productivity     

Gerrit de Leeuw  Lucinda Spokes  Tim Jickells  Carsten Ambelas Skjth  Ole Hertel  Elisabetta Vignati  Susanne Tamm  Michael Schulz  Lise-Lotte Srensen  Britta Pedersen  Laura Klein  K. Heinke Schlünzen 《Continental Shelf Research》2003,23(17-19):1743

The ANICE (Atmospheric Nitrogen Inputs into the Coastal Ecosystem) project addressed the atmospheric deposition of nitrogen to the North Sea, with emphasis on coastal effects. ANICE focused on quantifying the deposition of inorganic nitrogen compounds to the North Sea and the governing processes. An overview of the results from modelling and experimental efforts is presented. They serve to identify the role of the atmosphere as a source of biologically essential chemical species to the marine biota. Data from the Weybourne Atmospheric Observatory (UK) are used to evaluate the effect of short episodes with very high atmospheric nitrogen concentrations. One such episode resulted in an average deposition of 0.8 mmol N m⁻² day⁻¹, which has the potential to promote primary productivity of 5.3 mmol C m⁻² day⁻¹. This value is compared to long-term effects determined from model results. The total calculated atmospheric deposition to the North Sea in 1999 is 948 kg N km⁻¹, i.e. 0.19 mmol N m⁻² day⁻¹ which has the potential to promote primary productivity of 1.2 mmol C m⁻² day⁻¹. Detailed results for August 1999 show strong gradients across the North Sea due to adjacent areas where emissions of NO_x and NH₃ are among the highest in Europe. The average atmospheric deposition to the southern part of the North Sea in August 1999 could potentially promote primary production of 2.0 mmol C m⁻² day⁻¹, i.e. 5.5% of the total production at this time of the year in this area of the North Sea. For the entire study area the atmospheric contribution to the primary production per m² is about two-third of this value. Most of the deposition occurs during short periods with high atmospheric concentrations. This atmospheric nitrogen is almost entirely anthropogenic in origin and thus represents a human-induced perturbation of the ecosystem.  相似文献